From: Christoph Hellwig <hch@lst.de>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Maxime Chevallier <maxime.chevallier@bootlin.com>
Cc: Gavin Li <git@thegavinli.com>,
Laurentiu Tudor <laurentiu.tudor@nxp.com>,
Minas Harutyunyan <hminas@synopsys.com>,
Alan Stern <stern@rowland.harvard.edu>,
Geoff Levand <geoff@infradead.org>,
Michal Simek <michal.simek@xilinx.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
Mathias Nyman <mathias.nyman@intel.com>, Bin Liu <b-liu@ti.com>,
linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org, linux-m68k@lists.linux-m68k.org,
iommu@lists.linux-foundation.org, linux-arch@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 6/6] driver core: initialize a default DMA mask for platform device
Date: Fri, 16 Aug 2019 08:24:35 +0200 [thread overview]
Message-ID: <20190816062435.881-7-hch@lst.de> (raw)
In-Reply-To: <20190816062435.881-1-hch@lst.de>
We still treat devices without a DMA mask as defaulting to 32-bits for
both mask, but a few releases ago we've started warning about such
cases, as they require special cases to work around this sloppyness.
Add a dma_mask field to struct platform_device so that we can initialize
the dma_mask pointer in struct device and initialize both masks to
32-bits by default, replacing similar functionality in m68k and
powerpc. The arch_setup_pdev_archdata hooks is now unused and removed.
Note that the code looks a little odd with the various conditionals
because we have to support platform_device structures that are
statically allocated.
Signed-off-by: Christoph Hellwig <hch@lst.de>
---
arch/m68k/kernel/dma.c | 9 -------
arch/powerpc/kernel/setup-common.c | 6 -----
arch/sh/boards/mach-ap325rxa/setup.c | 1 -
arch/sh/boards/mach-ecovec24/setup.c | 2 --
arch/sh/boards/mach-kfr2r09/setup.c | 1 -
arch/sh/boards/mach-migor/setup.c | 1 -
arch/sh/boards/mach-se/7724/setup.c | 2 --
drivers/base/platform.c | 37 ++++++++++++----------------
include/linux/platform_device.h | 2 +-
9 files changed, 17 insertions(+), 44 deletions(-)
diff --git a/arch/m68k/kernel/dma.c b/arch/m68k/kernel/dma.c
index 30cd59caf037..447849d1d645 100644
--- a/arch/m68k/kernel/dma.c
+++ b/arch/m68k/kernel/dma.c
@@ -79,12 +79,3 @@ void arch_sync_dma_for_device(struct device *dev, phys_addr_t handle,
break;
}
}
-
-void arch_setup_pdev_archdata(struct platform_device *pdev)
-{
- if (pdev->dev.coherent_dma_mask == DMA_MASK_NONE &&
- pdev->dev.dma_mask == NULL) {
- pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
- pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
- }
-}
diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c
index 1f8db666468d..5e6543aba1b3 100644
--- a/arch/powerpc/kernel/setup-common.c
+++ b/arch/powerpc/kernel/setup-common.c
@@ -778,12 +778,6 @@ void ppc_printk_progress(char *s, unsigned short hex)
pr_info("%s\n", s);
}
-void arch_setup_pdev_archdata(struct platform_device *pdev)
-{
- pdev->archdata.dma_mask = DMA_BIT_MASK(32);
- pdev->dev.dma_mask = &pdev->archdata.dma_mask;
-}
-
static __init void print_system_info(void)
{
pr_info("-----------------------------------------------------\n");
diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c
index 8301a4378f50..665cad452798 100644
--- a/arch/sh/boards/mach-ap325rxa/setup.c
+++ b/arch/sh/boards/mach-ap325rxa/setup.c
@@ -527,7 +527,6 @@ static int __init ap325rxa_devices_setup(void)
/* Initialize CEU platform device separately to map memory first */
device_initialize(&ap325rxa_ceu_device.dev);
- arch_setup_pdev_archdata(&ap325rxa_ceu_device);
dma_declare_coherent_memory(&ap325rxa_ceu_device.dev,
ceu_dma_membase, ceu_dma_membase,
ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1);
