From: Mika Westerberg <mika.westerberg@linux.intel.com>
To: linux-usb@vger.kernel.org
Cc: Andreas Noever <andreas.noever@gmail.com>,
Michael Jamet <michael.jamet@intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Yehezkel Bernat <YehezkelShB@gmail.com>,
Rajmohan Mani <rajmohan.mani@intel.com>,
Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>,
Lukas Wunner <lukas@wunner.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Alan Stern <stern@rowland.harvard.edu>,
Mario.Limonciello@dell.com,
Anthony Wong <anthony.wong@canonical.com>,
Oliver Neukum <oneukum@suse.com>,
Christian Kellner <ckellner@redhat.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH 04/25] thunderbolt: Convert basic adapter register names to follow the USB4 spec
Date: Wed, 23 Oct 2019 14:21:33 +0300 [thread overview]
Message-ID: <20191023112154.64235-5-mika.westerberg@linux.intel.com> (raw)
In-Reply-To: <20191023112154.64235-1-mika.westerberg@linux.intel.com>
Now that USB4 spec has names for these basic registers we can use them
instead. This makes it easier to match certain register to the spec.
No functional changes.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
---
drivers/thunderbolt/switch.c | 18 +++++++++---------
drivers/thunderbolt/tb_regs.h | 15 ++++++++-------
drivers/thunderbolt/tunnel.c | 10 +++++-----
3 files changed, 22 insertions(+), 21 deletions(-)
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c
index fd7878020f70..afc725cf27c9 100644
--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -553,17 +553,17 @@ int tb_port_add_nfc_credits(struct tb_port *port, int credits)
if (credits == 0 || port->sw->is_unplugged)
return 0;
- nfc_credits = port->config.nfc_credits & TB_PORT_NFC_CREDITS_MASK;
+ nfc_credits = port->config.nfc_credits & ADP_CS_4_NFC_BUFFERS_MASK;
nfc_credits += credits;
- tb_port_dbg(port, "adding %d NFC credits to %lu",
- credits, port->config.nfc_credits & TB_PORT_NFC_CREDITS_MASK);
+ tb_port_dbg(port, "adding %d NFC credits to %lu", credits,
+ port->config.nfc_credits & ADP_CS_4_NFC_BUFFERS_MASK);
- port->config.nfc_credits &= ~TB_PORT_NFC_CREDITS_MASK;
+ port->config.nfc_credits &= ~ADP_CS_4_NFC_BUFFERS_MASK;
port->config.nfc_credits |= nfc_credits;
return tb_port_write(port, &port->config.nfc_credits,
- TB_CFG_PORT, 4, 1);
+ TB_CFG_PORT, ADP_CS_4, 1);
}
/**
@@ -578,14 +578,14 @@ int tb_port_set_initial_credits(struct tb_port *port, u32 credits)
u32 data;
int ret;
- ret = tb_port_read(port, &data, TB_CFG_PORT, 5, 1);
+ ret = tb_port_read(port, &data, TB_CFG_PORT, ADP_CS_5, 1);
if (ret)
return ret;
- data &= ~TB_PORT_LCA_MASK;
- data |= (credits << TB_PORT_LCA_SHIFT) & TB_PORT_LCA_MASK;
+ data &= ~ADP_CS_5_LCA_MASK;
+ data |= (credits << ADP_CS_5_LCA_SHIFT) & ADP_CS_5_LCA_MASK;
- return tb_port_write(port, &data, TB_CFG_PORT, 5, 1);
+ return tb_port_write(port, &data, TB_CFG_PORT, ADP_CS_5, 1);
}
/**
diff --git a/drivers/thunderbolt/tb_regs.h b/drivers/thunderbolt/tb_regs.h
index deb9d4a977b9..d0858db9f904 100644
--- a/drivers/thunderbolt/tb_regs.h
+++ b/drivers/thunderbolt/tb_regs.h
@@ -211,13 +211,14 @@ struct tb_regs_port_header {
} __packed;
-/* DWORD 4 */
-#define TB_PORT_NFC_CREDITS_MASK GENMASK(19, 0)
-#define TB_PORT_MAX_CREDITS_SHIFT 20
-#define TB_PORT_MAX_CREDITS_MASK GENMASK(26, 20)
-/* DWORD 5 */
-#define TB_PORT_LCA_SHIFT 22
-#define TB_PORT_LCA_MASK GENMASK(28, 22)
+/* Basic adapter configuration registers */
+#define ADP_CS_4 0x04
+#define ADP_CS_4_NFC_BUFFERS_MASK GENMASK(9, 0)
+#define ADP_CS_4_TOTAL_BUFFERS_MASK GENMASK(29, 20)
+#define ADP_CS_4_TOTAL_BUFFERS_SHIFT 20
+#define ADP_CS_5 0x05
+#define ADP_CS_5_LCA_MASK GENMASK(28, 22)
+#define ADP_CS_5_LCA_SHIFT 22
/* Display Port adapter registers */
diff --git a/drivers/thunderbolt/tunnel.c b/drivers/thunderbolt/tunnel.c
index 5a99234826e7..2f728029c12d 100644
--- a/drivers/thunderbolt/tunnel.c
+++ b/drivers/thunderbolt/tunnel.c
@@ -324,12 +324,12 @@ static void tb_dp_init_video_path(struct tb_path *path, bool discover)
path->weight = 1;
if (discover) {
- path->nfc_credits = nfc_credits & TB_PORT_NFC_CREDITS_MASK;
+ path->nfc_credits = nfc_credits & ADP_CS_4_NFC_BUFFERS_MASK;
