* [PATCH v2] usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
@ 2020-01-06 15:10 Linus Walleij
2020-01-12 11:54 ` Robert Jarzmik
2020-01-22 9:15 ` Greg Kroah-Hartman
0 siblings, 2 replies; 5+ messages in thread
From: Linus Walleij @ 2020-01-06 15:10 UTC (permalink / raw)
To: Greg Kroah-Hartman, Felipe Balbi
Cc: linux-usb, Linus Walleij, Robert Jarzmik, Daniel Mack,
Haojian Zhuang, Sylwester Nawrocki, Philipp Zabel
Instead of using the legacy GPIO API and keeping track on
polarity inversion semantics in the driver, switch to use
GPIO descriptors for this driver and change all consumers
in the process.
This makes it possible to retire platform data completely:
the only remaining platform data member was "wakeup" which
was intended to make the vbus interrupt wakeup capable,
but was not set by any users and thus remained unused. VBUS
was not waking any devices up. Leave a comment about it so
later developers using the platform can consider setting it
to always enabled so plugging in USB wakes up the platform.
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Acked-by: Felipe Balbi <balbi@kernel.org>
Acked-by: Sylwester Nawrocki <snawrocki@kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Fix a chip label typo in mach-s3c64xx
- Collect the ACKs!
---
arch/arm/mach-pxa/colibri-pxa320.c | 16 ++---
arch/arm/mach-pxa/eseries.c | 40 +++++++-----
arch/arm/mach-pxa/gumstix.c | 18 +++---
arch/arm/mach-pxa/hx4700.c | 22 ++++---
arch/arm/mach-pxa/magician.c | 22 ++++---
arch/arm/mach-pxa/mioa701.c | 15 +++--
arch/arm/mach-pxa/palm27x.c | 34 +++++------
arch/arm/mach-pxa/palmt5.c | 1 -
arch/arm/mach-pxa/palmtc.c | 18 +++---
arch/arm/mach-pxa/palmte2.c | 18 +++---
arch/arm/mach-pxa/palmtx.c | 1 -
arch/arm/mach-pxa/palmz72.c | 1 -
arch/arm/mach-pxa/tosa.c | 18 +++---
arch/arm/mach-pxa/vpac270.c | 15 ++---
arch/arm/mach-s3c64xx/mach-smartq.c | 13 ++--
drivers/usb/phy/phy-gpio-vbus-usb.c | 95 +++++++++++++----------------
include/linux/usb/gpio_vbus.h | 33 ----------
17 files changed, 188 insertions(+), 192 deletions(-)
delete mode 100644 include/linux/usb/gpio_vbus.h
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index eba917d69c0a..35dd3adb7712 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -11,9 +11,9 @@
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
-#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <linux/sizes.h>
@@ -144,17 +144,18 @@ static inline void __init colibri_pxa320_init_eth(void) {}
#endif /* CONFIG_AX88796 */
#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static struct gpio_vbus_mach_info colibri_pxa320_gpio_vbus_info = {
- .gpio_vbus = mfp_to_gpio(MFP_PIN_GPIO96),
- .gpio_pullup = -1,
+static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
+ .dev_id = "gpio-vbus",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", MFP_PIN_GPIO96,
+ "vbus", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
static struct platform_device colibri_pxa320_gpio_vbus = {
.name = "gpio-vbus",
.id = -1,
- .dev = {
- .platform_data = &colibri_pxa320_gpio_vbus_info,
- },
};
static void colibri_pxa320_udc_command(int cmd)
@@ -173,6 +174,7 @@ static struct pxa2xx_udc_mach_info colibri_pxa320_udc_info __initdata = {
static void __init colibri_pxa320_init_udc(void)
{
pxa_set_udc_info(&colibri_pxa320_udc_info);
+ gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
platform_device_register(&colibri_pxa320_gpio_vbus);
}
#else
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index 91f7c3e40065..f37c44b6139d 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -14,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk-provider.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/platform_device.h>
@@ -22,7 +23,6 @@
#include <linux/mfd/t7l66xb.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
-#include <linux/usb/gpio_vbus.h>
#include <linux/memblock.h>
#include <video/w100fb.h>
@@ -51,18 +51,20 @@ void __init eseries_fixup(struct tag *tags, char **cmdline)
memblock_add(0xa0000000, SZ_64M);
}
-struct gpio_vbus_mach_info e7xx_udc_info = {
- .gpio_vbus = GPIO_E7XX_USB_DISC,
- .gpio_pullup = GPIO_E7XX_USB_PULLUP,
- .gpio_pullup_inverted = 1
+static struct gpiod_lookup_table e7xx_gpio_vbus_gpiod_table __maybe_unused = {
+ .dev_id = "gpio-vbus",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_DISC,
+ "vbus", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO_E7XX_USB_PULLUP,
+ "pullup", GPIO_ACTIVE_LOW),
+ { },
+ },
};
static struct platform_device e7xx_gpio_vbus __maybe_unused = {
.name = "gpio-vbus",
.id = -1,
- .dev = {
- .platform_data = &e7xx_udc_info,
- },
};
struct pxaficp_platform_data e7xx_ficp_platform_data = {
@@ -165,6 +167,7 @@ static void __init e330_init(void)
pxa_set_stuart_info(NULL);
eseries_register_clks();
eseries_get_tmio_gpios();
+ gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
platform_add_devices(ARRAY_AND_SIZE(e330_devices));
}
@@ -216,6 +219,7 @@ static void __init e350_init(void)
pxa_set_stuart_info(NULL);
eseries_register_clks();
eseries_get_tmio_gpios();
+ gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
platform_add_devices(ARRAY_AND_SIZE(e350_devices));
}
@@ -340,6 +344,7 @@ static void __init e400_init(void)
eseries_register_clks();
eseries_get_tmio_gpios();
