Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] dt-bindings: usb: Fix references to usb-hcd.yaml
@ 2019-10-03 19:31 Jonathan Neuschäfer
  0 siblings, 0 replies; only message in thread
From: Jonathan Neuschäfer @ 2019-10-03 19:31 UTC (permalink / raw)
  To: devicetree
  Cc: Jonathan Neuschäfer, Greg Kroah-Hartman, Rob Herring,
	Mark Rutland, Matthias Brugger, linux-usb, linux-arm-kernel,
	linux-mediatek, linux-kernel

usb-hcd.txt has been converted to YAML. Update references accordingly.

Fixes: 14ec072a19ad ("dt-bindings: usb: Convert USB HCD generic binding to YAML")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
---
 Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt | 4 ++--
 Documentation/devicetree/bindings/usb/mediatek,mtu3.txt     | 4 ++--
 Documentation/devicetree/bindings/usb/usb-uhci.txt          | 2 +-
 Documentation/devicetree/bindings/usb/usb-xhci.txt          | 4 ++--
 4 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
index f3e4acecabe8..42d8814f903a 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
@@ -33,7 +33,7 @@ Required properties:
 	"dma_ck": dma_bus clock for data transfer by DMA,
 	"xhci_ck": controller clock

- - phys : see usb-hcd.txt in the current directory
+ - phys : see usb-hcd.yaml in the current directory

 Optional properties:
  - wakeup-source : enable USB remote wakeup;
@@ -53,7 +53,7 @@ Optional properties:
 	See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
  - imod-interval-ns: default interrupt moderation interval is 5000ns

-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
 supported.

 Example:
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
index b9af7f5ee91d..e0ae6096f7ac 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
@@ -17,7 +17,7 @@ Required properties:
  - clock-names : must contain "sys_ck" for clock of controller,
 	the following clocks are optional:
 	"ref_ck", "mcu_ck" and "dma_ck";
- - phys : see usb-hcd.txt in the current directory
+ - phys : see usb-hcd.yaml in the current directory
  - dr_mode : should be one of "host", "peripheral" or "otg",
 	refer to usb/generic.txt

@@ -60,7 +60,7 @@ Optional properties:
  - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
 	bit1 for u3port1, ... etc;

-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
 supported.

 Sub-nodes:
diff --git a/Documentation/devicetree/bindings/usb/usb-uhci.txt b/Documentation/devicetree/bindings/usb/usb-uhci.txt
index cc2e6f7d602e..d1702eb2c8bd 100644
--- a/Documentation/devicetree/bindings/usb/usb-uhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-uhci.txt
@@ -6,7 +6,7 @@ Required properties:
 - reg : Should contain 1 register ranges(address and length)
 - interrupts : UHCI controller interrupt

-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
 supported.

 Example:
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index 97400e8f8605..b49b819571f9 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -41,9 +41,9 @@ Optional properties:
   - usb3-lpm-capable: determines if platform is USB3 LPM capable
   - quirk-broken-port-ped: set if the controller has broken port disable mechanism
   - imod-interval-ns: default interrupt moderation interval is 5000ns
-  - phys : see usb-hcd.txt in the current directory
+  - phys : see usb-hcd.yaml in the current directory

-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
 supported.


--
2.20.1


^ permalink raw reply	[flat|nested] only message in thread

only message in thread, back to index

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-03 19:31 [PATCH] dt-bindings: usb: Fix references to usb-hcd.yaml Jonathan Neuschäfer

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git