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index f402aa741bf3..acaa97459531 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -1440,7 +1440,6 @@ static int __init arch_setup(void)
/* Initialize CEU platform devices separately to map memory first */
device_initialize(&ecovec_ceu_devices[0]->dev);
- arch_setup_pdev_archdata(ecovec_ceu_devices[0]);
dma_declare_coherent_memory(&ecovec_ceu_devices[0]->dev,
ceu0_dma_membase, ceu0_dma_membase,
ceu0_dma_membase +
@@ -1448,7 +1447,6 @@ static int __init arch_setup(void)
platform_device_add(ecovec_ceu_devices[0]);
device_initialize(&ecovec_ceu_devices[1]->dev);
- arch_setup_pdev_archdata(ecovec_ceu_devices[1]);
dma_declare_coherent_memory(&ecovec_ceu_devices[1]->dev,
ceu1_dma_membase, ceu1_dma_membase,
ceu1_dma_membase +
diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c
index 1cf9a47ac90e..96538ba3aa32 100644
--- a/arch/sh/boards/mach-kfr2r09/setup.c
+++ b/arch/sh/boards/mach-kfr2r09/setup.c
@@ -601,7 +601,6 @@ static int __init kfr2r09_devices_setup(void)
/* Initialize CEU platform device separately to map memory first */
device_initialize(&kfr2r09_ceu_device.dev);
- arch_setup_pdev_archdata(&kfr2r09_ceu_device);
dma_declare_coherent_memory(&kfr2r09_ceu_device.dev,
ceu_dma_membase, ceu_dma_membase,
ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1);
diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c
index 90702740f207..9ed369dad62d 100644
--- a/arch/sh/boards/mach-migor/setup.c
+++ b/arch/sh/boards/mach-migor/setup.c
@@ -602,7 +602,6 @@ static int __init migor_devices_setup(void)
/* Initialize CEU platform device separately to map memory first */
device_initialize(&migor_ceu_device.dev);
- arch_setup_pdev_archdata(&migor_ceu_device);
dma_declare_coherent_memory(&migor_ceu_device.dev,
ceu_dma_membase, ceu_dma_membase,
ceu_dma_membase + CEU_BUFFER_MEMORY_SIZE - 1);
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c
index 3674064816c7..32f5dd944889 100644
--- a/arch/sh/boards/mach-se/7724/setup.c
+++ b/arch/sh/boards/mach-se/7724/setup.c
@@ -937,7 +937,6 @@ static int __init devices_setup(void)
/* Initialize CEU platform devices separately to map memory first */
device_initialize(&ms7724se_ceu_devices[0]->dev);
- arch_setup_pdev_archdata(ms7724se_ceu_devices[0]);
dma_declare_coherent_memory(&ms7724se_ceu_devices[0]->dev,
ceu0_dma_membase, ceu0_dma_membase,
ceu0_dma_membase +
@@ -945,7 +944,6 @@ static int __init devices_setup(void)
platform_device_add(ms7724se_ceu_devices[0]);
device_initialize(&ms7724se_ceu_devices[1]->dev);
- arch_setup_pdev_archdata(ms7724se_ceu_devices[1]);
dma_declare_coherent_memory(&ms7724se_ceu_devices[1]->dev,
ceu1_dma_membase, ceu1_dma_membase,
ceu1_dma_membase +
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index ec974ba9c0c4..600913aea73b 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -39,25 +39,6 @@ struct device platform_bus = {
};
EXPORT_SYMBOL_GPL(platform_bus);
-/**
- * arch_setup_pdev_archdata - Allow manipulation of archdata before its used
- * @pdev: platform device
- *
- * This is called before platform_device_add() such that any pdev_archdata may
- * be setup before the platform_notifier is called. So if a user needs to
- * manipulate any relevant information in the pdev_archdata they can do:
- *
- * platform_device_alloc()
- * ... manipulate ...
- * platform_device_add()
- *
- * And if they don't care they can just call platform_device_register() and
- * everything will just work out.
- */
-void __weak arch_setup_pdev_archdata(struct platform_device *pdev)
-{
-}
-
/**
* platform_get_resource - get a resource for a device
* @dev: platform device
@@ -264,6 +245,20 @@ struct platform_object {
char name[];
};
+/*
+ * Set up default DMA mask for platform devices if the they weren't
+ * previously set by the architecture / DT.