pxa_set_fb_info(NULL, &e400_pxafb_mach_info);
+ gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
platform_add_devices(ARRAY_AND_SIZE(e400_devices));
}
@@ -534,6 +539,7 @@ static void __init e740_init(void)
clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
"UDCCLK", &pxa25x_device_udc.dev),
eseries_get_tmio_gpios();
+ gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
platform_add_devices(ARRAY_AND_SIZE(e740_devices));
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&e7xx_ficp_platform_data);
@@ -733,6 +739,7 @@ static void __init e750_init(void)
clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
+ gpiod_add_lookup_table(&e7xx_gpio_vbus_gpiod_table);
platform_add_devices(ARRAY_AND_SIZE(e750_devices));
pxa_set_ac97_info(NULL);
pxa_set_ficp_info(&e7xx_ficp_platform_data);
@@ -888,18 +895,20 @@ static struct platform_device e800_fb_device = {
/* --------------------------- UDC definitions --------------------------- */
-static struct gpio_vbus_mach_info e800_udc_info = {
- .gpio_vbus = GPIO_E800_USB_DISC,
- .gpio_pullup = GPIO_E800_USB_PULLUP,
- .gpio_pullup_inverted = 1
+static struct gpiod_lookup_table e800_gpio_vbus_gpiod_table = {
+ .dev_id = "gpio-vbus",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_DISC,
+ "vbus", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO_E800_USB_PULLUP,
+ "pullup", GPIO_ACTIVE_LOW),
+ { },
+ },
};
static struct platform_device e800_gpio_vbus = {
.name = "gpio-vbus",
.id = -1,
- .dev = {
- .platform_data = &e800_udc_info,
- },
};
@@ -949,6 +958,7 @@ static void __init e800_init(void)
clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
"GPIO11_CLK", NULL),
eseries_get_tmio_gpios();
+ gpiod_add_lookup_table(&e800_gpio_vbus_gpiod_table);
platform_add_devices(ARRAY_AND_SIZE(e800_devices));
pxa_set_ac97_info(NULL);
}
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 4b4589cf431f..49dd618b10f7 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -20,10 +20,10 @@
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/err.h>
#include <linux/clk.h>
-#include <linux/usb/gpio_vbus.h>
#include <asm/setup.h>
#include <asm/memory.h>
@@ -101,21 +101,25 @@ static void __init gumstix_mmc_init(void)
#endif
#ifdef CONFIG_USB_PXA25X
-static struct gpio_vbus_mach_info gumstix_udc_info = {
- .gpio_vbus = GPIO_GUMSTIX_USB_GPIOn,
- .gpio_pullup = GPIO_GUMSTIX_USB_GPIOx,
+static struct gpiod_lookup_table gumstix_gpio_vbus_gpiod_table = {
+ .dev_id = "gpio-vbus",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_GUMSTIX_USB_GPIOn,
+ "vbus", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO_GUMSTIX_USB_GPIOx,
+ "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
static struct platform_device gumstix_gpio_vbus = {
.name = "gpio-vbus",
.id = -1,
- .dev = {
- .platform_data = &gumstix_udc_info,
- },
};
static void __init gumstix_udc_init(void)
{
+ gpiod_add_lookup_table(&gumstix_gpio_vbus_gpiod_table);
platform_device_register(&gumstix_gpio_vbus);
}
#else
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 311268d186ab..238a751a8797 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -34,7 +34,6 @@
#include <linux/spi/ads7846.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
-#include <linux/usb/gpio_vbus.h>
#include <linux/platform_data/i2c-pxa.h>
#include <mach/hardware.h>
@@ -578,18 +577,24 @@ static struct pwm_lookup hx4700_pwm_lookup[] = {
* USB "Transceiver"
*/
-static struct gpio_vbus_mach_info gpio_vbus_info = {
- .gpio_pullup = GPIO76_HX4700_USBC_PUEN,
- .gpio_vbus = GPIOD14_nUSBC_DETECT,
- .gpio_vbus_inverted = 1,
+static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
+ .dev_id = "gpio-vbus",
+ .table = {
+ /* This GPIO is on ASIC3 */
+ GPIO_LOOKUP("asic3",
+ /* Convert to a local offset on the ASIC3 */
+ GPIOD14_nUSBC_DETECT - HX4700_ASIC3_GPIO_BASE,
+ "vbus", GPIO_ACTIVE_LOW),
+ /* This one is on the primary SOC GPIO */
+ GPIO_LOOKUP("gpio-pxa", GPIO76_HX4700_USBC_PUEN,
+ "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
static struct platform_device gpio_vbus = {
.name = "gpio-vbus",
.id = -1,
- .dev = {
- .platform_data = &gpio_vbus_info,
- },
};
static struct pxa2xx_udc_mach_info hx4700_udc_info;
@@ -883,6 +888,7 @@ static void __init hx4700_init(void)
pxa_set_stuart_info(NULL);
gpiod_add_lookup_table(&bq24022_gpiod_table);
+ gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
platform_add_devices(devices, ARRAY_SIZE(devices));
pwm_add_table(hx4700_pwm_lookup, ARRAY_SIZE(hx4700_pwm_lookup));
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index e1a394ac3eea..5a1976e431e7 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -27,7 +27,6 @@
#include <linux/regulator/fixed.h>
#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
-#include <linux/usb/gpio_vbus.h>
#include <linux/platform_data/i2c-pxa.h>
#include <mach/hardware.h>
@@ -506,9 +505,20 @@ static struct resource gpio_vbus_resource = {
.end = IRQ_MAGICIAN_VBUS,
};
-static struct gpio_vbus_mach_info gpio_vbus_info = {
- .gpio_pullup = GPIO27_MAGICIAN_USBC_PUEN,
- .gpio_vbus = EGPIO_MAGICIAN_CABLE_VBUS,
+static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
+ .dev_id = "gpio-vbus",
+ .table = {
+ /*
+ * EGPIO on register 4 index 1, the second EGPIO chip
+ * starts at register 4 so this will be at index 1 on that
+ * chip.
