Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Peter Chen <peter.chen@nxp.com>
To: Igor Opaniuk <igor.opaniuk@gmail.com>
Cc: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
	Marcel Ziswiler <marcel.ziswiler@toradex.com>,
	Philippe Schenker <philippe.schenker@toradex.com>,
	Stefan Agner <stefan.agner@toradex.com>,
	Max Krummenacher <max.krummenacher@toradex.com>,
	Oleksandr Suvorov <oleksandr.suvorov@toradex.com>,
	Igor Opaniuk <igor.opaniuk@toradex.com>, Jun Li <jun.li@nxp.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>
Subject: Re: [RFC PATCH v1 2/3] usb: chipidea: set mode for usb phy driver
Date: Tue, 8 Oct 2019 03:23:42 +0000
Message-ID: <20191008032326.GB5670@b29397-desktop> (raw)
In-Reply-To: <20191007124607.20618-2-igor.opaniuk@gmail.com>

On 19-10-07 15:46:06, Igor Opaniuk wrote:
> From: Igor Opaniuk <igor.opaniuk@toradex.com>
> 
> After enters one specific role, notify usb phy driver.
> 
> Signed-off-by: Li Jun <jun.li@nxp.com>
> Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
> ---
> 
>  drivers/usb/chipidea/ci.h | 21 ++++++++++++++++++---
>  1 file changed, 18 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h
> index 6911aef500e9..a11d23910b12 100644
> --- a/drivers/usb/chipidea/ci.h
> +++ b/drivers/usb/chipidea/ci.h
> @@ -275,9 +275,21 @@ static inline int ci_role_start(struct ci_hdrc *ci, enum ci_role role)
>  		return -ENXIO;
>  
>  	ret = ci->roles[role]->start(ci);
> -	if (!ret)
> -		ci->role = role;
> -	return ret;
> +	if (ret)
> +		return ret;
> +
> +	ci->role = role;
> +
> +	if (ci->usb_phy) {
> +		if (role == CI_ROLE_HOST)
> +			usb_phy_set_mode(ci->usb_phy,
> +					USB_MODE_HOST);
> +		else
> +			usb_phy_set_mode(ci->usb_phy,
> +					USB_MODE_DEVICE);
> +	}
> +
> +	return 0;
>  }
>  
>  static inline void ci_role_stop(struct ci_hdrc *ci)
> @@ -290,6 +302,9 @@ static inline void ci_role_stop(struct ci_hdrc *ci)
>  	ci->role = CI_ROLE_END;
>  
>  	ci->roles[role]->stop(ci);
> +
> +	if (ci->usb_phy)
> +		usb_phy_set_mode(ci->usb_phy, USB_MODE_NONE);
>  }
>  
>  static inline enum usb_role ci_role_to_usb_role(struct ci_hdrc *ci)
> -- 

Hi Igor,

Thanks for doing that.

We just find this series patch will break ARM32 multi_v7_defconfig
build. You may need to fix it at next revision, see below.

  CC [M]  drivers/gpu/drm/nouveau/nvkm/subdev/fb/gm200.o
In file included from /home/b29397/work/projects/usb/drivers/phy/ti/phy-omap-usb2.c:20:0:
/home/b29397/work/projects/usb/include/linux/phy/omap_control_phy.h:36:2: error: redeclaration of enumerator ‘USB_MODE_HOST’
  USB_MODE_HOST,
  ^~~~~~~~~~~~~
In file included from /home/b29397/work/projects/usb/include/linux/usb/otg.h:14:0,
                 from /home/b29397/work/projects/usb/include/linux/phy/omap_usb.h:13,
                 from /home/b29397/work/projects/usb/drivers/phy/ti/phy-omap-usb2.c:14:
/home/b29397/work/projects/usb/include/linux/usb/phy.h:69:2: note: previous definition of ‘USB_MODE_HOST’ was here
  USB_MODE_HOST,
  ^~~~~~~~~~~~~
In file included from /home/b29397/work/projects/usb/drivers/phy/ti/phy-omap-usb2.c:20:0:
/home/b29397/work/projects/usb/include/linux/phy/omap_control_phy.h:37:2: error: redeclaration of enumerator ‘USB_MODE_DEVICE’
  USB_MODE_DEVICE,
  ^~~~~~~~~~~~~~~
In file included from /home/b29397/work/projects/usb/include/linux/usb/otg.h:14:0,
                 from /home/b29397/work/projects/usb/include/linux/phy/omap_usb.h:13,
                 from /home/b29397/work/projects/usb/drivers/phy/ti/phy-omap-usb2.c:14:
/home/b29397/work/projects/usb/include/linux/usb/phy.h:70:2: note: previous definition of ‘USB_MODE_DEVICE’ was here
  USB_MODE_DEVICE,
  ^~~~~~~~~~~~~~~
/home/b29397/work/projects/usb/scripts/Makefile.build:280: recipe for target 'drivers/phy/ti/phy-omap-usb2.o' failed
make[4]: *** [drivers/phy/ti/phy-omap-usb2.o] Error 1
make[4]: *** Waiting for unfinished jobs....
  CC      drivers/pinctrl/qcom/pinctrl-ssbi-gpio.o
  CC      drivers/regulator/bcm590xx-regulator.o
  CC      drivers/pinctrl/qcom/pinctrl-spmi-mpp.o
  CC      drivers/pinctrl/qcom/pinctrl-ssbi-mpp.o
  CC      drivers/rpmsg/imx_rpmsg.o
  CC [M]  drivers/rpmsg/rpmsg_core.o
  CC      drivers/regulator/da9210-regulator.o
  CC      drivers/gpu/drm/drm_crtc_helper.o
  CC      drivers/pinctrl/samsung/pinctrl-exynos.o
  CC      drivers/gpu/drm/drm_dp_helper.o
/home/b29397/work/projects/usb/scripts/Makefile.build:497: recipe for target 'drivers/phy/ti' failed
make[3]: *** [drivers/phy/ti] Error 2

-- 

Thanks,
Peter Chen

  reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-07 12:46 [RFC PATCH v1 1/3] usb: phy: add usb mode for usb_phy Igor Opaniuk
2019-10-07 12:46 ` [RFC PATCH v1 2/3] usb: chipidea: set mode for usb phy driver Igor Opaniuk
2019-10-08  3:23   ` Peter Chen [this message]
2019-10-08  9:40     ` Igor Opaniuk
2019-10-07 12:46 ` [RFC PATCH v1 3/3] usb: phy: mxs: optimize disconnect line condition Igor Opaniuk
2019-10-07 12:52   ` Fabio Estevam
2019-10-07 13:38     ` Igor Opaniuk

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191008032326.GB5670@b29397-desktop \
    --to=peter.chen@nxp.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=igor.opaniuk@gmail.com \
    --cc=igor.opaniuk@toradex.com \
    --cc=jun.li@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=marcel.ziswiler@toradex.com \
    --cc=max.krummenacher@toradex.com \
    --cc=oleksandr.suvorov@toradex.com \
    --cc=philippe.schenker@toradex.com \
    --cc=stefan.agner@toradex.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git