From: John Stultz <john.stultz@linaro.org>
To: lkml <linux-kernel@vger.kernel.org>
Cc: John Stultz <john.stultz@linaro.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
ShuFan Lee <shufan_lee@richtek.com>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Yu Chen <chenyu56@huawei.com>, Felipe Balbi <balbi@kernel.org>,
Hans de Goede <hdegoede@redhat.com>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Jun Li <lijun.kernel@gmail.com>,
Valentin Schneider <valentin.schneider@arm.com>,
Jack Pham <jackp@codeaurora.org>,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v6 3/8] usb: dwc3: Add support for role-switch-default-mode binding
Date: Thu, 28 Nov 2019 05:09:56 +0000 [thread overview]
Message-ID: <20191128051001.18995-4-john.stultz@linaro.org> (raw)
In-Reply-To: <20191128051001.18995-1-john.stultz@linaro.org>
Support the new role-switch-default-mode binding for configuring
the default role the controller assumes as when the usb role is
USB_ROLE_NONE
This patch was split out from a larger patch originally by
Yu Chen <chenyu56@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
CC: ShuFan Lee <shufan_lee@richtek.com>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Yu Chen <chenyu56@huawei.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jun Li <lijun.kernel@gmail.com>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Jack Pham <jackp@codeaurora.org>
Cc: linux-usb@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Change-Id: Ic6e4df1109b350deaecdc69f667d49ce91d599f3
---
v3: Split this patch out from addition of usb-role-switch
handling
v5: Reworked to use string based role-switch-default-mode
---
drivers/usb/dwc3/core.h | 3 +++
drivers/usb/dwc3/drd.c | 25 ++++++++++++++++++++++---
2 files changed, 25 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 6f19e9891767..3c879c9ab1aa 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -953,6 +953,8 @@ struct dwc3_scratchpad_array {
* - USBPHY_INTERFACE_MODE_UTMI
* - USBPHY_INTERFACE_MODE_UTMIW
* @role_sw: usb_role_switch handle
+ * @role_switch_default_mode: default operation mode of controller while
+ * usb role is USB_ROLE_NONE.
* @usb2_phy: pointer to USB2 PHY
* @usb3_phy: pointer to USB3 PHY
* @usb2_generic_phy: pointer to USB2 PHY
@@ -1087,6 +1089,7 @@ struct dwc3 {
struct notifier_block edev_nb;
enum usb_phy_interface hsphy_mode;
struct usb_role_switch *role_sw;
+ enum usb_dr_mode role_switch_default_mode;
u32 fladj;
u32 irq_gadget;
diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
index 3b57d2ddda93..865341facece 100644
--- a/drivers/usb/dwc3/drd.c
+++ b/drivers/usb/dwc3/drd.c
@@ -491,7 +491,10 @@ static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role)
mode = DWC3_GCTL_PRTCAP_DEVICE;
break;
default:
- mode = DWC3_GCTL_PRTCAP_DEVICE;
+ if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
+ mode = DWC3_GCTL_PRTCAP_HOST;
+ else
+ mode = DWC3_GCTL_PRTCAP_DEVICE;
break;
}
@@ -517,7 +520,10 @@ static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
role = dwc->current_otg_role;
break;
default:
- role = USB_ROLE_DEVICE;
+ if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
+ role = USB_ROLE_HOST;
+ else
+ role = USB_ROLE_DEVICE;
break;
}
spin_unlock_irqrestore(&dwc->lock, flags);
@@ -527,6 +533,19 @@ static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
static int dwc3_setup_role_switch(struct dwc3 *dwc)
{
struct usb_role_switch_desc dwc3_role_switch = {NULL};
+ const char *str;
+ u32 mode;
+ int ret;
+
+ ret = device_property_read_string(dwc->dev, "role-switch-default-mode",
+ &str);
+ if (ret >= 0 && !strncmp(str, "host", strlen("host"))) {
+ dwc->role_switch_default_mode = USB_DR_MODE_HOST;
+ mode = DWC3_GCTL_PRTCAP_HOST;
+ } else {
+ dwc->role_switch_default_mode = USB_DR_MODE_PERIPHERAL;
+ mode = DWC3_GCTL_PRTCAP_DEVICE;
+ }
dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
dwc3_role_switch.set = dwc3_usb_role_switch_set;
@@ -535,7 +554,7 @@ static int dwc3_setup_role_switch(struct dwc3 *dwc)
if (IS_ERR(dwc->role_sw))
return PTR_ERR(dwc->role_sw);
- dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE);
+ dwc3_set_mode(dwc, mode);
return 0;
}
#else
--
2.17.1
next prev parent reply other threads:[~2019-11-28 5:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-28 5:09 [PATCH v6 0/8] HiKey960 USB support John Stultz
2019-11-28 5:09 ` [PATCH v6 1/8] usb: dwc3: Registering a role switch in the DRD code John Stultz
2019-12-02 10:33 ` Bryan O'Donoghue
2019-12-02 10:33 ` Bryan O'Donoghue
2019-11-28 5:09 ` [PATCH v6 2/8] dt-bindings: usb: generic: Add role-switch-default-mode binding John Stultz
2019-11-28 5:09 ` John Stultz [this message]
2019-12-02 10:32 ` [PATCH v6 3/8] usb: dwc3: Add support for " Bryan O'Donoghue
2019-12-02 10:34 ` Bryan O'Donoghue
2019-11-28 5:09 ` [PATCH v6 4/8] dt-bindings: usb: dwc3: Allow clock list & resets to be more flexible John Stultz
2019-11-28 5:09 ` [PATCH v6 5/8] usb: dwc3: Rework clock initialization " John Stultz
2019-11-28 5:09 ` [PATCH v6 6/8] usb: dwc3: Rework resets " John Stultz
2019-11-28 5:10 ` [PATCH v6 7/8] dt-bindings: misc: Add bindings for HiSilicon usb hub and data role switch functionality on HiKey960 John Stultz
2019-11-28 5:10 ` [PATCH v6 8/8] misc: hisi_hikey_usb: Driver to support usb functionality of Hikey960 John Stultz
2019-12-10 10:26 ` Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191128051001.18995-4-john.stultz@linaro.org \
--to=john.stultz@linaro.org \
--cc=andy.shevchenko@gmail.com \
--cc=balbi@kernel.org \
--cc=chenyu56@huawei.com \
--cc=chunfeng.yun@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=jackp@codeaurora.org \
--cc=lijun.kernel@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=shufan_lee@richtek.com \
--cc=suzuki.poulose@arm.com \
--cc=valentin.schneider@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).