+ */
+ GPIO_LOOKUP("htc-egpio-1", 1,
+ "vbus", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", GPIO27_MAGICIAN_USBC_PUEN,
+ "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
static struct platform_device gpio_vbus = {
@@ -516,9 +526,6 @@ static struct platform_device gpio_vbus = {
.id = -1,
.num_resources = 1,
.resource = &gpio_vbus_resource,
- .dev = {
- .platform_data = &gpio_vbus_info,
- },
};
/*
@@ -1032,6 +1039,7 @@ static void __init magician_init(void)
ARRAY_SIZE(pwm_backlight_supply), 5000000);
gpiod_add_lookup_table(&bq24022_gpiod_table);
+ gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
platform_add_devices(ARRAY_AND_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index c360023a989c..0b8bae9610f1 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -24,7 +24,6 @@
#include <linux/power_supply.h>
#include <linux/wm97xx.h>
#include <linux/mtd/physmap.h>
-#include <linux/usb/gpio_vbus.h>
#include <linux/reboot.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/max1586.h>
@@ -368,10 +367,13 @@ static struct pxa2xx_udc_mach_info mioa701_udc_info = {
.gpio_pullup = GPIO22_USB_ENABLE,
};
-struct gpio_vbus_mach_info gpio_vbus_data = {
- .gpio_vbus = GPIO13_nUSB_DETECT,
- .gpio_vbus_inverted = 1,
- .gpio_pullup = -1,
+static struct gpiod_lookup_table gpio_vbus_gpiod_table = {
+ .dev_id = "gpio-vbus",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO13_nUSB_DETECT,
+ "vbus", GPIO_ACTIVE_LOW),
+ { },
+ },
};
/*
@@ -677,7 +679,7 @@ MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info)
MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL)
MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL)
MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL)
-MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data);
+MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", NULL);
static struct platform_device *devices[] __initdata = {
&mioa701_gpio_keys,
@@ -750,6 +752,7 @@ static void __init mioa701_machine_init(void)
pxa_set_ac97_info(&mioa701_ac97_info);
pm_power_off = mioa701_poweroff;
pwm_add_table(mioa701_pwm_lookup, ARRAY_SIZE(mioa701_pwm_lookup));
+ gpiod_add_lookup_table(&gpio_vbus_gpiod_table);
platform_add_devices(devices, ARRAY_SIZE(devices));
gsm_init();
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 3ad0b3915ae1..b600b63af3a6 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -13,10 +13,10 @@
#include <linux/pda_power.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
+#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/wm97xx.h>
#include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
#include <linux/regulator/max1586.h>
#include <linux/platform_data/i2c-pxa.h>
@@ -159,32 +159,32 @@ void __init palm27x_lcd_init(int power, struct pxafb_mode_info *mode)
******************************************************************************/
#if defined(CONFIG_USB_PXA27X) || \
defined(CONFIG_USB_PXA27X_MODULE)
-static struct gpio_vbus_mach_info palm27x_udc_info = {
- .gpio_vbus_inverted = 1,
+
+/* The actual GPIO offsets get filled in in the palm27x_udc_init() call */
+static struct gpiod_lookup_table palm27x_udc_gpiod_table = {
+ .dev_id = "gpio-vbus",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", 0,
+ "vbus", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio-pxa", 0,
+ "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
static struct platform_device palm27x_gpio_vbus = {
.name = "gpio-vbus",
.id = -1,
- .dev = {
- .platform_data = &palm27x_udc_info,
- },
};
void __init palm27x_udc_init(int vbus, int pullup, int vbus_inverted)
{
- palm27x_udc_info.gpio_vbus = vbus;
- palm27x_udc_info.gpio_pullup = pullup;
-
- palm27x_udc_info.gpio_vbus_inverted = vbus_inverted;
-
- if (!gpio_request(pullup, "USB Pullup")) {
- gpio_direction_output(pullup,
- palm27x_udc_info.gpio_vbus_inverted);
- gpio_free(pullup);
- } else
- return;
+ palm27x_udc_gpiod_table.table[0].chip_hwnum = vbus;
+ palm27x_udc_gpiod_table.table[1].chip_hwnum = pullup;
+ if (vbus_inverted)
+ palm27x_udc_gpiod_table.table[0].flags = GPIO_ACTIVE_LOW;
+ gpiod_add_lookup_table(&palm27x_udc_gpiod_table);
platform_device_register(&palm27x_gpio_vbus);
}
#endif
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 902403367786..7c7cbb4e677e 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -23,7 +23,6 @@
#include <linux/gpio.h>
#include <linux/wm97xx.h>
#include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index f52bd155e825..fda9deaaae02 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -23,7 +23,6 @@
