From: Arnd Bergmann <arnd@arndb.de>
To: Kukjin Kim <kgene@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-samsung-soc@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linus.walleij@linaro.org,
Arnd Bergmann <arnd@arndb.de>,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [PATCH 04/36] usb: gadget: s3c-hsudc: remove platform header dependency
Date: Thu, 10 Oct 2019 22:29:48 +0200 [thread overview]
Message-ID: <20191010203043.1241612-4-arnd@arndb.de> (raw)
In-Reply-To: <20191010203043.1241612-1-arnd@arndb.de>
There is no real phy driver, so s3c-hsudc just pokes the registers
itself. Improve this a little by making it a platform data callback
like we do for gpios.
There is only one board using this driver, and it's unlikely
that another would be added, so this is a minimal workaround.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
.../include/mach/regs-s3c2443-clock.h | 49 +++++++++++++++++
arch/arm/plat-samsung/devs.c | 3 +
drivers/usb/gadget/udc/s3c-hsudc.c | 55 ++-----------------
include/linux/platform_data/s3c-hsudc.h | 2 +
4 files changed, 58 insertions(+), 51 deletions(-)
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
index 6bf924612b06..682759549e63 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-s3c2443-clock.h
@@ -10,6 +10,8 @@
#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
#define __ASM_ARM_REGS_S3C2443_CLOCK
+#include <linux/delay.h>
+
#define S3C2443_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR)
#define S3C2443_PLLCON_MDIVSHIFT 16
@@ -184,5 +186,52 @@ s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
return (unsigned int)fvco;
}
+static inline void s3c_hsudc_init_phy(void)
+{
+ u32 cfg;
+
+ cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
+ writel(cfg, S3C2443_PWRCFG);
+
+ cfg = readl(S3C2443_URSTCON);
+ cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
+ writel(cfg, S3C2443_URSTCON);
+ mdelay(1);
+
+ cfg = readl(S3C2443_URSTCON);
+ cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
+ writel(cfg, S3C2443_URSTCON);
+
+ cfg = readl(S3C2443_PHYCTRL);
+ cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
+ cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
+ writel(cfg, S3C2443_PHYCTRL);
+
+ cfg = readl(S3C2443_PHYPWR);
+ cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
+ S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
+ S3C2443_PHYPWR_ANALOG_PD);
+ cfg |= S3C2443_PHYPWR_COMMON_ON;
+ writel(cfg, S3C2443_PHYPWR);
+
+ cfg = readl(S3C2443_UCLKCON);
+ cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
+ S3C2443_UCLKCON_TCLKEN);
+ writel(cfg, S3C2443_UCLKCON);
+}
+
+static inline void s3c_hsudc_uninit_phy(void)
+{
+ u32 cfg;
+
+ cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
+ writel(cfg, S3C2443_PWRCFG);
+
+ writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
+
+ cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
+ writel(cfg, S3C2443_UCLKCON);
+}
+
#endif /* __ASM_ARM_REGS_S3C2443_CLOCK */
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 1d1fa068d228..6e4c1cb07104 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -40,6 +40,7 @@
#include <mach/dma.h>
#include <mach/irqs.h>
#include <mach/map.h>
+#include <mach/regs-s3c2443-clock.h>
#include <plat/cpu.h>
#include <plat/devs.h>
@@ -1038,6 +1039,8 @@ struct platform_device s3c_device_usb_hsudc = {
void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd)
{
s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc);
+ pd->phy_init = s3c_hsudc_init_phy;
+ pd->phy_uninit = s3c_hsudc_uninit_phy;
}
#endif /* CONFIG_PLAT_S3C24XX */
diff --git a/drivers/usb/gadget/udc/s3c-hsudc.c b/drivers/usb/gadget/udc/s3c-hsudc.c
index 858993c73442..d482cbb4bb4d 100644
--- a/drivers/usb/gadget/udc/s3c-hsudc.c
+++ b/drivers/usb/gadget/udc/s3c-hsudc.c
@@ -30,8 +30,6 @@
