linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: <min.guo@mediatek.com>
To: Bin Liu <b-liu@ti.com>, Rob Herring <robh+dt@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Alan Stern <stern@rowland.harvard.edu>,
	<chunfeng.yun@mediatek.com>, <linux-usb@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>, <tony@atomide.com>,
	<hdegoede@redhat.com>, Min Guo <min.guo@mediatek.com>
Subject: [PATCH v9 5/6] usb: musb: Add musb_clearb/w() interface
Date: Wed, 11 Dec 2019 09:54:45 +0800	[thread overview]
Message-ID: <20191211015446.11477-6-min.guo@mediatek.com> (raw)
In-Reply-To: <20191211015446.11477-1-min.guo@mediatek.com>

From: Min Guo <min.guo@mediatek.com>

Delete the const attribute of addr parameter in readb/w/l hooks, these
changes are for implementing clearing W1C registers.
Replace musb_readb/w with musb_clearb/w to clear the interrupt status.

Signed-off-by: Min Guo <min.guo@mediatek.com>
---
changes in v9:
1. no changes

changes in v8:
1. no changes

changes in v7:
1. no changes

changes in v6:
1. no changes

changes in v5:
1. Replace musb_readb() with musb_clearb() to clear dma pending interrupts

new patch based on v4:
---
 drivers/usb/musb/musb_core.c | 32 +++++++++++++++++++++++---------
 drivers/usb/musb/musb_core.h |  8 ++++++--
 drivers/usb/musb/musb_io.h   |  8 +++++---
 drivers/usb/musb/musbhsdma.c |  2 +-
 drivers/usb/musb/sunxi.c     |  4 ++--
 drivers/usb/musb/tusb6010.c  |  2 +-
 6 files changed, 38 insertions(+), 18 deletions(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 32c00652e1a2..8e3c14e3afab 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -246,7 +246,7 @@ static u32 musb_default_busctl_offset(u8 epnum, u16 offset)
 	return 0x80 + (0x08 * epnum) + offset;
 }
 
-static u8 musb_default_readb(const void __iomem *addr, unsigned offset)
+static u8 musb_default_readb(void __iomem *addr, unsigned offset)
 {
 	u8 data =  __raw_readb(addr + offset);
 
@@ -260,7 +260,7 @@ static void musb_default_writeb(void __iomem *addr, unsigned offset, u8 data)
 	__raw_writeb(data, addr + offset);
 }
 
-static u16 musb_default_readw(const void __iomem *addr, unsigned offset)
+static u16 musb_default_readw(void __iomem *addr, unsigned offset)
 {
 	u16 data = __raw_readw(addr + offset);
 
@@ -396,19 +396,25 @@ static void musb_default_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 /*
  * Old style IO functions
  */
-u8 (*musb_readb)(const void __iomem *addr, unsigned offset);
+u8 (*musb_readb)(void __iomem *addr, unsigned offset);
 EXPORT_SYMBOL_GPL(musb_readb);
 
 void (*musb_writeb)(void __iomem *addr, unsigned offset, u8 data);
 EXPORT_SYMBOL_GPL(musb_writeb);
 
-u16 (*musb_readw)(const void __iomem *addr, unsigned offset);
+u8 (*musb_clearb)(void __iomem *addr, unsigned int offset);
+EXPORT_SYMBOL_GPL(musb_clearb);
+
+u16 (*musb_readw)(void __iomem *addr, unsigned offset);
 EXPORT_SYMBOL_GPL(musb_readw);
 
 void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data);
 EXPORT_SYMBOL_GPL(musb_writew);
 
-u32 musb_readl(const void __iomem *addr, unsigned offset)
+u16 (*musb_clearw)(void __iomem *addr, unsigned int offset);
+EXPORT_SYMBOL_GPL(musb_clearw);
+
+u32 musb_readl(void __iomem *addr, unsigned offset)
 {
 	u32 data = __raw_readl(addr + offset);
 
@@ -1047,7 +1053,6 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 static void musb_disable_interrupts(struct musb *musb)
 {
 	void __iomem	*mbase = musb->mregs;
-	u16	temp;
 
 	/* disable interrupts */
 	musb_writeb(mbase, MUSB_INTRUSBE, 0);
@@ -1057,9 +1062,9 @@ static void musb_disable_interrupts(struct musb *musb)
 	musb_writew(mbase, MUSB_INTRRXE, 0);
 
 	/*  flush pending interrupts */
-	temp = musb_readb(mbase, MUSB_INTRUSB);
-	temp = musb_readw(mbase, MUSB_INTRTX);
-	temp = musb_readw(mbase, MUSB_INTRRX);
+	musb_clearb(mbase, MUSB_INTRUSB);
+	musb_clearw(mbase, MUSB_INTRTX);
+	musb_clearw(mbase, MUSB_INTRRX);
 }
 
 static void musb_enable_interrupts(struct musb *musb)
@@ -2278,10 +2283,19 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 		musb_readb = musb->ops->readb;
 	if (musb->ops->writeb)
 		musb_writeb = musb->ops->writeb;
+	if (musb->ops->clearb)
+		musb_clearb = musb->ops->clearb;
+	else
+		musb_clearb = musb_readb;
+
 	if (musb->ops->readw)
 		musb_readw = musb->ops->readw;
 	if (musb->ops->writew)
 		musb_writew = musb->ops->writew;
+	if (musb->ops->clearw)
+		musb_clearw = musb->ops->clearw;
+	else
+		musb_clearw = musb_readw;
 