#include <linux/power_supply.h>
#include <linux/gpio_keys.h>
#include <linux/mtd/physmap.h>
-#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -319,22 +318,25 @@ static inline void palmtc_mkp_init(void) {}
* UDC
******************************************************************************/
#if defined(CONFIG_USB_PXA25X)||defined(CONFIG_USB_PXA25X_MODULE)
-static struct gpio_vbus_mach_info palmtc_udc_info = {
- .gpio_vbus = GPIO_NR_PALMTC_USB_DETECT_N,
- .gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_PALMTC_USB_POWER,
+static struct gpiod_lookup_table palmtc_udc_gpiod_table = {
+ .dev_id = "gpio-vbus",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_USB_DETECT_N,
+ "vbus", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTC_USB_POWER,
+ "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
static struct platform_device palmtc_gpio_vbus = {
.name = "gpio-vbus",
.id = -1,
- .dev = {
- .platform_data = &palmtc_udc_info,
- },
};
static void __init palmtc_udc_init(void)
{
+ gpiod_add_lookup_table(&palmtc_udc_gpiod_table);
platform_device_register(&palmtc_gpio_vbus);
};
#else
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index a92b9665f425..7171014fd311 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -23,7 +23,6 @@
#include <linux/gpio.h>
#include <linux/wm97xx.h>
#include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -201,18 +200,20 @@ static struct pxaficp_platform_data palmte2_ficp_platform_data = {
/******************************************************************************
* UDC
******************************************************************************/
-static struct gpio_vbus_mach_info palmte2_udc_info = {
- .gpio_vbus = GPIO_NR_PALMTE2_USB_DETECT_N,
- .gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_PALMTE2_USB_PULLUP,
+static struct gpiod_lookup_table palmte2_udc_gpiod_table = {
+ .dev_id = "gpio-vbus",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_USB_DETECT_N,
+ "vbus", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", GPIO_NR_PALMTE2_USB_PULLUP,
+ "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
static struct platform_device palmte2_gpio_vbus = {
.name = "gpio-vbus",
.id = -1,
- .dev = {
- .platform_data = &palmte2_udc_info,
- },
};
/******************************************************************************
@@ -368,6 +369,7 @@ static void __init palmte2_init(void)
pxa_set_ficp_info(&palmte2_ficp_platform_data);
pwm_add_table(palmte2_pwm_lookup, ARRAY_SIZE(palmte2_pwm_lookup));
+ gpiod_add_lookup_table(&palmte2_udc_gpiod_table);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 926593ecf1c9..07332c92c9f7 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -23,7 +23,6 @@
#include <linux/gpio.h>
#include <linux/wm97xx.h>
#include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
#include <linux/mtd/platnand.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/physmap.h>
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index 77fe2e367324..4df443943579 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -25,7 +25,6 @@
#include <linux/gpio.h>
#include <linux/wm97xx.h>
#include <linux/power_supply.h>
-#include <linux/usb/gpio_vbus.h>
#include <linux/platform_data/i2c-gpio.h>
#include <linux/gpio/machine.h>
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 4e13893edeb9..3d2c108e911e 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -33,7 +33,6 @@
#include <linux/spi/pxa2xx_spi.h>
#include <linux/input/matrix_keypad.h>
#include <linux/platform_data/i2c-pxa.h>
-#include <linux/usb/gpio_vbus.h>
#include <linux/reboot.h>
#include <linux/memblock.h>
@@ -240,18 +239,20 @@ static struct scoop_pcmcia_config tosa_pcmcia_config = {
/*
* USB Device Controller
*/
-static struct gpio_vbus_mach_info tosa_udc_info = {
- .gpio_pullup = TOSA_GPIO_USB_PULLUP,
- .gpio_vbus = TOSA_GPIO_USB_IN,
- .gpio_vbus_inverted = 1,
+static struct gpiod_lookup_table tosa_udc_gpiod_table = {
+ .dev_id = "gpio-vbus",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_USB_IN,
+ "vbus", GPIO_ACTIVE_LOW),
+ GPIO_LOOKUP("gpio-pxa", TOSA_GPIO_USB_PULLUP,
+ "pullup", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
static struct platform_device tosa_gpio_vbus = {
.name = "gpio-vbus",
.id = -1,
- .dev = {
- .platform_data = &tosa_udc_info,
- },
};
/*
@@ -949,6 +950,7 @@ static void __init tosa_init(void)
clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
+ gpiod_add_lookup_table(&tosa_udc_gpiod_table);
platform_add_devices(devices, ARRAY_SIZE(devices));
