* [PATCH v2 0/3] usb: host: xhci-{plat,rcar}: clean up the drivers
@ 2019-09-02 12:01 Yoshihiro Shimoda
2019-09-02 12:01 ` [PATCH v2 1/3] usb: host: xhci-plat: add quirks member into struct xhci_plat_priv Yoshihiro Shimoda
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Yoshihiro Shimoda @ 2019-09-02 12:01 UTC (permalink / raw)
To: gregkh, mathias.nyman; +Cc: linux-usb, linux-renesas-soc, Yoshihiro Shimoda
This patch series is based on the latest Greg's linux-usb.git /
usb-next branch.
Changes from v1:
- Rebase today's usb-next branch.
- Remove 4/4 patch (because I need more time to investigate how to fix it).
- Add Geert-san's Reviewed-by from patch 1/3 to 3/3.
https://patchwork.kernel.org/project/linux-renesas-soc/list/?series=165847
Yoshihiro Shimoda (3):
usb: host: xhci-plat: add quirks member into struct xhci_plat_priv
usb: host: xhci-rcar: Add a helper macro to set xhci_plat_priv
usb: host: xhci-rcar: Use xhci_plat_priv.quirks instead of code
settings
drivers/usb/host/xhci-plat.c | 14 +++++---------
drivers/usb/host/xhci-plat.h | 2 ++
drivers/usb/host/xhci-rcar.c | 28 ----------------------------
drivers/usb/host/xhci-rcar.h | 21 +++++++++++++++++++++
4 files changed, 28 insertions(+), 37 deletions(-)
--
2.7.4
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v2 1/3] usb: host: xhci-plat: add quirks member into struct xhci_plat_priv
2019-09-02 12:01 [PATCH v2 0/3] usb: host: xhci-{plat,rcar}: clean up the drivers Yoshihiro Shimoda
@ 2019-09-02 12:01 ` Yoshihiro Shimoda
2019-09-03 13:52 ` Greg KH
2019-09-02 12:01 ` [PATCH v2 2/3] usb: host: xhci-rcar: Add a helper macro to set xhci_plat_priv Yoshihiro Shimoda
2019-09-02 12:01 ` [PATCH v2 3/3] usb: host: xhci-rcar: Use xhci_plat_priv.quirks instead of code settings Yoshihiro Shimoda
2 siblings, 1 reply; 5+ messages in thread
From: Yoshihiro Shimoda @ 2019-09-02 12:01 UTC (permalink / raw)
To: gregkh, mathias.nyman; +Cc: linux-usb, linux-renesas-soc, Yoshihiro Shimoda
To simplify adding xhci->quirks instead of the .init_quirk()
function, this patch adds a new parameter "quirks" into
the struct xhci_plat_priv.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
drivers/usb/host/xhci-plat.c | 4 +++-
drivers/usb/host/xhci-plat.h | 2 ++
2 files changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index a1e5ce4..1843b69 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -66,12 +66,14 @@ static int xhci_priv_resume_quirk(struct usb_hcd *hcd)
static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
{
+ struct xhci_plat_priv *priv = xhci_to_priv(xhci);
+
/*
* As of now platform drivers don't provide MSI support so we ensure
* here that the generic code does not try to make a pci_dev from our
* dev struct in order to setup MSI
*/
- xhci->quirks |= XHCI_PLAT;
+ xhci->quirks |= XHCI_PLAT | priv->quirks;
}
/* called during probe() after chip reset completes */
diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h
index ae29f22..5681723 100644
--- a/drivers/usb/host/xhci-plat.h
+++ b/drivers/usb/host/xhci-plat.h
@@ -12,10 +12,12 @@
struct xhci_plat_priv {
const char *firmware_name;
+ unsigned long long quirks;
void (*plat_start)(struct usb_hcd *);
int (*init_quirk)(struct usb_hcd *);
int (*resume_quirk)(struct usb_hcd *);
};
#define hcd_to_xhci_priv(h) ((struct xhci_plat_priv *)hcd_to_xhci(h)->priv)
+#define xhci_to_priv(x) ((struct xhci_plat_priv *)(x)->priv)
#endif /* _XHCI_PLAT_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 2/3] usb: host: xhci-rcar: Add a helper macro to set xhci_plat_priv
2019-09-02 12:01 [PATCH v2 0/3] usb: host: xhci-{plat,rcar}: clean up the drivers Yoshihiro Shimoda
2019-09-02 12:01 ` [PATCH v2 1/3] usb: host: xhci-plat: add quirks member into struct xhci_plat_priv Yoshihiro Shimoda
@ 2019-09-02 12:01 ` Yoshihiro Shimoda
2019-09-02 12:01 ` [PATCH v2 3/3] usb: host: xhci-rcar: Use xhci_plat_priv.quirks instead of code settings Yoshihiro Shimoda
2 siblings, 0 replies; 5+ messages in thread
From: Yoshihiro Shimoda @ 2019-09-02 12:01 UTC (permalink / raw)
To: gregkh, mathias.nyman; +Cc: linux-usb, linux-renesas-soc, Yoshihiro Shimoda
To avoid copy-and-paste setting of xhci_plat_priv for R-Car SoCs,
