Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Suwan Kim <suwan.kim027@gmail.com>
To: shuah@kernel.org, valentina.manea.m@gmail.com,
	gregkh@linuxfoundation.org, stern@rowland.harvard.edu
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Suwan Kim <suwan.kim027@gmail.com>
Subject: [PATCH v5 1/2] usbip: Skip DMA mapping and unmapping for urb at vhci
Date: Fri,  9 Aug 2019 00:54:34 +0900
Message-ID: <20190808155435.10050-2-suwan.kim027@gmail.com> (raw)
In-Reply-To: <20190808155435.10050-1-suwan.kim027@gmail.com>

vhci doesn’t do DMA for remote device. Actually, the real DMA
operation is done by network card driver. vhci just passes virtual
address of the buffer to the network stack, so vhci doesn’t use and
need dma address of the buffer of the URB.

But HCD provides DMA mapping and unmapping function by default.
Moreover, it causes unnecessary DMA mapping and unmapping which
will be done again at the NIC driver and it wastes CPU cycles.
So, implement map_urb_for_dma and unmap_urb_for_dma function for
vhci in order to skip the DMA mapping and unmapping procedure.

When it comes to supporting SG for vhci, it is useful to use native
SG list (urb->num_sgs) instead of mapped SG list because DMA mapping
fnuction can adjust the number of SG list (urb->num_mapped_sgs).
And vhci_map_urb_for_dma() prevents isoc pipe from using SG as
hcd_map_urb_for_dma() does.

Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
---
v4 - v5
- Replace pr_err() with dev_err() in the error path.

v3 - v4
- Replace WARN_ON() with pr_err() in the error path.

v2 - v3
- Move setting URB_DMA_MAP_SG flag to the patch 2.
- Prevent isoc pipe from using SG buffer.

v1 - v2
- Add setting URB_DMA_MAP_SG flag in urb->transfer_flags to tell
stub driver to use SG buffer.
---
 drivers/usb/usbip/vhci_hcd.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c
index 000ab7225717..ea82b932a2f9 100644
--- a/drivers/usb/usbip/vhci_hcd.c
+++ b/drivers/usb/usbip/vhci_hcd.c
@@ -1288,6 +1288,22 @@ static int vhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
 	return 0;
 }
 
+static int vhci_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
+				gfp_t mem_flags)
+{
+	if (usb_endpoint_xfer_isoc(&urb->ep->desc) && urb->num_sgs) {
+		dev_err(&urb->dev->dev, "SG is not supported for isochronous transfer\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void vhci_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
+{
+	dev_dbg(hcd->self.controller, "vhci does not unmap urb for dma\n");
+}
+
 static const struct hc_driver vhci_hc_driver = {
 	.description	= driver_name,
 	.product_desc	= driver_desc,
@@ -1304,6 +1320,9 @@ static const struct hc_driver vhci_hc_driver = {
 
 	.get_frame_number = vhci_get_frame_number,
 
+	.map_urb_for_dma = vhci_map_urb_for_dma,
+	.unmap_urb_for_dma = vhci_unmap_urb_for_dma,
+
 	.hub_status_data = vhci_hub_status,
 	.hub_control    = vhci_hub_control,
 	.bus_suspend	= vhci_bus_suspend,
-- 
2.20.1


  reply index

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-08 15:54 [PATCH v5 0/2] usbip: Implement SG support Suwan Kim
2019-08-08 15:54 ` Suwan Kim [this message]
2019-08-08 16:18   ` [PATCH v5 1/2] usbip: Skip DMA mapping and unmapping for urb at vhci shuah
2019-08-13 18:34     ` shuah
2019-08-22 16:40   ` Greg KH
2019-08-22 22:19     ` Suwan Kim
2019-08-08 15:54 ` [PATCH v5 2/2] usbip: Implement SG support to vhci-hcd and stub driver Suwan Kim
2019-08-08 16:21   ` shuah
2019-08-13 18:36     ` shuah
2019-08-22  1:52     ` Suwan Kim
2019-08-14 13:19 ` [PATCH v5 0/2] usbip: Implement SG support Christoph Hellwig
2019-08-15 13:23   ` Greg KH
2019-08-15 14:10     ` shuah
2019-08-15 15:25       ` Suwan Kim

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190808155435.10050-2-suwan.kim027@gmail.com \
    --to=suwan.kim027@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=shuah@kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=valentina.manea.m@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git