Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Matthew Michilot <matthew.michilot@gmail.com>
To: Johan Hovold <johan@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Matthew Michilot <matthew.michilot@gmail.com>
Subject: [PATCH v2] USB: serial: ftdi_sio: add support for FT232H CBUS gpios
Date: Thu, 15 Aug 2019 17:40:54 +0000
Message-ID: <20190815174054.20240-1-matthew.michilot@gmail.com> (raw)
In-Reply-To: <20190808222348.4428-1-matthew.michilot@gmail.com>

Enable support for cbus gpios on FT232H. The cbus configuration is
stored in one word in the EEPROM at byte-offset 0x1a with the mux
config for ACBUS5, ACBUS6, ACBUS8 and ACBUS9 (only pins that can be
configured as I/O mode).

Tested using FT232H by configuring one ACBUS pin at a time.

Signed-off-by: Matthew Michilot <matthew.michilot@gmail.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
---
V2:
- made hex notation all lowercase for consistency
- allocated 4 bytes instead of 2 bytes for buffer
- improved documentation on FT232H CBUS memory mapping
- fixed CBUS pins being incorrectly mapped to the wrong gpios
- sorted case labels alphabetically
---
 drivers/usb/serial/ftdi_sio.c | 43 +++++++++++++++++++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 4b3a049561f3..01e4ecccd079 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2023,6 +2023,46 @@ static int ftdi_read_eeprom(struct usb_serial *serial, void *dst, u16 addr,
 	return 0;
 }
 
+static int ftdi_gpio_init_ft232h(struct usb_serial_port *port)
+{
+	struct ftdi_private *priv = usb_get_serial_port_data(port);
+	u8 *buf;
+	u16 cbus_config;
+	int ret;
+	int i;
+
+	buf = kmalloc(4, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = ftdi_read_eeprom(port->serial, buf, 0x1a, 4);
+	if (ret < 0)
+		goto out_free;
+
+	/*
+	 * FT232H CBUS Memory Map
+	 *
+	 * 0x1a: X- (upper nibble -> AC5)
+	 * 0x1b: -X (lower nibble -> AC6)
+	 * 0x1c: XX (upper nibble -> AC9 | lower nibble -> AC8)
+	 */
+	cbus_config = buf[2] << 8 | (buf[1] & 0xf) << 4 | (buf[0] & 0xf0) >> 4;
+
+	priv->gc.ngpio = 4;
+	priv->gpio_altfunc = 0xff;
+
+	for (i = 0; i < priv->gc.ngpio; ++i) {
+		if ((cbus_config & 0xf) == FTDI_FTX_CBUS_MUX_GPIO)
+			priv->gpio_altfunc &= ~BIT(i);
+		cbus_config >>= 4;
+	}
+
+out_free:
+	kfree(buf);
+
+	return ret;
+}
+
 static int ftdi_gpio_init_ft232r(struct usb_serial_port *port)
 {
 	struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -2098,6 +2138,9 @@ static int ftdi_gpio_init(struct usb_serial_port *port)
 	int result;
 
 	switch (priv->chip_type) {
+	case FT232H:
+		result = ftdi_gpio_init_ft232h(port);
+		break;
 	case FT232RL:
 		result = ftdi_gpio_init_ft232r(port);
 		break;
-- 
2.17.1


  parent reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-08 22:23 [PATCH] " Matthew Michilot
2019-08-13  9:00 ` Johan Hovold
2019-08-13  9:02 ` Johan Hovold
2019-08-15 17:40 ` Matthew Michilot [this message]
2019-08-28 13:39   ` [PATCH v2] " Johan Hovold

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190815174054.20240-1-matthew.michilot@gmail.com \
    --to=matthew.michilot@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=johan@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org linux-usb@archiver.kernel.org
	public-inbox-index linux-usb


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/ public-inbox