}
diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c
index 26a5ebc00069..14505e83479e 100644
--- a/arch/arm/mach-pxa/vpac270.c
+++ b/arch/arm/mach-pxa/vpac270.c
@@ -14,7 +14,6 @@
#include <linux/leds.h>
#include <linux/gpio.h>
#include <linux/gpio/machine.h>
-#include <linux/usb/gpio_vbus.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
@@ -352,17 +351,18 @@ static inline void vpac270_uhc_init(void) {}
* USB Gadget
******************************************************************************/
#if defined(CONFIG_USB_PXA27X)||defined(CONFIG_USB_PXA27X_MODULE)
-static struct gpio_vbus_mach_info vpac270_gpio_vbus_info = {
- .gpio_vbus = GPIO41_VPAC270_UDC_DETECT,
- .gpio_pullup = -1,
+static struct gpiod_lookup_table vpac270_gpio_vbus_gpiod_table = {
+ .dev_id = "gpio-vbus",
+ .table = {
+ GPIO_LOOKUP("gpio-pxa", GPIO41_VPAC270_UDC_DETECT,
+ "vbus", GPIO_ACTIVE_HIGH),
+ { },
+ },
};
static struct platform_device vpac270_gpio_vbus = {
.name = "gpio-vbus",
.id = -1,
- .dev = {
- .platform_data = &vpac270_gpio_vbus_info,
- },
};
static void vpac270_udc_command(int cmd)
@@ -381,6 +381,7 @@ static struct pxa2xx_udc_mach_info vpac270_udc_info __initdata = {
static void __init vpac270_udc_init(void)
{
pxa_set_udc_info(&vpac270_udc_info);
+ gpiod_add_lookup_table(&vpac270_gpio_vbus_gpiod_table);
platform_device_register(&vpac270_gpio_vbus);
}
#else
diff --git a/arch/arm/mach-s3c64xx/mach-smartq.c b/arch/arm/mach-s3c64xx/mach-smartq.c
index 951208f168e7..829d5dbd69ee 100644
--- a/arch/arm/mach-s3c64xx/mach-smartq.c
+++ b/arch/arm/mach-s3c64xx/mach-smartq.c
@@ -13,7 +13,6 @@
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/spi/spi_gpio.h>
-#include <linux/usb/gpio_vbus.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <asm/mach-types.h>
@@ -124,15 +123,16 @@ static struct s3c2410_hcd_info smartq_usb_host_info = {
.enable_oc = smartq_usb_host_enableoc,
};
-static struct gpio_vbus_mach_info smartq_usb_otg_vbus_pdata = {
- .gpio_vbus = S3C64XX_GPL(9),
- .gpio_pullup = -1,
- .gpio_vbus_inverted = true,
+static struct gpiod_lookup_table smartq_usb_otg_vbus_gpiod_table = {
+ .dev_id = "gpio-vbus",
+ .table = {
+ GPIO_LOOKUP("GPL", 9, "vbus", GPIO_ACTIVE_LOW),
+ { },
+ },
};
static struct platform_device smartq_usb_otg_vbus_dev = {
.name = "gpio-vbus",
- .dev.platform_data = &smartq_usb_otg_vbus_pdata,
};
static struct pwm_lookup smartq_pwm_lookup[] = {
@@ -418,6 +418,7 @@ void __init smartq_machine_init(void)
pwm_add_table(smartq_pwm_lookup, ARRAY_SIZE(smartq_pwm_lookup));
gpiod_add_lookup_table(&smartq_lcd_control_gpiod_table);
+ gpiod_add_lookup_table(&smartq_usb_otg_vbus_gpiod_table);
platform_add_devices(smartq_devices, ARRAY_SIZE(smartq_devices));
gpiod_add_lookup_table(&smartq_audio_gpios);
diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c
index 553e2573c74f..05c5173d560b 100644
--- a/drivers/usb/phy/phy-gpio-vbus-usb.c
+++ b/drivers/usb/phy/phy-gpio-vbus-usb.c
@@ -7,7 +7,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
@@ -17,7 +17,6 @@
#include <linux/regulator/consumer.h>
#include <linux/usb/gadget.h>
-#include <linux/usb/gpio_vbus.h>
#include <linux/usb/otg.h>
@@ -29,6 +28,8 @@
* Needs to be loaded before the UDC driver that will use it.
*/
struct gpio_vbus_data {
+ struct gpio_desc *vbus_gpiod;
+ struct gpio_desc *pullup_gpiod;
struct usb_phy phy;
struct device *dev;
struct regulator *vbus_draw;
@@ -83,38 +84,30 @@ static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA)
gpio_vbus->mA = mA;
}
-static int is_vbus_powered(struct gpio_vbus_mach_info *pdata)
+static int is_vbus_powered(struct gpio_vbus_data *gpio_vbus)
{
- int vbus;
-
- vbus = gpio_get_value(pdata->gpio_vbus);
- if (pdata->gpio_vbus_inverted)
- vbus = !vbus;
-
- return vbus;
+ return gpiod_get_value(gpio_vbus->vbus_gpiod);
}
static void gpio_vbus_work(struct work_struct *work)
{
struct gpio_vbus_data *gpio_vbus =
container_of(work, struct gpio_vbus_data, work.work);
- struct gpio_vbus_mach_info *pdata = dev_get_platdata(gpio_vbus->dev);
- int gpio, status, vbus;
+ int status, vbus;
if (!gpio_vbus->phy.otg->gadget)
return;
- vbus = is_vbus_powered(pdata);
+ vbus = is_vbus_powered(gpio_vbus);
if ((vbus ^ gpio_vbus->vbus) == 0)
return;
gpio_vbus->vbus = vbus;
/* Peripheral controllers which manage the pullup themselves won't have
- * gpio_pullup configured here. If it's configured here, we'll do what
- * isp1301_omap::b_peripheral() does and enable the pullup here... although
- * that may complicate usb_gadget_{,dis}connect() support.
