From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>,
Mathias Nyman <mathias.nyman@linux.intel.com>,
stable@vger.kernel.org
Subject: [PATCH 6/6] xhci: make sure interrupts are restored to correct state
Date: Wed, 11 Dec 2019 16:20:07 +0200 [thread overview]
Message-ID: <20191211142007.8847-7-mathias.nyman@linux.intel.com> (raw)
In-Reply-To: <20191211142007.8847-1-mathias.nyman@linux.intel.com>
spin_unlock_irqrestore() might be called with stale flags after
reading port status, possibly restoring interrupts to a incorrect
state.
If a usb2 port just finished resuming while the port status is read
the spin lock will be temporary released and re-acquired in a separate
function. The flags parameter is passed as value instead of a pointer,
not updating flags properly before the final spin_unlock_irqrestore()
is called.
Cc: <stable@vger.kernel.org> # v3.12+
Fixes: 8b3d45705e54 ("usb: Fix xHCI host issues on remote wakeup.")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
---
drivers/usb/host/xhci-hub.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 4b870cd6c575..7a3a29e5e9d2 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -806,7 +806,7 @@ static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status,
static int xhci_handle_usb2_port_link_resume(struct xhci_port *port,
u32 *status, u32 portsc,
- unsigned long flags)
+ unsigned long *flags)
{
struct xhci_bus_state *bus_state;
struct xhci_hcd *xhci;
@@ -860,11 +860,11 @@ static int xhci_handle_usb2_port_link_resume(struct xhci_port *port,
xhci_test_and_clear_bit(xhci, port, PORT_PLC);
xhci_set_link_state(xhci, port, XDEV_U0);
- spin_unlock_irqrestore(&xhci->lock, flags);
+ spin_unlock_irqrestore(&xhci->lock, *flags);
time_left = wait_for_completion_timeout(
&bus_state->rexit_done[wIndex],
msecs_to_jiffies(XHCI_MAX_REXIT_TIMEOUT_MS));
- spin_lock_irqsave(&xhci->lock, flags);
+ spin_lock_irqsave(&xhci->lock, *flags);
if (time_left) {
slot_id = xhci_find_slot_id_by_port(hcd, xhci,
@@ -967,7 +967,7 @@ static void xhci_get_usb3_port_status(struct xhci_port *port, u32 *status,
}
static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status,
- u32 portsc, unsigned long flags)
+ u32 portsc, unsigned long *flags)
{
struct xhci_bus_state *bus_state;
u32 link_state;
@@ -1017,7 +1017,7 @@ static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status,
static u32 xhci_get_port_status(struct usb_hcd *hcd,
struct xhci_bus_state *bus_state,
u16 wIndex, u32 raw_port_status,
- unsigned long flags)
+ unsigned long *flags)
__releases(&xhci->lock)
__acquires(&xhci->lock)
{
@@ -1140,7 +1140,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
}
trace_xhci_get_port_status(wIndex, temp);
status = xhci_get_port_status(hcd, bus_state, wIndex, temp,
- flags);
+ &flags);
if (status == 0xffffffff)
goto error;
--
2.17.1
prev parent reply other threads:[~2019-12-11 14:18 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-12-11 14:20 [PATCH 0/6] xhci fixes for usb-linus Mathias Nyman
2019-12-11 14:20 ` [PATCH 1/6] xhci: Fix memory leak in xhci_add_in_port() Mathias Nyman
2019-12-11 14:20 ` [PATCH 2/6] xhci: fix USB3 device initiated resume race with roothub autosuspend Mathias Nyman
2019-12-11 14:20 ` [PATCH 3/6] usb: xhci: only set D3hot for pci device Mathias Nyman
2019-12-11 14:20 ` [PATCH 4/6] xhci: Increase STS_HALT timeout in xhci_suspend() Mathias Nyman
2019-12-11 14:20 ` [PATCH 5/6] xhci: handle some XHCI_TRUST_TX_LENGTH quirks cases as default behaviour Mathias Nyman
2019-12-11 14:20 ` Mathias Nyman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191211142007.8847-7-mathias.nyman@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).