From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-usb@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Christoph Jung <jung@codemercs.com>
Subject: [PATCH 2/2] USB: misc: iowarrior: add support for the 28 and 28L devices
Date: Tue, 11 Feb 2020 20:04:22 -0800 [thread overview]
Message-ID: <20200212040422.2991-2-gregkh@linuxfoundation.org> (raw)
In-Reply-To: <20200212040422.2991-1-gregkh@linuxfoundation.org>
Add new device ids for the 28 and 28L devices. These have 4 interfaces
instead of 2, but the driver binds the same, so the driver changes are
minimal.
Cc: Christoph Jung <jung@codemercs.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/misc/iowarrior.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 990acbe14852..d20b60acfe8a 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -33,6 +33,9 @@
#define USB_DEVICE_ID_CODEMERCS_IOWPV2 0x1512
/* full speed iowarrior */
#define USB_DEVICE_ID_CODEMERCS_IOW56 0x1503
+/* fuller speed iowarrior */
+#define USB_DEVICE_ID_CODEMERCS_IOW28 0x1504
+#define USB_DEVICE_ID_CODEMERCS_IOW28L 0x1505
/* OEMed devices */
#define USB_DEVICE_ID_CODEMERCS_IOW24SAG 0x158a
@@ -139,6 +142,8 @@ static const struct usb_device_id iowarrior_ids[] = {
{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56)},
{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24SAG)},
{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56AM)},
+ {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28)},
+ {USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28L)},
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, iowarrior_ids);
@@ -379,6 +384,8 @@ static ssize_t iowarrior_write(struct file *file,
break;
case USB_DEVICE_ID_CODEMERCS_IOW56:
case USB_DEVICE_ID_CODEMERCS_IOW56AM:
+ case USB_DEVICE_ID_CODEMERCS_IOW28:
+ case USB_DEVICE_ID_CODEMERCS_IOW28L:
/* The IOW56 uses asynchronous IO and more urbs */
if (atomic_read(&dev->write_busy) == MAX_WRITES_IN_FLIGHT) {
/* Wait until we are below the limit for submitted urbs */
@@ -777,7 +784,9 @@ static int iowarrior_probe(struct usb_interface *interface,
}
if ((dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) ||
- (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM)) {
+ (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM) ||
+ (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28) ||
+ (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28L)) {
res = usb_find_last_int_out_endpoint(iface_desc,
&dev->int_out_endpoint);
if (res) {
@@ -791,7 +800,9 @@ static int iowarrior_probe(struct usb_interface *interface,
dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) &&
((dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) ||
- (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM)))
+ (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM) ||
+ (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28) ||
+ (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28L)))
/* IOWarrior56 has wMaxPacketSize different from report size */
dev->report_size = 7;
--
2.25.0
prev parent reply other threads:[~2020-02-12 4:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-12 4:04 [PATCH 1/2] USB: misc: iowarrior: add support for 2 OEMed devices Greg Kroah-Hartman
2020-02-12 4:04 ` Greg Kroah-Hartman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200212040422.2991-2-gregkh@linuxfoundation.org \
--to=gregkh@linuxfoundation.org \
--cc=jung@codemercs.com \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).