+ * a pullup GPIO configured here. If it's configured here, we'll do
+ * what isp1301_omap::b_peripheral() does and enable the pullup here...
+ * although that may complicate usb_gadget_{,dis}connect() support.
*/
- gpio = pdata->gpio_pullup;
if (vbus) {
status = USB_EVENT_VBUS;
@@ -126,16 +119,16 @@ static void gpio_vbus_work(struct work_struct *work)
set_vbus_draw(gpio_vbus, 100);
/* optionally enable D+ pullup */
- if (gpio_is_valid(gpio))
- gpio_set_value(gpio, !pdata->gpio_pullup_inverted);
+ if (gpio_vbus->pullup_gpiod)
+ gpiod_set_value(gpio_vbus->pullup_gpiod, 1);
atomic_notifier_call_chain(&gpio_vbus->phy.notifier,
status, gpio_vbus->phy.otg->gadget);
usb_phy_set_event(&gpio_vbus->phy, USB_EVENT_ENUMERATED);
} else {
/* optionally disable D+ pullup */
- if (gpio_is_valid(gpio))
- gpio_set_value(gpio, pdata->gpio_pullup_inverted);
+ if (gpio_vbus->pullup_gpiod)
+ gpiod_set_value(gpio_vbus->pullup_gpiod, 0);
set_vbus_draw(gpio_vbus, 0);
@@ -154,12 +147,11 @@ static void gpio_vbus_work(struct work_struct *work)
static irqreturn_t gpio_vbus_irq(int irq, void *data)
{
struct platform_device *pdev = data;
- struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev);
struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev);
struct usb_otg *otg = gpio_vbus->phy.otg;
dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n",
- is_vbus_powered(pdata) ? "supplied" : "inactive",
+ is_vbus_powered(gpio_vbus) ? "supplied" : "inactive",
otg->gadget ? otg->gadget->name : "none");
if (otg->gadget)
@@ -175,22 +167,18 @@ static int gpio_vbus_set_peripheral(struct usb_otg *otg,
struct usb_gadget *gadget)
{
struct gpio_vbus_data *gpio_vbus;
- struct gpio_vbus_mach_info *pdata;
struct platform_device *pdev;
- int gpio;
gpio_vbus = container_of(otg->usb_phy, struct gpio_vbus_data, phy);
pdev = to_platform_device(gpio_vbus->dev);
- pdata = dev_get_platdata(gpio_vbus->dev);
- gpio = pdata->gpio_pullup;
if (!gadget) {
dev_dbg(&pdev->dev, "unregistering gadget '%s'\n",
otg->gadget->name);
/* optionally disable D+ pullup */
- if (gpio_is_valid(gpio))
- gpio_set_value(gpio, pdata->gpio_pullup_inverted);
+ if (gpio_vbus->pullup_gpiod)
+ gpiod_set_value(gpio_vbus->pullup_gpiod, 0);
set_vbus_draw(gpio_vbus, 0);
@@ -242,16 +230,13 @@ static int gpio_vbus_set_suspend(struct usb_phy *phy, int suspend)
static int gpio_vbus_probe(struct platform_device *pdev)
{
- struct gpio_vbus_mach_info *pdata = dev_get_platdata(&pdev->dev);
struct gpio_vbus_data *gpio_vbus;
struct resource *res;
+ struct gpio_desc *gpiod;
+ struct device *dev = &pdev->dev;
int err, gpio, irq;
unsigned long irqflags;
- if (!pdata || !gpio_is_valid(pdata->gpio_vbus))
- return -EINVAL;
- gpio = pdata->gpio_vbus;
-
gpio_vbus = devm_kzalloc(&pdev->dev, sizeof(struct gpio_vbus_data),
GFP_KERNEL);
if (!gpio_vbus)
@@ -273,37 +258,43 @@ static int gpio_vbus_probe(struct platform_device *pdev)
gpio_vbus->phy.otg->usb_phy = &gpio_vbus->phy;
gpio_vbus->phy.otg->set_peripheral = gpio_vbus_set_peripheral;
- err = devm_gpio_request(&pdev->dev, gpio, "vbus_detect");
- if (err) {
- dev_err(&pdev->dev, "can't request vbus gpio %d, err: %d\n",
- gpio, err);
+ /* Look up the VBUS sensing GPIO */
+ gpio_vbus->vbus_gpiod = devm_gpiod_get(dev, "vbus", GPIOD_IN);
+ if (IS_ERR(gpio_vbus->vbus_gpiod)) {
+ err = PTR_ERR(gpio_vbus->vbus_gpiod);
+ dev_err(&pdev->dev, "can't request vbus gpio, err: %d\n", err);
return err;
}
- gpio_direction_input(gpio);
+ gpiod_set_consumer_name(gpio_vbus->vbus_gpiod, "vbus_detect");
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res) {
irq = res->start;
irqflags = (res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED;
} else {
- irq = gpio_to_irq(gpio);
+ irq = gpiod_to_irq(gpio_vbus->vbus_gpiod);
irqflags = VBUS_IRQ_FLAGS;
}
gpio_vbus->irq = irq;
- /* if data line pullup is in use, initialize it to "not pulling up" */
- gpio = pdata->gpio_pullup;
- if (gpio_is_valid(gpio)) {
- err = devm_gpio_request(&pdev->dev, gpio, "udc_pullup");
- if (err) {
- dev_err(&pdev->dev,
- "can't request pullup gpio %d, err: %d\n",
- gpio, err);
- return err;
- }
- gpio_direction_output(gpio, pdata->gpio_pullup_inverted);
+ /*
+ * The VBUS sensing GPIO should have a pulldown, which will normally be
+ * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a
+ * value the GPIO detects as active. Some systems will use comparators.
