linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: JC Kuo <jckuo@nvidia.com>
To: <gregkh@linuxfoundation.org>, <thierry.reding@gmail.com>,
	<jonathanh@nvidia.com>
Cc: <linux-tegra@vger.kernel.org>, <linux-usb@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<nkristam@nvidia.com>, <skomatineni@nvidia.com>,
	JC Kuo <jckuo@nvidia.com>
Subject: [PATCH v3 0/7] add Tegra194 XUSB host and pad controller support
Date: Sat, 5 Oct 2019 00:28:59 +0800	[thread overview]
Message-ID: <20191004162906.4818-1-jckuo@nvidia.com> (raw)

Hi,

This series introduces support for Tegra194 XUSB host and pad
controller. Tegra194 XUSB host and pad controller are highly
similar to the controllers found on Tegra186. Therefore, it's
possible to resue xhci-tegra.c and xusb-tegra186.c for Tegra194.

Changelog:
v3:
  add change log to cover latter

v2:
  xhci: tegra: Parameterize mailbox register addresses
   - no change

  usb: host: xhci-tegra: Add Tegra194 XHCI support
   - no change

  phy: tegra: xusb: Protect Tegra186 soc with config
   - new patch to protect Tegra186 soc data with config

  phy: tegra: xusb: Add Tegra194 support
   - removed unnecessary #if/#endif pairs
   - introduce new soc->supports_gen2 flag which indicate whether or not
     a soc supports USB 3.1 Gen 2 speed

  dt-bindings: phy: tegra: Add Tegra194 support
   - fix a typo

  arm64: tegra: Add XUSB and pad controller on Tegra194
   - renamed xhci@3610000 with usb@3610000
   - moved padctl@3520000 and usb@3610000 inside /cbb
   - cleaned up "clocks" property of usb@3610000 node
   - added blanks lines to visually separate blocks

  arm64: tegra: Enable XUSB host in P2972-0000 board
   - use capitalization of regulator names
   - fix gpio property of VDD_5V_SATA regulator

JC Kuo (7):
  xhci: tegra: Parameterize mailbox register addresses
  usb: host: xhci-tegra: Add Tegra194 XHCI support
  phy: tegra: xusb: Protect Tegra186 soc with config
  phy: tegra: xusb: Add Tegra194 support
  dt-bindings: phy: tegra: Add Tegra194 support
  arm64: tegra: Add XUSB and pad controller on Tegra194
  arm64: tegra: Enable XUSB host in P2972-0000 board

 .../phy/nvidia,tegra124-xusb-padctl.txt       |  16 ++
 .../arm64/boot/dts/nvidia/tegra194-p2888.dtsi |  36 ++++-
 .../boot/dts/nvidia/tegra194-p2972-0000.dts   |  62 ++++++++
 arch/arm64/boot/dts/nvidia/tegra194.dtsi      | 139 +++++++++++++++++
 drivers/phy/tegra/Makefile                    |   1 +
 drivers/phy/tegra/xusb-tegra186.c             | 144 +++++++++++++-----
 drivers/phy/tegra/xusb.c                      |   7 +
 drivers/phy/tegra/xusb.h                      |   6 +
 drivers/usb/host/xhci-tegra.c                 |  88 +++++++++--
 9 files changed, 448 insertions(+), 51 deletions(-)

-- 
2.17.1


             reply	other threads:[~2019-10-04 16:30 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-04 16:28 JC Kuo [this message]
2019-10-04 16:29 ` [PATCH v3 1/7] xhci: tegra: Parameterize mailbox register addresses JC Kuo
2019-10-04 16:29 ` [PATCH v3 2/7] usb: host: xhci-tegra: Add Tegra194 XHCI support JC Kuo
2019-10-04 16:29 ` [PATCH v3 3/7] phy: tegra: xusb: Protect Tegra186 soc with config JC Kuo
2019-10-04 16:29 ` [PATCH v3 4/7] phy: tegra: xusb: Add Tegra194 support JC Kuo
2019-10-04 16:29 ` [PATCH v3 5/7] dt-bindings: phy: tegra: " JC Kuo
2019-10-04 16:29 ` [PATCH v3 6/7] arm64: tegra: Add XUSB and pad controller on Tegra194 JC Kuo
2019-10-04 16:29 ` [PATCH v3 7/7] arm64: tegra: Enable XUSB host in P2972-0000 board JC Kuo
2019-10-07 11:03 ` [PATCH v3 0/7] add Tegra194 XUSB host and pad controller support Greg KH
2019-10-08 11:29   ` Thierry Reding
2019-10-09  2:23     ` JC Kuo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191004162906.4818-1-jckuo@nvidia.com \
    --to=jckuo@nvidia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jonathanh@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nkristam@nvidia.com \
    --cc=skomatineni@nvidia.com \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).