#include <linux/regulator/consumer.h>
#include <linux/pm_runtime.h>
-#include <mach/regs-s3c2443-clock.h>
-
#define S3C_HSUDC_REG(x) (x)
/* Non-Indexed Registers */
@@ -186,53 +184,6 @@ static inline void __orr32(void __iomem *ptr, u32 val)
writel(readl(ptr) | val, ptr);
}
-static void s3c_hsudc_init_phy(void)
-{
- u32 cfg;
-
- cfg = readl(S3C2443_PWRCFG) | S3C2443_PWRCFG_USBPHY;
- writel(cfg, S3C2443_PWRCFG);
-
- cfg = readl(S3C2443_URSTCON);
- cfg |= (S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
- writel(cfg, S3C2443_URSTCON);
- mdelay(1);
-
- cfg = readl(S3C2443_URSTCON);
- cfg &= ~(S3C2443_URSTCON_FUNCRST | S3C2443_URSTCON_PHYRST);
- writel(cfg, S3C2443_URSTCON);
-
- cfg = readl(S3C2443_PHYCTRL);
- cfg &= ~(S3C2443_PHYCTRL_CLKSEL | S3C2443_PHYCTRL_DSPORT);
- cfg |= (S3C2443_PHYCTRL_EXTCLK | S3C2443_PHYCTRL_PLLSEL);
- writel(cfg, S3C2443_PHYCTRL);
-
- cfg = readl(S3C2443_PHYPWR);
- cfg &= ~(S3C2443_PHYPWR_FSUSPEND | S3C2443_PHYPWR_PLL_PWRDN |
- S3C2443_PHYPWR_XO_ON | S3C2443_PHYPWR_PLL_REFCLK |
- S3C2443_PHYPWR_ANALOG_PD);
- cfg |= S3C2443_PHYPWR_COMMON_ON;
- writel(cfg, S3C2443_PHYPWR);
-
- cfg = readl(S3C2443_UCLKCON);
- cfg |= (S3C2443_UCLKCON_DETECT_VBUS | S3C2443_UCLKCON_FUNC_CLKEN |
- S3C2443_UCLKCON_TCLKEN);
- writel(cfg, S3C2443_UCLKCON);
-}
-
-static void s3c_hsudc_uninit_phy(void)
-{
- u32 cfg;
-
- cfg = readl(S3C2443_PWRCFG) & ~S3C2443_PWRCFG_USBPHY;
- writel(cfg, S3C2443_PWRCFG);
-
- writel(S3C2443_PHYPWR_FSUSPEND, S3C2443_PHYPWR);
-
- cfg = readl(S3C2443_UCLKCON) & ~S3C2443_UCLKCON_FUNC_CLKEN;
- writel(cfg, S3C2443_UCLKCON);
-}
-
/**
* s3c_hsudc_complete_request - Complete a transfer request.
* @hsep: Endpoint to which the request belongs.
@@ -1188,7 +1139,8 @@ static int s3c_hsudc_start(struct usb_gadget *gadget,
pm_runtime_get_sync(hsudc->dev);
- s3c_hsudc_init_phy();
+ if (hsudc->pd->phy_init)
+ hsudc->pd->gpio_init();
if (hsudc->pd->gpio_init)
hsudc->pd->gpio_init();
@@ -1210,7 +1162,8 @@ static int s3c_hsudc_stop(struct usb_gadget *gadget)
spin_lock_irqsave(&hsudc->lock, flags);
hsudc->gadget.speed = USB_SPEED_UNKNOWN;
- s3c_hsudc_uninit_phy();
+ if (hsudc->pd->phy_uninit)
+ hsudc->pd->phy_uninit();
pm_runtime_put(hsudc->dev);
diff --git a/include/linux/platform_data/s3c-hsudc.h b/include/linux/platform_data/s3c-hsudc.h
index 4dc9b8760166..a170939832d5 100644
--- a/include/linux/platform_data/s3c-hsudc.h
+++ b/include/linux/platform_data/s3c-hsudc.h
@@ -26,6 +26,8 @@ struct s3c24xx_hsudc_platdata {
unsigned int epnum;
void (*gpio_init)(void);
void (*gpio_uninit)(void);
+ void (*phy_init)(void);
+ void (*phy_uninit)(void);
};
#endif /* __LINUX_USB_S3C_HSUDC_H */
--
2.20.0
next prev parent reply other threads:[~2019-10-10 20:32 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-10 20:28 [PATCH 00/36] ARM: samsung platform cleanup Arnd Bergmann
[not found] ` <20191010203043.1241612-1-arnd@arndb.de>
2019-10-10 20:29 ` [PATCH 03/36] usb: gadget: s3c: use platform resources Arnd Bergmann
2019-10-23 10:06 ` Krzysztof Kozlowski
2019-10-23 12:46 ` Krzysztof Kozlowski
2019-10-23 13:26 ` Arnd Bergmann
2019-10-10 20:29 ` Arnd Bergmann [this message]
2019-10-23 10:09 ` [PATCH 04/36] usb: gadget: s3c-hsudc: remove platform header dependency Krzysztof Kozlowski
2019-10-23 12:21 ` Arnd Bergmann
2019-10-10 20:30 ` [PATCH 34/36] ARM: s3c: stop including mach/hardware.h from mach/io.h Arnd Bergmann
2019-10-10 21:02 ` Russell King - ARM Linux admin
2019-10-10 21:53 ` Arnd Bergmann
2019-10-23 13:10 ` [PATCH 00/36] ARM: samsung platform cleanup Krzysztof Kozlowski
2019-10-23 13:39 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191010203043.1241612-4-arnd@arndb.de \
--to=arnd@arndb.de \
--cc=balbi@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=kgene@kernel.org \
--cc=krzk@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).