From: Johan Hovold <johan@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>, edes <edes@gmx.net>,
Takashi Iwai <tiwai@suse.de>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
Johan Hovold <johan@kernel.org>
Subject: [PATCH 3/3] USB: core: clean up endpoint-descriptor parsing
Date: Mon, 3 Feb 2020 16:38:30 +0100 [thread overview]
Message-ID: <20200203153830.26394-4-johan@kernel.org> (raw)
In-Reply-To: <20200203153830.26394-1-johan@kernel.org>
Use the new usb-device pointer instead of back-casting when accessing
the struct usb_device when parsing endpoints.
Note that this introduces two lines that are longer than 80 chars on
purpose.
Signed-off-by: Johan Hovold <johan@kernel.org>
---
drivers/usb/core/config.c | 20 ++++++++------------
1 file changed, 8 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 7df22bcefa9d..b7918f695434 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -322,7 +322,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
j = 255;
if (usb_endpoint_xfer_int(d)) {
i = 1;
- switch (to_usb_device(ddev)->speed) {
+ switch (udev->speed) {
case USB_SPEED_SUPER_PLUS:
case USB_SPEED_SUPER:
case USB_SPEED_HIGH:
@@ -343,8 +343,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
/*
* This quirk fixes bIntervals reported in ms.
*/
- if (to_usb_device(ddev)->quirks &
- USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL) {
+ if (udev->quirks & USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL) {
n = clamp(fls(d->bInterval) + 3, i, j);
i = j = n;
}
@@ -352,8 +351,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
* This quirk fixes bIntervals reported in
* linear microframes.
*/
- if (to_usb_device(ddev)->quirks &
- USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL) {
+ if (udev->quirks & USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL) {
n = clamp(fls(d->bInterval), i, j);
i = j = n;
}
@@ -370,7 +368,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
} else if (usb_endpoint_xfer_isoc(d)) {
i = 1;
j = 16;
- switch (to_usb_device(ddev)->speed) {
+ switch (udev->speed) {
case USB_SPEED_HIGH:
n = 7; /* 8 ms = 2^(7-1) uframes */
break;
@@ -392,8 +390,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
* explicitly forbidden by the USB spec. In an attempt to make
* them usable, we will try treating them as Interrupt endpoints.
*/
- if (to_usb_device(ddev)->speed == USB_SPEED_LOW &&
- usb_endpoint_xfer_bulk(d)) {
+ if (udev->speed == USB_SPEED_LOW && usb_endpoint_xfer_bulk(d)) {
dev_warn(ddev, "config %d interface %d altsetting %d "
"endpoint 0x%X is Bulk; changing to Interrupt\n",
cfgno, inum, asnum, d->bEndpointAddress);
@@ -417,7 +414,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
/* Find the highest legal maxpacket size for this endpoint */
i = 0; /* additional transactions per microframe */
- switch (to_usb_device(ddev)->speed) {
+ switch (udev->speed) {
case USB_SPEED_LOW:
maxpacket_maxes = low_speed_maxpacket_maxes;
break;
@@ -453,8 +450,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
* maxpacket sizes other than 512. High speed HCDs may not
* be able to handle that particular bug, so let's warn...
*/
- if (to_usb_device(ddev)->speed == USB_SPEED_HIGH
- && usb_endpoint_xfer_bulk(d)) {
+ if (udev->speed == USB_SPEED_HIGH && usb_endpoint_xfer_bulk(d)) {
if (maxp != 512)
dev_warn(ddev, "config %d interface %d altsetting %d "
"bulk endpoint 0x%X has invalid maxpacket %d\n",
@@ -463,7 +459,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno,
}
/* Parse a possible SuperSpeed endpoint companion descriptor */
- if (to_usb_device(ddev)->speed >= USB_SPEED_SUPER)
+ if (udev->speed >= USB_SPEED_SUPER)
usb_parse_ss_endpoint_companion(ddev, cfgno,
inum, asnum, endpoint, buffer, size);
--
2.24.1
prev parent reply other threads:[~2020-02-03 15:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-03 15:38 [PATCH 0/3] USB: core: add endpoint-blacklist quirk Johan Hovold
2020-02-03 15:38 ` [PATCH 1/3] " Johan Hovold
2020-02-03 15:38 ` [PATCH 2/3] USB: quirks: blacklist duplicate ep on Sound Devices USBPre2 Johan Hovold
2020-02-03 15:38 ` Johan Hovold [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200203153830.26394-4-johan@kernel.org \
--to=johan@kernel.org \
--cc=edes@gmx.net \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).