 #ifndef CONFIG_MUSB_PIO_ONLY
 	if (!musb->ops->dma_init || !musb->ops->dma_exit) {
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 9f5a69c2d73b..0d9a35fe82d5 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -120,8 +120,10 @@ struct musb_io;
  * @fifo_offset: returns the fifo offset
  * @readb:	read 8 bits
  * @writeb:	write 8 bits
+ * @clearb:	could be clear-on-readb or W1C
  * @readw:	read 16 bits
  * @writew:	write 16 bits
+ * @clearw:	could be clear-on-readw or W1C
  * @read_fifo:	reads the fifo
  * @write_fifo:	writes to fifo
  * @get_toggle:	platform specific get toggle function
@@ -164,10 +166,12 @@ struct musb_platform_ops {
 	u16	fifo_mode;
 	u32	(*fifo_offset)(u8 epnum);
 	u32	(*busctl_offset)(u8 epnum, u16 offset);
-	u8	(*readb)(const void __iomem *addr, unsigned offset);
+	u8	(*readb)(void __iomem *addr, unsigned offset);
 	void	(*writeb)(void __iomem *addr, unsigned offset, u8 data);
-	u16	(*readw)(const void __iomem *addr, unsigned offset);
+	u8	(*clearb)(void __iomem *addr, unsigned int offset);
+	u16	(*readw)(void __iomem *addr, unsigned offset);
 	void	(*writew)(void __iomem *addr, unsigned offset, u16 data);
+	u16	(*clearw)(void __iomem *addr, unsigned int offset);
 	void	(*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf);
 	void	(*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf);
 	u16	(*get_toggle)(struct musb_qh *qh, int is_out);
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index 8179334f405b..7200596a388f 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -37,11 +37,13 @@ struct musb_io {
 };
 
 /* Do not add new entries here, add them the struct musb_io instead */
-extern u8 (*musb_readb)(const void __iomem *addr, unsigned offset);
+extern u8 (*musb_readb)(void __iomem *addr, unsigned offset);
 extern void (*musb_writeb)(void __iomem *addr, unsigned offset, u8 data);
-extern u16 (*musb_readw)(const void __iomem *addr, unsigned offset);
+extern u8 (*musb_clearb)(void __iomem *addr, unsigned int offset);
+extern u16 (*musb_readw)(void __iomem *addr, unsigned offset);
 extern void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data);
-extern u32 musb_readl(const void __iomem *addr, unsigned offset);
+extern u16 (*musb_clearw)(void __iomem *addr, unsigned int offset);
+extern u32 musb_readl(void __iomem *addr, unsigned offset);
 extern void musb_writel(void __iomem *addr, unsigned offset, u32 data);
 
 #endif
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index d549c0b83366..975c61ee4e6a 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -284,7 +284,7 @@ irqreturn_t dma_controller_irq(int irq, void *private_data)
 
 	spin_lock_irqsave(&musb->lock, flags);
 
-	int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
+	int_hsdma = musb_clearb(mbase, MUSB_HSDMA_INTR);
 
 	if (!int_hsdma) {
 		musb_dbg(musb, "spurious DMA irq");
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index 832a41f9ee7d..2c1bbaa832dd 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -407,7 +407,7 @@ static u32 sunxi_musb_busctl_offset(u8 epnum, u16 offset)
 	return SUNXI_MUSB_TXFUNCADDR + offset;
 }
 
-static u8 sunxi_musb_readb(const void __iomem *addr, unsigned offset)
+static u8 sunxi_musb_readb(void __iomem *addr, unsigned offset)
 {
 	struct sunxi_glue *glue;
 
@@ -520,7 +520,7 @@ static void sunxi_musb_writeb(void __iomem *addr, unsigned offset, u8 data)
 		(int)(addr - sunxi_musb->mregs));
 }
 
-static u16 sunxi_musb_readw(const void __iomem *addr, unsigned offset)
+static u16 sunxi_musb_readw(void __iomem *addr, unsigned offset)
 {
 	if (addr == sunxi_musb->mregs) {
 		/* generic control or fifo control reg access */
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 39453287b5c3..cfb94f9467a3 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -142,7 +142,7 @@ static void tusb_ep_select(void __iomem *mbase, u8 epnum)
 /*
  * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
  */
-static u8 tusb_readb(const void __iomem *addr, unsigned offset)
+static u8 tusb_readb(void __iomem *addr, unsigned offset)
 {
 	u16 tmp;
 	u8 val;
-- 
2.24.0

  parent reply	other threads:[~2019-12-11  1:55 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-12-11  1:54 [PATCH v9 0/6] Add MediaTek MUSB Controller Driver min.guo
2019-12-11  1:54 ` [PATCH v9 1/6] dt-bindings: usb: musb: Add support for MediaTek musb controller min.guo
2019-12-13 19:03   ` Rob Herring
2019-12-11  1:54 ` [PATCH v9 2/6] arm: dts: mt2701: Add usb2 device nodes min.guo
2019-12-18 15:39   ` Bin Liu
2020-05-16 17:31   ` Matthias Brugger
2019-12-11  1:54 ` [PATCH v9 3/6] usb: musb: Add get/set toggle hooks min.guo
2019-12-11  1:54 ` [PATCH v9 4/6] usb: musb: Add noirq type of dma create interface min.guo
2019-12-11  1:54 ` min.guo [this message]
2019-12-11  1:54 ` [PATCH v9 6/6] usb: musb: Add support for MediaTek musb controller min.guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191211015446.11477-6-min.guo@mediatek.com \
    --to=min.guo@mediatek.com \
    --cc=b-liu@ti.com \
    --cc=chunfeng.yun@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hdegoede@redhat.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=stern@rowland.harvard.edu \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).