this patch add a helper macro SET_XHCI_PLAT_PRIV_FOR_RCAR.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
drivers/usb/host/xhci-plat.c | 10 ++--------
drivers/usb/host/xhci-rcar.h | 7 +++++++
2 files changed, 9 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 1843b69..d90cd5e 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -105,17 +105,11 @@ static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = {
};
static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = {
- .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1,
- .init_quirk = xhci_rcar_init_quirk,
- .plat_start = xhci_rcar_start,
- .resume_quirk = xhci_rcar_resume_quirk,
+ SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V1)
};
static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen3 = {
- .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V3,
- .init_quirk = xhci_rcar_init_quirk,
- .plat_start = xhci_rcar_start,
- .resume_quirk = xhci_rcar_resume_quirk,
+ SET_XHCI_PLAT_PRIV_FOR_RCAR(XHCI_RCAR_FIRMWARE_NAME_V3)
};
static const struct of_device_id usb_xhci_of_match[] = {
diff --git a/drivers/usb/host/xhci-rcar.h b/drivers/usb/host/xhci-rcar.h
index 804b6ab..1f8c225 100644
--- a/drivers/usb/host/xhci-rcar.h
+++ b/drivers/usb/host/xhci-rcar.h
@@ -31,4 +31,11 @@ static inline int xhci_rcar_resume_quirk(struct usb_hcd *hcd)
return 0;
}
#endif
+
+#define SET_XHCI_PLAT_PRIV_FOR_RCAR(firmware) \
+ .firmware_name = firmware, \
+ .init_quirk = xhci_rcar_init_quirk, \
+ .plat_start = xhci_rcar_start, \
+ .resume_quirk = xhci_rcar_resume_quirk,
+
#endif /* _XHCI_RCAR_H */
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 3/3] usb: host: xhci-rcar: Use xhci_plat_priv.quirks instead of code settings
2019-09-02 12:01 [PATCH v2 0/3] usb: host: xhci-{plat,rcar}: clean up the drivers Yoshihiro Shimoda
2019-09-02 12:01 ` [PATCH v2 1/3] usb: host: xhci-plat: add quirks member into struct xhci_plat_priv Yoshihiro Shimoda
2019-09-02 12:01 ` [PATCH v2 2/3] usb: host: xhci-rcar: Add a helper macro to set xhci_plat_priv Yoshihiro Shimoda
@ 2019-09-02 12:01 ` Yoshihiro Shimoda
2 siblings, 0 replies; 5+ messages in thread
From: Yoshihiro Shimoda @ 2019-09-02 12:01 UTC (permalink / raw)
To: gregkh, mathias.nyman; +Cc: linux-usb, linux-renesas-soc, Yoshihiro Shimoda
This patch uses xhci_plat_priv.quirks to simplify. The previous
code had conditions to set some quirks in xhci_rcar_init_quirk().
But, the xhci_rcar_init_quirk() is called at the same conditions.
So, no behavior change.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
drivers/usb/host/xhci-rcar.c | 28 ----------------------------
drivers/usb/host/xhci-rcar.h | 14 ++++++++++++++
2 files changed, 14 insertions(+), 28 deletions(-)
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c
index 8616c52..34761be 100644
--- a/drivers/usb/host/xhci-rcar.c
+++ b/drivers/usb/host/xhci-rcar.c
@@ -107,15 +107,6 @@ static int xhci_rcar_is_gen2(struct device *dev)
of_device_is_compatible(node, "renensas,rcar-gen2-xhci");
}
-static int xhci_rcar_is_gen3(struct device *dev)
-{
- struct device_node *node = dev->of_node;
-
- return of_device_is_compatible(node, "renesas,xhci-r8a7795") ||
- of_device_is_compatible(node, "renesas,xhci-r8a7796") ||
- of_device_is_compatible(node, "renesas,rcar-gen3-xhci");
-}
-
void xhci_rcar_start(struct usb_hcd *hcd)
{
u32 temp;
@@ -226,32 +217,13 @@ static bool xhci_rcar_wait_for_pll_active(struct usb_hcd *hcd)
/* This function needs to initialize a "phy" of usb before */
int xhci_rcar_init_quirk(struct usb_hcd *hcd)
{
- struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-
/* If hcd->regs is NULL, we don't just call the following function */
if (!hcd->regs)
return 0;
- /*
- * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set
- * to 1. However, these SoCs don't support 64-bit address memory
- * pointers. So, this driver clears the AC64 bit of xhci->hcc_params
- * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
- * xhci_gen_setup().
- *
- * And, since the firmware/internal CPU control the USBSTS.STS_HALT
- * and the process speed is down when the roothub port enters U3,
- * long delay for the handshake of STS_HALT is neeed in xhci_suspend().