} else {
u32 max_credits;
- max_credits = (nfc_credits & TB_PORT_MAX_CREDITS_MASK) >>
- TB_PORT_MAX_CREDITS_SHIFT;
+ max_credits = (nfc_credits & ADP_CS_4_TOTAL_BUFFERS_MASK) >>
+ ADP_CS_4_TOTAL_BUFFERS_SHIFT;
/* Leave some credits for AUX path */
path->nfc_credits = min(max_credits - 2, 12U);
}
@@ -478,8 +478,8 @@ static u32 tb_dma_credits(struct tb_port *nhi)
{
u32 max_credits;
- max_credits = (nhi->config.nfc_credits & TB_PORT_MAX_CREDITS_MASK) >>
- TB_PORT_MAX_CREDITS_SHIFT;
+ max_credits = (nhi->config.nfc_credits & ADP_CS_4_TOTAL_BUFFERS_MASK) >>
+ ADP_CS_4_TOTAL_BUFFERS_SHIFT;
return min(max_credits, 13U);
}
--
2.23.0
next prev parent reply other threads:[~2019-10-23 11:23 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-23 11:21 [PATCH 00/25] thunderbolt: Add support for USB4 Mika Westerberg
2019-10-23 11:21 ` [PATCH 01/25] thunderbolt: Introduce tb_switch_is_icm() Mika Westerberg
2019-10-23 11:21 ` [PATCH 02/25] thunderbolt: Log switch route string on config read/write timeout Mika Westerberg
2019-10-23 11:21 ` [PATCH 03/25] thunderbolt: Log error if adding switch fails Mika Westerberg
2019-10-23 11:21 ` Mika Westerberg [this message]
2019-10-23 11:21 ` [PATCH 05/25] thunderbolt: Convert PCIe adapter register names to follow the USB4 spec Mika Westerberg
2019-10-23 11:21 ` [PATCH 06/25] thunderbolt: Convert DP " Mika Westerberg
2019-10-23 11:21 ` [PATCH 07/25] thunderbolt: Make tb_sw_write() take const parameter Mika Westerberg
2019-10-23 11:21 ` [PATCH 08/25] thunderbolt: Add helper macro to iterate over switch ports Mika Westerberg
2019-10-23 11:21 ` [PATCH 09/25] thunderbolt: Refactor add_switch() into two functions Mika Westerberg
2019-10-23 11:21 ` [PATCH 10/25] thunderbolt: Add support for lane bonding Mika Westerberg
2019-10-23 11:21 ` [PATCH 11/25] thunderbolt: Add default linking between lane adapters if not provided by DROM Mika Westerberg
2019-10-23 11:21 ` [PATCH 12/25] thunderbolt: Expand controller name in tb_switch_is_xy() Mika Westerberg
2019-10-23 11:21 ` [PATCH 13/25] thunderbolt: Add downstream PCIe port mappings for Alpine and Titan Ridge Mika Westerberg
2019-10-23 11:21 ` [PATCH 14/25] thunderbolt: Add Display Port CM handshake for Titan Ridge devices Mika Westerberg
2019-10-23 11:21 ` [PATCH 15/25] thunderbolt: Add Display Port adapter pairing and resource management Mika Westerberg
2019-10-23 11:21 ` [PATCH 16/25] thunderbolt: Add bandwidth management for Display Port tunnels Mika Westerberg
2019-10-23 11:21 ` [PATCH 17/25] thunderbolt: Do not start firmware unless asked by the user Mika Westerberg
2019-10-23 11:21 ` [PATCH 18/25] thunderbolt: Make tb_find_port() available to other files Mika Westerberg
2019-10-23 11:21 ` [PATCH 19/25] thunderbolt: Call tb_eeprom_get_drom_offset() from tb_eeprom_read_n() Mika Westerberg
2019-10-23 11:21 ` [PATCH 20/25] thunderbolt: Add initial support for USB4 Mika Westerberg
2019-10-23 11:21 ` [PATCH 21/25] thunderbolt: Update Kconfig entry to USB4 Mika Westerberg
2019-10-23 11:21 ` [PATCH 22/25] thunderbolt: Make tb_switch_find_cap() available to other files Mika Westerberg
2019-10-23 11:21 ` [PATCH 23/25] thunderbolt: Add support for Time Management Unit Mika Westerberg
2019-10-23 11:21 ` [PATCH 24/25] thunderbolt: Add support for USB 3.x tunnels Mika Westerberg
2019-10-23 11:21 ` [PATCH 25/25] thunderbolt: Update documentation with the USB4 information Mika Westerberg
2019-10-23 15:55 ` [PATCH 00/25] thunderbolt: Add support for USB4 Mario.Limonciello
2019-10-23 16:18 ` Mika Westerberg
2019-11-01 11:43 ` Mika Westerberg
2019-11-04 14:31 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191023112154.64235-5-mika.westerberg@linux.intel.com \
--to=mika.westerberg@linux.intel.com \
--cc=Mario.Limonciello@dell.com \
--cc=YehezkelShB@gmail.com \
--cc=andreas.noever@gmail.com \
--cc=anthony.wong@canonical.com \
--cc=ckellner@redhat.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=lukas@wunner.de \
--cc=michael.jamet@intel.com \
--cc=nicholas.johnson-opensource@outlook.com.au \
--cc=oneukum@suse.com \
--cc=rajmohan.mani@intel.com \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).