From: Greg KH <gregkh@linuxfoundation.org>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>,
linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org
Subject: [GIT PULL] USB fixes for 5.4-rc3
Date: Sat, 12 Oct 2019 18:15:53 +0200 [thread overview]
Message-ID: <20191012161553.GA2191565@kroah.com> (raw)
The following changes since commit 54ecb8f7028c5eb3d740bb82b0f1d90f2df63c5c:
Linux 5.4-rc1 (2019-09-30 10:35:40 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git tags/usb-5.4-rc3
for you to fetch changes up to aafb00a977cf7d81821f7c9d12e04c558c22dc3c:
USB: yurex: fix NULL-derefs on disconnect (2019-10-10 14:24:06 +0200)
----------------------------------------------------------------
USB fixes for 5.4-rc3
Here are a lot of small USB driver fixes for 5.4-rc3.
syzbot has stepped up its testing of the USB driver stack, now able to
trigger fun race conditions between disconnect and probe functions.
Because of that we have a lot of fixes in here from Johan and others
fixing these reported issues that have been around since almost all
time.
We also are just deleting the rio500 driver, making all of the syzbot
bugs found in it moot as it turns out no one has been using it for years
as there is a userspace version that is being used instead.
There are also a number of other small fixes in here, all resolving
reported issues or regressions.
All have been in linux-next without any reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
----------------------------------------------------------------
Alan Stern (1):
USB: yurex: Don't retry on unexpected errors
Arnd Bergmann (1):
udc: lpc32xx: fix 64-bit compiler warning
Bastien Nocera (1):
USB: rio500: Remove Rio 500 kernel driver
Beni Mahler (1):
USB: serial: ftdi_sio: add device IDs for Sienna and Echelon PL-20
Bill Kuzeja (1):
xhci: Prevent deadlock when xhci adapter breaks during init
Dan Carpenter (2):
usb: cdns3: Fix use after free in probe error handling
usb: typec: tcpm: usb: typec: tcpm: Fix a signedness bug in tcpm_fw_get_caps()
Daniele Palmas (1):
USB: serial: option: add Telit FN980 compositions
Greg Kroah-Hartman (1):
Merge tag 'usb-serial-5.4-rc2' of https://git.kernel.org/.../johan/usb-serial into usb-linus
Hans de Goede (3):
driver core: platform: Add platform_get_irq_byname_optional()
usb: dwc3: Switch to platform_get_irq_byname_optional()
usb: dwc3: Remove dev_err() on platform_get_irq() failure
Heikki Krogerus (2):
usb: typec: ucsi: ccg: Remove run_isr flag
usb: typec: ucsi: displayport: Fix for the mode entering routine
Jacky.Cao@sony.com (1):
USB: dummy-hcd: fix power budget for SuperSpeed mode
Jan Schmidt (1):
xhci: Check all endpoints for LPM timeout
Johan Hovold (30):
USB: serial: keyspan: fix NULL-derefs on open() and write()
USB: microtek: fix info-leak at probe
USB: adutux: fix use-after-free on disconnect
USB: adutux: fix NULL-derefs on disconnect
USB: usblcd: fix I/O after disconnect
USB: usblcd: drop redundant disconnect mutex
USB: usblcd: drop redundant lcd mutex
USB: usblcd: use pr_err()
USB: legousbtower: fix slab info leak at probe
USB: legousbtower: fix deadlock on disconnect
USB: legousbtower: fix potential NULL-deref on disconnect
USB: legousbtower: fix open after failed reset request
USB: usb-skeleton: fix runtime PM after driver unbind
USB: usblp: fix runtime PM after driver unbind
USB: serial: fix runtime PM after driver unbind
media: stkwebcam: fix runtime PM after driver unbind
USB: usb-skeleton: fix NULL-deref on disconnect
USB: usb-skeleton: fix use-after-free after driver unbind
USB: usb-skeleton: drop redundant in-urb check
USB: legousbtower: fix use-after-free on release
USB: ldusb: fix NULL-derefs on driver unbind
USB: adutux: fix use-after-free on release
USB: chaoskey: fix use-after-free on release
USB: iowarrior: fix use-after-free on disconnect
USB: iowarrior: fix use-after-free on release
USB: iowarrior: fix use-after-free after driver unbind
USB: iowarrior: drop redundant disconnect mutex
USB: iowarrior: drop redundant iowarrior mutex
USB: iowarrior: use pr_err()
USB: yurex: fix NULL-derefs on disconnect
Jonathan Neuschäfer (1):
dt-bindings: usb: Fix references to usb-hcd.yaml
Kai-Heng Feng (1):
xhci: Increase STS_SAVE timeout in xhci_suspend()
Mao Wenan (1):
usbip: vhci_hcd indicate failed message
Mathias Nyman (4):
xhci: Fix false warning message about wrong bounce buffer write length
xhci: Prevent device initiated U1/U2 link pm if exit latency is too long
xhci: Fix USB 3.1 capability detection on early xHCI 1.1 spec based hosts
xhci: Fix NULL pointer dereference in xhci_clear_tt_buffer_complete()
Mauro Carvalho Chehab (1):
bindings: rename links to mason USB2/USB3 DT files
Maxime Ripard (2):
ARM: dts: sunxi: Revert phy-names removal for ECHI and OHCI
dt-bindings: usb: Bring back phy-names
Pawel Laszczak (3):
usb: cdns3: Fix sheduling with locks held.
usb:cdns3: Fix for CV CH9 running with g_zero driver.
usb: cdns3: Fix for incorrect DMA mask.