- */
- if (xhci_rcar_is_gen2(hcd->self.controller) ||
- xhci_rcar_is_gen3(hcd->self.controller)) {
- xhci->quirks |= XHCI_NO_64BIT_SUPPORT | XHCI_SLOW_SUSPEND;
- }
-
if (!xhci_rcar_wait_for_pll_active(hcd))
return -ETIMEDOUT;
- xhci->quirks |= XHCI_TRUST_TX_LENGTH;
return xhci_rcar_download_firmware(hcd);
}
diff --git a/drivers/usb/host/xhci-rcar.h b/drivers/usb/host/xhci-rcar.h
index 1f8c225..012744a 100644
--- a/drivers/usb/host/xhci-rcar.h
+++ b/drivers/usb/host/xhci-rcar.h
@@ -32,8 +32,22 @@ static inline int xhci_rcar_resume_quirk(struct usb_hcd *hcd)
}
#endif
+/*
+ * On R-Car Gen2 and Gen3, the AC64 bit (bit 0) of HCCPARAMS1 is set
+ * to 1. However, these SoCs don't support 64-bit address memory
+ * pointers. So, this driver clears the AC64 bit of xhci->hcc_params
+ * to call dma_set_coherent_mask(dev, DMA_BIT_MASK(32)) in
+ * xhci_gen_setup() by using the XHCI_NO_64BIT_SUPPORT quirk.
+ *
+ * And, since the firmware/internal CPU control the USBSTS.STS_HALT
+ * and the process speed is down when the roothub port enters U3,
+ * long delay for the handshake of STS_HALT is neeed in xhci_suspend()
+ * by using the XHCI_SLOW_SUSPEND quirk.
+ */
#define SET_XHCI_PLAT_PRIV_FOR_RCAR(firmware) \
.firmware_name = firmware, \
+ .quirks = XHCI_NO_64BIT_SUPPORT | XHCI_TRUST_TX_LENGTH | \
+ XHCI_SLOW_SUSPEND, \
.init_quirk = xhci_rcar_init_quirk, \
.plat_start = xhci_rcar_start, \
.resume_quirk = xhci_rcar_resume_quirk,
--
2.7.4
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2 1/3] usb: host: xhci-plat: add quirks member into struct xhci_plat_priv
2019-09-02 12:01 ` [PATCH v2 1/3] usb: host: xhci-plat: add quirks member into struct xhci_plat_priv Yoshihiro Shimoda
@ 2019-09-03 13:52 ` Greg KH
0 siblings, 0 replies; 5+ messages in thread
From: Greg KH @ 2019-09-03 13:52 UTC (permalink / raw)
To: Yoshihiro Shimoda; +Cc: mathias.nyman, linux-usb, linux-renesas-soc
On Mon, Sep 02, 2019 at 09:01:36PM +0900, Yoshihiro Shimoda wrote:
> To simplify adding xhci->quirks instead of the .init_quirk()
> function, this patch adds a new parameter "quirks" into
> the struct xhci_plat_priv.
>
> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
> ---
> drivers/usb/host/xhci-plat.c | 4 +++-
> drivers/usb/host/xhci-plat.h | 2 ++
> 2 files changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
> index a1e5ce4..1843b69 100644
> --- a/drivers/usb/host/xhci-plat.c
> +++ b/drivers/usb/host/xhci-plat.c
> @@ -66,12 +66,14 @@ static int xhci_priv_resume_quirk(struct usb_hcd *hcd)
>
> static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci)
> {
> + struct xhci_plat_priv *priv = xhci_to_priv(xhci);
> +
> /*
> * As of now platform drivers don't provide MSI support so we ensure
> * here that the generic code does not try to make a pci_dev from our
> * dev struct in order to setup MSI
> */
> - xhci->quirks |= XHCI_PLAT;
> + xhci->quirks |= XHCI_PLAT | priv->quirks;
> }
>
> /* called during probe() after chip reset completes */
> diff --git a/drivers/usb/host/xhci-plat.h b/drivers/usb/host/xhci-plat.h
> index ae29f22..5681723 100644
> --- a/drivers/usb/host/xhci-plat.h
> +++ b/drivers/usb/host/xhci-plat.h
> @@ -12,10 +12,12 @@
>
> struct xhci_plat_priv {
> const char *firmware_name;
> + unsigned long long quirks;
So you mean u64? Or something else?
Please be specific here so we know the size of this field.
Ugh, looks like xhci.c uses unsigned long long too, ok, nevermind :(
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2019-09-03 13:52 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-09-02 12:01 [PATCH v2 0/3] usb: host: xhci-{plat,rcar}: clean up the drivers Yoshihiro Shimoda
2019-09-02 12:01 ` [PATCH v2 1/3] usb: host: xhci-plat: add quirks member into struct xhci_plat_priv Yoshihiro Shimoda
2019-09-03 13:52 ` Greg KH
2019-09-02 12:01 ` [PATCH v2 2/3] usb: host: xhci-rcar: Add a helper macro to set xhci_plat_priv Yoshihiro Shimoda
2019-09-02 12:01 ` [PATCH v2 3/3] usb: host: xhci-rcar: Use xhci_plat_priv.quirks instead of code settings Yoshihiro Shimoda
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).