Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
* [RFC][PATCH v2 0/5] dwc3: Changes for HiKey960 support
@ 2019-10-07 17:55 John Stultz
  2019-10-07 17:55 ` [RFC][PATCH v2 1/5] dt-bindings: usb: dwc3: Add a property to do a CGTL soft reset on mode switching John Stultz
                   ` (4 more replies)
  0 siblings, 5 replies; 15+ messages in thread
From: John Stultz @ 2019-10-07 17:55 UTC (permalink / raw)
  To: lkml
  Cc: John Stultz, Greg Kroah-Hartman, Felipe Balbi, Andy Shevchenko,
	Rob Herring, Mark Rutland, Yu Chen, Matthias Brugger,
	Chunfeng Yun, linux-usb, devicetree

I've been carrying for awhile some patches that Yu Chen was
previously pushing upstream to enable USB on the HiKey960 board
and I wanted to try to nudge them forward as I'm not sure as to
what his plans are.

This series is just the simpler parts of the patch set that I
wanted to send out to see if we could make some progress on
while I continue to work on the more complex bits.

You can find the full set of changes to get USB working on the
board here:
  https://git.linaro.org/people/john.stultz/android-dev.git/log/?id=ef858be80f202b7bffb7d03c168ee72457a0ef3e

This series is just the more trivial changes, along with some
missing binding documentation that I've added.

I'd greatly appreciate any review or feedback on this series!

thanks
-john

New in v2:
* Tweaked binding clock name as clk_usb3phy_ref didn't seem right.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yu Chen <chenyu56@huawei.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org

John Stultz (2):
  dt-bindings: usb: dwc3: Add a property to do a CGTL soft reset on mode
    switching
  dt-bindings: usb: dwc3: of-simple: add compatible for HiSi

Yu Chen (3):
  usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe for
    Hisilicon Kirin Soc
  usb: dwc3: Increase timeout for CmdAct cleared by device controller
  usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc
    Platform

 .../devicetree/bindings/usb/dwc3.txt          |  2 +
 .../devicetree/bindings/usb/hisi,dwc3.txt     | 52 +++++++++++++++++++
 drivers/usb/dwc3/core.c                       | 20 +++++++
 drivers/usb/dwc3/core.h                       |  3 ++
 drivers/usb/dwc3/dwc3-of-simple.c             |  4 +-
 drivers/usb/dwc3/gadget.c                     |  2 +-
 6 files changed, 81 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/usb/hisi,dwc3.txt

-- 
2.17.1


^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, back to index

Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-07 17:55 [RFC][PATCH v2 0/5] dwc3: Changes for HiKey960 support John Stultz
2019-10-07 17:55 ` [RFC][PATCH v2 1/5] dt-bindings: usb: dwc3: Add a property to do a CGTL soft reset on mode switching John Stultz
2019-10-07 17:55 ` [RFC][PATCH v2 2/5] usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe for Hisilicon Kirin Soc John Stultz
2019-10-07 23:39   ` Jack Pham
2019-10-07 23:53     ` John Stultz
2019-10-07 17:55 ` [RFC][PATCH v2 3/5] usb: dwc3: Increase timeout for CmdAct cleared by device controller John Stultz
2019-10-07 17:55 ` [RFC][PATCH v2 4/5] dt-bindings: usb: dwc3: of-simple: add compatible for HiSi John Stultz
2019-10-07 18:38   ` Rob Herring
2019-10-07 19:06     ` John Stultz
2019-10-07 21:11       ` Rob Herring
2019-10-07 23:00         ` John Stultz
2019-10-11 15:51           ` Rob Herring
2019-10-15  3:57             ` John Stultz
2019-10-15 11:40               ` Rob Herring
2019-10-07 17:55 ` [RFC][PATCH v2 5/5] usb: dwc3: dwc3-of-simple: Add support for dwc3 of Hisilicon Soc Platform John Stultz

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git