linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 1/1] usb: chipidea: udc: don't do hardware access if gadget has stopped
@ 2019-08-16  2:48 Peter Chen
  0 siblings, 0 replies; 2+ messages in thread
From: Peter Chen @ 2019-08-16  2:48 UTC (permalink / raw)
  To: linux-usb; +Cc: dl-linux-imx, Peter Chen, stable

After _gadget_stop_activity is executed, we can consider the hardware
operation for gadget has finished, and the udc can be stopped and enter
low power mode. So, any later hardware operations (from usb_ep_ops APIs
or usb_gadget_ops APIs) should be considered invalid, any deinitializatons
has been covered at _gadget_stop_activity.

I meet this problem when I plug out usb cable from PC using mass_storage
gadget, my callstack like: vbus interrupt->.vbus_session->
composite_disconnect ->pm_runtime_put_sync(&_gadget->dev),
the composite_disconnect will call fsg_disable, but fsg_disable calls
usb_ep_disable using async way, there are register accesses for
usb_ep_disable. So sometimes, I get system hang due to visit register
without clock, sometimes not.

The Linux Kernel USB maintainer Alan Stern suggests this kinds of solution.
See: http://marc.info/?l=linux-usb&m=138541769810983&w=2.

Cc: <stable@vger.kernel.org> #v4.9+
Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
This patch is at NXP internal tree long time, and no issues have found.
Submit to mainline kenrel.

 drivers/usb/chipidea/udc.c | 32 ++++++++++++++++++++++++--------
 1 file changed, 24 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c
index 053432d79bf7..8f18e7b6cadf 100644
--- a/drivers/usb/chipidea/udc.c
+++ b/drivers/usb/chipidea/udc.c
@@ -709,12 +709,6 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
 	struct ci_hdrc    *ci = container_of(gadget, struct ci_hdrc, gadget);
 	unsigned long flags;
 
-	spin_lock_irqsave(&ci->lock, flags);
-	ci->gadget.speed = USB_SPEED_UNKNOWN;
-	ci->remote_wakeup = 0;
-	ci->suspended = 0;
-	spin_unlock_irqrestore(&ci->lock, flags);
-
 	/* flush all endpoints */
 	gadget_for_each_ep(ep, gadget) {
 		usb_ep_fifo_flush(ep);
@@ -732,6 +726,12 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
 		ci->status = NULL;
 	}
 
+	spin_lock_irqsave(&ci->lock, flags);
+	ci->gadget.speed = USB_SPEED_UNKNOWN;
+	ci->remote_wakeup = 0;
+	ci->suspended = 0;
+	spin_unlock_irqrestore(&ci->lock, flags);
+
 	return 0;
 }
 
@@ -1303,6 +1303,10 @@ static int ep_disable(struct usb_ep *ep)
 		return -EBUSY;
 
 	spin_lock_irqsave(hwep->lock, flags);
+	if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) {
+		spin_unlock_irqrestore(hwep->lock, flags);
+		return 0;
+	}
 
 	/* only internal SW should disable ctrl endpts */
 
@@ -1392,6 +1396,10 @@ static int ep_queue(struct usb_ep *ep, struct usb_request *req,
 		return -EINVAL;
 
 	spin_lock_irqsave(hwep->lock, flags);
+	if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) {
+		spin_unlock_irqrestore(hwep->lock, flags);
+		return 0;
+	}
 	retval = _ep_queue(ep, req, gfp_flags);
 	spin_unlock_irqrestore(hwep->lock, flags);
 	return retval;
@@ -1415,8 +1423,8 @@ static int ep_dequeue(struct usb_ep *ep, struct usb_request *req)
 		return -EINVAL;
 
 	spin_lock_irqsave(hwep->lock, flags);
-
-	hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
+	if (hwep->ci->gadget.speed != USB_SPEED_UNKNOWN)
+		hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
 
 	list_for_each_entry_safe(node, tmpnode, &hwreq->tds, td) {
 		dma_pool_free(hwep->td_pool, node->ptr, node->dma);
@@ -1487,6 +1495,10 @@ static void ep_fifo_flush(struct usb_ep *ep)
 	}
 
 	spin_lock_irqsave(hwep->lock, flags);
+	if (hwep->ci->gadget.speed == USB_SPEED_UNKNOWN) {
+		spin_unlock_irqrestore(hwep->lock, flags);
+		return;
+	}
 
 	hw_ep_flush(hwep->ci, hwep->num, hwep->dir);
 
@@ -1559,6 +1571,10 @@ static int ci_udc_wakeup(struct usb_gadget *_gadget)
 	int ret = 0;
 
 	spin_lock_irqsave(&ci->lock, flags);
+	if (ci->gadget.speed == USB_SPEED_UNKNOWN) {
+		spin_unlock_irqrestore(&ci->lock, flags);
+		return 0;
+	}
 	if (!ci->remote_wakeup) {
 		ret = -EOPNOTSUPP;
 		goto out;
-- 
2.17.1


^ permalink raw reply related	[flat|nested] 2+ messages in thread
* [PATCH 0/1] usb: chipidea: fix for v5.3-rc
@ 2019-08-20  2:07 Peter Chen
  2019-08-20  2:07 ` [PATCH 1/1] usb: chipidea: udc: don't do hardware access if gadget has stopped Peter Chen
  0 siblings, 1 reply; 2+ messages in thread
From: Peter Chen @ 2019-08-20  2:07 UTC (permalink / raw)
  To: gregkh; +Cc: linux-usb, Peter Chen

Hi Greg,

When the driver enables runtime pm, it may cause the system hang
when plug out the cable from PC. The patch fixes this issue by
avoiding hardware accessing at this situation.

Peter Chen (1):
  usb: chipidea: udc: don't do hardware access if gadget has stopped

 drivers/usb/chipidea/udc.c | 32 ++++++++++++++++++++++++--------
 1 file changed, 24 insertions(+), 8 deletions(-)

-- 
2.17.1


^ permalink raw reply	[flat|nested] 2+ messages in thread
end of thread, other threads:[~2019-08-20  2:08 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-16  2:48 [PATCH 1/1] usb: chipidea: udc: don't do hardware access if gadget has stopped Peter Chen
2019-08-20  2:07 [PATCH 0/1] usb: chipidea: fix for v5.3-rc Peter Chen
2019-08-20  2:07 ` [PATCH 1/1] usb: chipidea: udc: don't do hardware access if gadget has stopped Peter Chen

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).