+ * Get the optional D+ or D- pullup GPIO. If the data line pullup is
+ * in use, initialize it to "not pulling up"
+ */
+ gpio_vbus->pullup_gpiod = devm_gpiod_get_optional(dev, "pullup",
+ GPIOD_OUT_LOW);
+ if (IS_ERR(gpio_vbus->pullup_gpiod)) {
+ err = PTR_ERR(gpio_vbus->pullup_gpiod);
+ dev_err(&pdev->dev, "can't request pullup gpio, err: %d\n",
+ err);
+ return err;
}
+ if (gpio_vbus->pullup_gpiod)
+ gpiod_set_consumer_name(gpio_vbus->pullup_gpiod, "udc_pullup");
err = devm_request_irq(&pdev->dev, irq, gpio_vbus_irq, irqflags,
"vbus_detect", pdev);
@@ -330,7 +321,7 @@ static int gpio_vbus_probe(struct platform_device *pdev)
return err;
}
- device_init_wakeup(&pdev->dev, pdata->wakeup);
+ /* TODO: wakeup could be enabled here with device_init_wakeup(dev, 1) */
return 0;
}
diff --git a/include/linux/usb/gpio_vbus.h b/include/linux/usb/gpio_vbus.h
deleted file mode 100644
index 804fb06cf6d6..000000000000
--- a/include/linux/usb/gpio_vbus.h
+++ /dev/null
@@ -1,33 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * A simple GPIO VBUS sensing driver for B peripheral only devices
- * with internal transceivers.
- * Optionally D+ pullup can be controlled by a second GPIO.
- *
- * Copyright (c) 2008 Philipp Zabel <philipp.zabel@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-/**
- * struct gpio_vbus_mach_info - configuration for gpio_vbus
- * @gpio_vbus: VBUS sensing GPIO
- * @gpio_pullup: optional D+ or D- pullup GPIO (else negative/invalid)
- * @gpio_vbus_inverted: true if gpio_vbus is active low
- * @gpio_pullup_inverted: true if gpio_pullup is active low
- * @wakeup: configure gpio_vbus as a wake-up source
- *
- * The VBUS sensing GPIO should have a pulldown, which will normally be
- * part of a resistor ladder turning a 4.0V-5.25V level on VBUS into a
- * value the GPIO detects as active. Some systems will use comparators.
- */
-struct gpio_vbus_mach_info {
- int gpio_vbus;
- int gpio_pullup;
- bool gpio_vbus_inverted;
- bool gpio_pullup_inverted;
- bool wakeup;
-};
--
2.23.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v2] usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
2020-01-06 15:10 [PATCH v2] usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors Linus Walleij
@ 2020-01-12 11:54 ` Robert Jarzmik
2020-01-14 0:29 ` Linus Walleij
2020-01-22 9:15 ` Greg Kroah-Hartman
1 sibling, 1 reply; 5+ messages in thread
From: Robert Jarzmik @ 2020-01-12 11:54 UTC (permalink / raw)
To: Linus Walleij
Cc: Greg Kroah-Hartman, Felipe Balbi, linux-usb, Daniel Mack,
Haojian Zhuang, Sylwester Nawrocki, Philipp Zabel
Linus Walleij <linus.walleij@linaro.org> writes:
> Instead of using the legacy GPIO API and keeping track on
> polarity inversion semantics in the driver, switch to use
> GPIO descriptors for this driver and change all consumers
> in the process.
>
> This makes it possible to retire platform data completely:
> the only remaining platform data member was "wakeup" which
> was intended to make the vbus interrupt wakeup capable,
> but was not set by any users and thus remained unused. VBUS
> was not waking any devices up. Leave a comment about it so
> later developers using the platform can consider setting it
> to always enabled so plugging in USB wakes up the platform.
>
> Cc: Robert Jarzmik <robert.jarzmik@free.fr>
> Cc: Daniel Mack <daniel@zonque.org>
> Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
> Acked-by: Felipe Balbi <balbi@kernel.org>
> Acked-by: Sylwester Nawrocki <snawrocki@kernel.org>
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
> ChangeLog v1->v2:
> - Fix a chip label typo in mach-s3c64xx
> - Collect the ACKs!
Hi Linus,
Throughout this patch, if I get it right, you suppose that :
- the gpio_request() for the vbus is called as gpio_request(xx, gpio, "vbus")
- the gpio_request() for the pullup is called as gpio_request(xx, gpio, "pullup")
My understanding from drivers/usb/phy/phy-gpio-vbus-usb.c is that these name are
:
- "vbus_detect"
- "udc_pullup"
Have I missed something ?
Cheers.