+ */
+static void setup_pdev_dma_masks(struct platform_device *pdev)
+{
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ if (!pdev->dma_mask)
+ pdev->dma_mask = DMA_BIT_MASK(32);
+ if (!pdev->dev.dma_mask)
+ pdev->dev.dma_mask = &pdev->dma_mask;
+};
+
/**
* platform_device_put - destroy a platform device
* @pdev: platform device to free
@@ -310,7 +305,7 @@ struct platform_device *platform_device_alloc(const char *name, int id)
pa->pdev.id = id;
device_initialize(&pa->pdev.dev);
pa->pdev.dev.release = platform_device_release;
- arch_setup_pdev_archdata(&pa->pdev);
+ setup_pdev_dma_masks(&pa->pdev);
}
return pa ? &pa->pdev : NULL;
@@ -512,7 +507,7 @@ EXPORT_SYMBOL_GPL(platform_device_del);
int platform_device_register(struct platform_device *pdev)
{
device_initialize(&pdev->dev);
- arch_setup_pdev_archdata(pdev);
+ setup_pdev_dma_masks(pdev);
return platform_device_add(pdev);
}
EXPORT_SYMBOL_GPL(platform_device_register);
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 9bc36b589827..34a3d8ed8ba7 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -24,6 +24,7 @@ struct platform_device {
int id;
bool id_auto;
struct device dev;
+ u64 dma_mask;
u32 num_resources;
struct resource *resource;
@@ -48,7 +49,6 @@ extern void platform_device_unregister(struct platform_device *);
extern struct bus_type platform_bus_type;
extern struct device platform_bus;
-extern void arch_setup_pdev_archdata(struct platform_device *);
extern struct resource *platform_get_resource(struct platform_device *,
unsigned int, unsigned int);
extern void __iomem *
--
2.20.1
next prev parent reply other threads:[~2019-08-16 6:29 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-16 6:24 next take at setting up a dma mask by default for platform devices v2 Christoph Hellwig
2019-08-16 6:24 ` [PATCH 1/6] usb: don't create dma pools for HCDs with a localmem_pool Christoph Hellwig
2019-08-16 6:24 ` [PATCH 2/6] usb: add a hcd_uses_dma helper Christoph Hellwig
2019-08-16 6:24 ` [PATCH 3/6] usb: add a HCD_DMA flag instead of guestimating DMA capabilities Christoph Hellwig
2019-08-16 6:24 ` [PATCH 4/6] usb/max3421: remove the dummy {un,}map_urb_for_dma methods Christoph Hellwig
2019-08-16 6:24 ` [PATCH 5/6] dma-mapping: remove is_device_dma_capable Christoph Hellwig
2019-08-16 6:24 ` Christoph Hellwig [this message]
2019-08-16 7:39 ` [PATCH 6/6] driver core: initialize a default DMA mask for platform device Geert Uytterhoeven
2019-08-22 17:11 ` next take at setting up a dma mask by default for platform devices v2 Greg Kroah-Hartman
-- strict thread matches above, loose matches on Subject: below --
2019-08-11 8:05 next take at setting up a dma mask by default for platform devices Christoph Hellwig
2019-08-11 8:05 ` [PATCH 6/6] driver core: initialize a default DMA mask for platform device Christoph Hellwig
2019-08-14 15:49 ` Robin Murphy
2019-08-15 13:32 ` Christoph Hellwig
2019-08-15 13:03 ` Greg Kroah-Hartman
2019-08-15 13:38 ` Christoph Hellwig
2019-08-15 14:05 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190816062435.881-7-hch@lst.de \
--to=hch@lst.de \
--cc=b-liu@ti.com \
--cc=festevam@gmail.com \
--cc=geoff@infradead.org \
--cc=git@thegavinli.com \
--cc=gregkh@linuxfoundation.org \
--cc=hminas@synopsys.com \
--cc=iommu@lists.linux-foundation.org \
--cc=kernel@pengutronix.de \
--cc=laurentiu.tudor@nxp.com \
--cc=linux-arch@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-m68k@lists.linux-m68k.org \
--cc=linux-usb@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mathias.nyman@intel.com \
--cc=maxime.chevallier@bootlin.com \
--cc=michal.simek@xilinx.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).