From: Fredrik Noring <noring@nocrew.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christoph Hellwig <hch@lst.de>, linux-usb@vger.kernel.org
Subject: [PATCH v2] USB: Fix incorrect DMA allocations for local memory pool drivers
Date: Tue, 10 Dec 2019 18:29:05 +0100 [thread overview]
Message-ID: <20191210172905.GA52526@sx9> (raw)
In-Reply-To: <20191210112210.GA3774386@kroah.com>
Fix commit 7b81cb6bddd2 ("usb: add a HCD_DMA flag instead of
guestimating DMA capabilities") where local memory USB drivers
erroneously allocate DMA memory instead of pool memory, causing
OHCI Unrecoverable Error, disabled
HC died; cleaning up
The order between hcd_uses_dma() and hcd->localmem_pool is now
arranged as in hcd_buffer_alloc() and hcd_buffer_free(), with the
test for hcd->localmem_pool placed first.
As an alternative, one might consider adjusting hcd_uses_dma() with
static inline bool hcd_uses_dma(struct usb_hcd *hcd)
{
- return IS_ENABLED(CONFIG_HAS_DMA) && (hcd->driver->flags & HCD_DMA);
+ return IS_ENABLED(CONFIG_HAS_DMA) &&
+ (hcd->driver->flags & HCD_DMA) &&
+ (hcd->localmem_pool == NULL);
}
One can also consider unsetting HCD_DMA for local memory pool drivers.
Fixes: 7b81cb6bddd2 ("usb: add a HCD_DMA flag instead of guestimating DMA capabilities")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Fredrik Noring <noring@nocrew.org>
---
Hi Greg,
> This patch doesn't apply against 5.5-rc1, can you refresh it and resend?
Sure, please find updated patch v2 attached below.
Changes in v2:
- Update to v5.5-rc1 resolving conflict with commit b3d53f5fce5d ("usb: core: Remove redundant vmap checks")
- Fix "Fixes:" line
- Add "Cc: stable <stable@vger.kernel.org>"
---
drivers/usb/core/hcd.c | 42 +++++++++++++++++-----------------
drivers/usb/storage/scsiglue.c | 3 ++-
2 files changed, 23 insertions(+), 22 deletions(-)
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 281568d464f9..aa45840d8273 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1409,7 +1409,17 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
if (usb_endpoint_xfer_control(&urb->ep->desc)) {
if (hcd->self.uses_pio_for_control)
return ret;
- if (hcd_uses_dma(hcd)) {
+ if (hcd->localmem_pool) {
+ ret = hcd_alloc_coherent(
+ urb->dev->bus, mem_flags,
+ &urb->setup_dma,
+ (void **)&urb->setup_packet,
+ sizeof(struct usb_ctrlrequest),
+ DMA_TO_DEVICE);
+ if (ret)
+ return ret;
+ urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
+ } else if (hcd_uses_dma(hcd)) {
if (object_is_on_stack(urb->setup_packet)) {
WARN_ONCE(1, "setup packet is on stack\n");
return -EAGAIN;
@@ -1424,23 +1434,22 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
urb->setup_dma))
return -EAGAIN;
urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
- } else if (hcd->localmem_pool) {
- ret = hcd_alloc_coherent(
- urb->dev->bus, mem_flags,
- &urb->setup_dma,
- (void **)&urb->setup_packet,
- sizeof(struct usb_ctrlrequest),
- DMA_TO_DEVICE);
- if (ret)
- return ret;
- urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
}
}
dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
if (urb->transfer_buffer_length != 0
&& !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
- if (hcd_uses_dma(hcd)) {
+ if (hcd->localmem_pool) {
+ ret = hcd_alloc_coherent(
+ urb->dev->bus, mem_flags,
+ &urb->transfer_dma,
+ &urb->transfer_buffer,
+ urb->transfer_buffer_length,
+ dir);
+ if (ret == 0)
+ urb->transfer_flags |= URB_MAP_LOCAL;
+ } else if (hcd_uses_dma(hcd)) {
if (urb->num_sgs) {
int n;
@@ -1491,15 +1500,6 @@ int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
else
urb->transfer_flags |= URB_DMA_MAP_SINGLE;
}
- } else if (hcd->localmem_pool) {
- ret = hcd_alloc_coherent(
- urb->dev->bus, mem_flags,
- &urb->transfer_dma,
- &urb->transfer_buffer,
- urb->transfer_buffer_length,
- dir);
- if (ret == 0)
- urb->transfer_flags |= URB_MAP_LOCAL;
}
if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
URB_SETUP_MAP_LOCAL)))
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index 66a4dcbbb1fc..f4c2359abb1b 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -135,7 +135,8 @@ static int slave_configure(struct scsi_device *sdev)
* For such controllers we need to make sure the block layer sets
* up bounce buffers in addressable memory.
*/
- if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)))
+ if (!hcd_uses_dma(bus_to_hcd(us->pusb_dev->bus)) ||
+ (bus_to_hcd(us->pusb_dev->bus)->localmem_pool != NULL))
blk_queue_bounce_limit(sdev->request_queue, BLK_BOUNCE_HIGH);
/*
--
2.23.0
prev parent reply other threads:[~2019-12-10 17:29 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-30 16:50 [PATCH] USB: Fix incorrect DMA allocations for local memory pool drivers Fredrik Noring
2019-12-03 7:39 ` Christoph Hellwig
2019-12-03 16:54 ` Fredrik Noring
2019-12-03 8:12 ` Johan Hovold
2019-12-03 16:55 ` Fredrik Noring
2019-12-10 11:22 ` Greg Kroah-Hartman
2019-12-10 17:29 ` Fredrik Noring [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191210172905.GA52526@sx9 \
--to=noring@nocrew.org \
--cc=gregkh@linuxfoundation.org \
--cc=hch@lst.de \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).