--
Robert
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
2020-01-12 11:54 ` Robert Jarzmik
@ 2020-01-14 0:29 ` Linus Walleij
2020-01-18 22:00 ` Robert Jarzmik
0 siblings, 1 reply; 5+ messages in thread
From: Linus Walleij @ 2020-01-14 0:29 UTC (permalink / raw)
To: Robert Jarzmik
Cc: Greg Kroah-Hartman, Felipe Balbi, linux-usb, Daniel Mack,
Haojian Zhuang, Sylwester Nawrocki, Philipp Zabel
On Sun, Jan 12, 2020 at 12:54 PM Robert Jarzmik <robert.jarzmik@free.fr> wrote:
> Linus Walleij <linus.walleij@linaro.org> writes:
> Hi Linus,
>
> Throughout this patch, if I get it right, you suppose that :
> - the gpio_request() for the vbus is called as gpio_request(xx, gpio, "vbus")
> - the gpio_request() for the pullup is called as gpio_request(xx, gpio, "pullup")
>
> My understanding from drivers/usb/phy/phy-gpio-vbus-usb.c is that these name are
> :
> - "vbus_detect"
> - "udc_pullup"
>
> Have I missed something ?
There are two names. The lookup name that I just invented to be
"vbus" and "pullup". One reason to choose these names is that
if someone migrates the platforms to device tree they can name
the DT property vbus-gpios = <...>; pullup-gpios = <...>;
which I think makes sense.
Then there is the consumer name that is shown in debugfs etc.
That is preserved with these calls:
+ gpiod_set_consumer_name(gpio_vbus->vbus_gpiod, "vbus_detect");
(...)
+ if (gpio_vbus->pullup_gpiod)
+ gpiod_set_consumer_name(gpio_vbus->pullup_gpiod, "udc_pullup");
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
2020-01-14 0:29 ` Linus Walleij
@ 2020-01-18 22:00 ` Robert Jarzmik
0 siblings, 0 replies; 5+ messages in thread
From: Robert Jarzmik @ 2020-01-18 22:00 UTC (permalink / raw)
To: Linus Walleij
Cc: Greg Kroah-Hartman, Felipe Balbi, linux-usb, Daniel Mack,
Haojian Zhuang, Sylwester Nawrocki, Philipp Zabel
Linus Walleij <linus.walleij@linaro.org> writes:
> On Sun, Jan 12, 2020 at 12:54 PM Robert Jarzmik <robert.jarzmik@free.fr> wrote:
> There are two names. The lookup name that I just invented to be
> "vbus" and "pullup". One reason to choose these names is that
> if someone migrates the platforms to device tree they can name
> the DT property vbus-gpios = <...>; pullup-gpios = <...>;
> which I think makes sense.
>
> Then there is the consumer name that is shown in debugfs etc.
>
> That is preserved with these calls:
>
> + gpiod_set_consumer_name(gpio_vbus->vbus_gpiod, "vbus_detect");
> (...)
> + if (gpio_vbus->pullup_gpiod)
> + gpiod_set_consumer_name(gpio_vbus->pullup_gpiod, "udc_pullup");
Ah yes, I see it now.
For the mach-pxa part :
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cheers.
--
Robert
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v2] usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors
2020-01-06 15:10 [PATCH v2] usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors Linus Walleij
2020-01-12 11:54 ` Robert Jarzmik
@ 2020-01-22 9:15 ` Greg Kroah-Hartman
1 sibling, 0 replies; 5+ messages in thread
From: Greg Kroah-Hartman @ 2020-01-22 9:15 UTC (permalink / raw)
To: Linus Walleij
Cc: Felipe Balbi, linux-usb, Robert Jarzmik, Daniel Mack,
Haojian Zhuang, Sylwester Nawrocki, Philipp Zabel
On Mon, Jan 06, 2020 at 04:10:05PM +0100, Linus Walleij wrote:
> Instead of using the legacy GPIO API and keeping track on
> polarity inversion semantics in the driver, switch to use
> GPIO descriptors for this driver and change all consumers
> in the process.
>
> This makes it possible to retire platform data completely:
> the only remaining platform data member was "wakeup" which
> was intended to make the vbus interrupt wakeup capable,
> but was not set by any users and thus remained unused. VBUS
> was not waking any devices up. Leave a comment about it so
> later developers using the platform can consider setting it
> to always enabled so plugging in USB wakes up the platform.
>
> Cc: Robert Jarzmik <robert.jarzmik@free.fr>
> Cc: Daniel Mack <daniel@zonque.org>
> Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
> Acked-by: Felipe Balbi <balbi@kernel.org>
> Acked-by: Sylwester Nawrocki <snawrocki@kernel.org>
> Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
> ---
> ChangeLog v1->v2:
> - Fix a chip label typo in mach-s3c64xx
> - Collect the ACKs!
With this applied, I now get the following build warnings:
drivers/usb/phy/phy-gpio-vbus-usb.c: In function ‘gpio_vbus_probe’:
drivers/usb/phy/phy-gpio-vbus-usb.c:237:11: warning: unused variable ‘gpio’ [-Wunused-variable]
237 | int err, gpio, irq;
| ^~~~
drivers/usb/phy/phy-gpio-vbus-usb.c:235:20: warning: unused variable ‘gpiod’ [-Wunused-variable]
235 | struct gpio_desc *gpiod;
| ^~~~~
Can you please fix that up and resend?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-01-22 9:16 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-06 15:10 [PATCH v2] usb: phy: phy-gpio-vbus-usb: Convert to GPIO descriptors Linus Walleij
2020-01-12 11:54 ` Robert Jarzmik
2020-01-14 0:29 ` Linus Walleij
2020-01-18 22:00 ` Robert Jarzmik
2020-01-22 9:15 ` Greg Kroah-Hartman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).