Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: John Keeping <john@metanate.com>,
	Minas Harutyunyan <hminas@synopsys.com>,
	Felipe Balbi <balbi@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Sasha Levin <sashal@kernel.org>,
	linux-usb@vger.kernel.org
Subject: [PATCH AUTOSEL 5.5 076/542] usb: dwc2: Fix IN FIFO allocation
Date: Fri, 14 Feb 2020 10:41:08 -0500
Message-ID: <20200214154854.6746-76-sashal@kernel.org> (raw)
In-Reply-To: <20200214154854.6746-1-sashal@kernel.org>

From: John Keeping <john@metanate.com>

[ Upstream commit 644139f8b64d818f6345351455f14471510879a5 ]

On chips with fewer FIFOs than endpoints (for example RK3288 which has 9
endpoints, but only 6 which are cabable of input), the DPTXFSIZN
registers above the FIFO count may return invalid values.

With logging added on startup, I see:

	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=1 sz=256
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=2 sz=128
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=3 sz=128
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=4 sz=64
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=5 sz=64
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=6 sz=32
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=7 sz=0
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=8 sz=0
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=9 sz=0
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=10 sz=0
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=11 sz=0
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=12 sz=0
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=13 sz=0
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=14 sz=0
	dwc2 ff580000.usb: dwc2_hsotg_init_fifo: ep=15 sz=0

but:

	# cat /sys/kernel/debug/ff580000.usb/fifo
	Non-periodic FIFOs:
	RXFIFO: Size 275
	NPTXFIFO: Size 16, Start 0x00000113

	Periodic TXFIFOs:
		DPTXFIFO 1: Size 256, Start 0x00000123
		DPTXFIFO 2: Size 128, Start 0x00000223
		DPTXFIFO 3: Size 128, Start 0x000002a3
		DPTXFIFO 4: Size 64, Start 0x00000323
		DPTXFIFO 5: Size 64, Start 0x00000363
		DPTXFIFO 6: Size 32, Start 0x000003a3
		DPTXFIFO 7: Size 0, Start 0x000003e3
		DPTXFIFO 8: Size 0, Start 0x000003a3
		DPTXFIFO 9: Size 256, Start 0x00000123

so it seems that FIFO 9 is mirroring FIFO 1.

Fix the allocation by using the FIFO count instead of the endpoint count
when selecting a FIFO for an endpoint.

Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/dwc2/gadget.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c
index 6be10e496e105..a9133773b89e4 100644
--- a/drivers/usb/dwc2/gadget.c
+++ b/drivers/usb/dwc2/gadget.c
@@ -4056,11 +4056,12 @@ static int dwc2_hsotg_ep_enable(struct usb_ep *ep,
 	 * a unique tx-fifo even if it is non-periodic.
 	 */
 	if (dir_in && hsotg->dedicated_fifos) {
+		unsigned fifo_count = dwc2_hsotg_tx_fifo_count(hsotg);
 		u32 fifo_index = 0;
 		u32 fifo_size = UINT_MAX;
 
 		size = hs_ep->ep.maxpacket * hs_ep->mc;
-		for (i = 1; i < hsotg->num_of_eps; ++i) {
+		for (i = 1; i <= fifo_count; ++i) {
 			if (hsotg->fifo_map & (1 << i))
 				continue;
 			val = dwc2_readl(hsotg, DPTXFSIZN(i));
-- 
2.20.1


  parent reply index

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200214154854.6746-1-sashal@kernel.org>
2020-02-14 15:41 ` [PATCH AUTOSEL 5.5 075/542] usb: gadget: udc: fix possible sleep-in-atomic-context bugs in gr_probe() Sasha Levin
2020-02-14 15:41 ` Sasha Levin [this message]
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 305/542] usb: dwc3: use proper initializers for property entries Sasha Levin
2020-02-14 15:44 ` [PATCH AUTOSEL 5.5 307/542] usbip: Fix unsafe unaligned pointer usage Sasha Levin
2020-02-14 15:45 ` [PATCH AUTOSEL 5.5 364/542] usb: musb: omap2430: Get rid of musb .set_vbus for omap2430 glue Sasha Levin

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200214154854.6746-76-sashal@kernel.org \
    --to=sashal@kernel.org \
    --cc=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hminas@synopsys.com \
    --cc=john@metanate.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git