Reinhard Speyerer (1):
USB: serial: option: add support for Cinterion CLS8 devices
Rick Tseng (1):
usb: xhci: wait for CNR controller not ready bit in xhci resume
Roger Quadros (2):
usb: cdns3: gadget: Fix full-speed mode
usb: cdns3: fix cdns3_core_init_role()
Wei Yongjun (1):
xhci-ext-caps.c: Add missing platform_device_put() on error in xhci_create_intel_xhci_sw_pdev()
Yoshihiro Shimoda (2):
usb: renesas_usbhs: gadget: Do not discard queues in usb_ep_set_{halt,wedge}()
usb: renesas_usbhs: gadget: Fix usb_ep_set_{halt,wedge}() behavior
.../devicetree/bindings/usb/amlogic,dwc3.txt | 4 +-
.../devicetree/bindings/usb/generic-ehci.yaml | 7 +-
.../devicetree/bindings/usb/generic-ohci.yaml | 7 +-
.../devicetree/bindings/usb/mediatek,mtk-xhci.txt | 4 +-
.../devicetree/bindings/usb/mediatek,mtu3.txt | 4 +-
Documentation/devicetree/bindings/usb/usb-hcd.yaml | 5 +
Documentation/devicetree/bindings/usb/usb-uhci.txt | 2 +-
Documentation/devicetree/bindings/usb/usb-xhci.txt | 4 +-
Documentation/usb/rio.rst | 109 ----
MAINTAINERS | 7 -
arch/arm/boot/dts/sun4i-a10.dtsi | 4 +
arch/arm/boot/dts/sun5i.dtsi | 2 +
arch/arm/boot/dts/sun6i-a31.dtsi | 4 +
arch/arm/boot/dts/sun7i-a20.dtsi | 4 +
arch/arm/boot/dts/sun8i-a23-a33.dtsi | 2 +
arch/arm/boot/dts/sun8i-a83t.dtsi | 3 +
arch/arm/boot/dts/sun8i-r40.dtsi | 4 +
arch/arm/boot/dts/sun9i-a80.dtsi | 5 +
arch/arm/boot/dts/sunxi-h3-h5.dtsi | 6 +
arch/arm/configs/badge4_defconfig | 1 -
arch/arm/configs/corgi_defconfig | 1 -
arch/arm/configs/pxa_defconfig | 1 -
arch/arm/configs/s3c2410_defconfig | 1 -
arch/arm/configs/spitz_defconfig | 1 -
.../boot/dts/allwinner/sun50i-a64-pinebook.dts | 2 +
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 2 +
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 2 +
arch/mips/configs/mtx1_defconfig | 1 -
arch/mips/configs/rm200_defconfig | 1 -
drivers/base/platform.c | 46 +-
drivers/media/usb/stkwebcam/stk-webcam.c | 3 +-
drivers/usb/cdns3/cdns3-pci-wrap.c | 3 +-
drivers/usb/cdns3/core.c | 20 +-
drivers/usb/cdns3/ep0.c | 12 +-
drivers/usb/cdns3/gadget.c | 8 +
drivers/usb/class/usblp.c | 8 +-
drivers/usb/dwc3/drd.c | 7 +-
drivers/usb/dwc3/gadget.c | 7 +-
drivers/usb/dwc3/host.c | 7 +-
drivers/usb/gadget/udc/Kconfig | 2 +-
drivers/usb/gadget/udc/dummy_hcd.c | 3 +-
drivers/usb/gadget/udc/lpc32xx_udc.c | 4 +-
drivers/usb/host/xhci-ext-caps.c | 1 +
drivers/usb/host/xhci-ring.c | 4 +-
drivers/usb/host/xhci.c | 78 ++-
drivers/usb/image/microtek.c | 4 +
drivers/usb/misc/Kconfig | 10 -
drivers/usb/misc/Makefile | 1 -
drivers/usb/misc/adutux.c | 24 +-
drivers/usb/misc/chaoskey.c | 5 +-
drivers/usb/misc/iowarrior.c | 48 +-
drivers/usb/misc/ldusb.c | 24 +-
drivers/usb/misc/legousbtower.c | 58 +--
drivers/usb/misc/rio500.c | 554 ---------------------
drivers/usb/misc/rio500_usb.h | 20 -
drivers/usb/misc/usblcd.c | 60 ++-
drivers/usb/misc/yurex.c | 18 +-
drivers/usb/renesas_usbhs/common.h | 1 +
drivers/usb/renesas_usbhs/fifo.c | 2 +-
drivers/usb/renesas_usbhs/fifo.h | 1 +
drivers/usb/renesas_usbhs/mod_gadget.c | 18 +-
drivers/usb/renesas_usbhs/pipe.c | 15 +
drivers/usb/renesas_usbhs/pipe.h | 1 +
drivers/usb/serial/ftdi_sio.c | 3 +
drivers/usb/serial/ftdi_sio_ids.h | 9 +
drivers/usb/serial/keyspan.c | 4 +-
drivers/usb/serial/option.c | 11 +
drivers/usb/serial/usb-serial.c | 5 +-
drivers/usb/typec/tcpm/tcpm.c | 14 +-
drivers/usb/typec/ucsi/displayport.c | 2 +
drivers/usb/typec/ucsi/ucsi_ccg.c | 42 +-
drivers/usb/usb-skeleton.c | 19 +-
drivers/usb/usbip/vhci_hcd.c | 4 +-
include/linux/platform_device.h | 2 +
74 files changed, 431 insertions(+), 961 deletions(-)
delete mode 100644 Documentation/usb/rio.rst
delete mode 100644 drivers/usb/misc/rio500.c
delete mode 100644 drivers/usb/misc/rio500_usb.h
next reply other threads:[~2019-10-12 16:18 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-12 16:15 Greg KH [this message]
2019-10-12 22:55 ` [GIT PULL] USB fixes for 5.4-rc3 pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191012161553.GA2191565@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).