Linux-USB Archive on
 help / color / Atom feed
From: Linus Walleij <>
To: Hans Ulli Kroll <>,
	Florian Fainelli <>,,
	Greg Kroah-Hartman <>
Cc: Linus Walleij <>
Subject: [PATCH] usb: host: fotg2: restart hcd after port reset
Date: Sat, 10 Aug 2019 17:04:58 +0200
Message-ID: <> (raw)

From: Hans Ulli Kroll <>

On the Gemini SoC the FOTG2 stalls after port reset
so restart the HCD after each port reset.

Signed-off-by: Hans Ulli Kroll <>
Signed-off-by: Linus Walleij <>
 drivers/usb/host/fotg210-hcd.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 35f69bce40d9..8ee28f5b7957 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -1633,6 +1633,10 @@ static int fotg210_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 			/* see what we found out */
 			temp = check_reset_complete(fotg210, wIndex, status_reg,
 					fotg210_readl(fotg210, status_reg));
+			/* restart schedule */
+			fotg210->command |= CMD_RUN;
+			fotg210_writel(fotg210, fotg210->command, &fotg210->regs->command);
 		if (!(temp & (PORT_RESUME|PORT_RESET))) {

                 reply index

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on

Archives are clonable:
	git clone --mirror linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ \
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone