From: Qais Yousef <qais.yousef@arm.com>
To: Oliver Neukum <oneukum@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: lockdep warning in urb.c:363 usb_submit_urb
Date: Tue, 24 Mar 2020 10:46:12 +0000 [thread overview]
Message-ID: <20200324104610.pqdtaocg6qctlnqv@e107158-lin> (raw)
In-Reply-To: <1585040918.7151.6.camel@suse.de>
[-- Attachment #1: Type: text/plain, Size: 1040 bytes --]
On 03/24/20 10:08, Oliver Neukum wrote:
> Am Montag, den 23.03.2020, 17:29 +0000 schrieb Qais Yousef:
> > Hi Oliver
>
> Hi,
>
> > First time I use dynamic debugging, hopefully I've done correctly.
>
> I am afraid not.
>
> > echo "file drivers/usb/* +p" > /sys/kernel/debug/dynamic_debug/control
>
> Overkill but correct. +mpf would be even better
>
> > $REPRODUCE
>
> Good
>
> > cat /sys/kernel/debug/dynamic_debug/control | grep usb > usb.debug
>
> No.
>
> /sys/kernel/debug/dynamic_debug/control holds the collection of the
> messages that may be triggered, but it does not tell you which messages
> are triggered and in which order. The triggered messages end up
> in syslog. So you would use 'dmesg'
> I am afraid you redid the test correctly and then threw away the
> result.
> Could you redo it and just attach the output of dmesg?
>
> Sorry
I should have stuck to what I know then. I misread the documentation. Hopefully
the attached looks better. I don't see the new debug you added emitted.
Thanks
--
Qais Yousef
[-- Attachment #2: usb.dmesg --]
[-- Type: text/plain, Size: 56459 bytes --]
[ 0.000000] Booting Linux on physical CPU 0x0000000100 [0x410fd033]
[ 0.000000] Linux version 5.6.0-rc6-00002-g533440e608d2 (qyousef@e107158-lin) (gcc version 7.5.0 (Ubuntu/Linaro 7.5.0-3ubuntu1~18.04)) #537 SMP PREEMPT Tue Mar 24 10:16:57 GMT 2020
[ 0.000000] Machine model: ARM Juno development board (r2)
[ 0.000000] earlycon: pl11 at MMIO 0x000000007ff80000 (options '')
[ 0.000000] printk: bootconsole [pl11] enabled
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 32 MiB at 0x00000000fd000000
[ 0.000000] NUMA: No NUMA configuration found
[ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000009ffffffff]
[ 0.000000] NUMA: NODE_DATA [mem 0x9fefdb000-0x9fefdcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000080000000-0x00000000bfffffff]
[ 0.000000] DMA32 [mem 0x00000000c0000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000009ffffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000080000000-0x00000000feffffff]
[ 0.000000] node 0: [mem 0x0000000880000000-0x00000009ffffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000009ffffffff]
[ 0.000000] On node 0 totalpages: 2093056
[ 0.000000] DMA zone: 4096 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 262144 pages, LIFO batch:63
[ 0.000000] DMA32 zone: 4096 pages used for memmap
[ 0.000000] DMA32 zone: 258048 pages, LIFO batch:63
[ 0.000000] Normal zone: 24576 pages used for memmap
[ 0.000000] Normal zone: 1572864 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] psci: SMC Calling Convention v1.0
[ 0.000000] percpu: Embedded 48 pages/cpu s159176 r8192 d29240 u196608
[ 0.000000] pcpu-alloc: s159176 r8192 d29240 u196608 alloc=48*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: detected: ARM erratum 845719
[ 0.000000] CPU features: detected: ARM erratum 843419
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2060288
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: ttyAMA0,115200n8 root=/dev/nfs rw verbose debug ip=dhcp nfsroot=xx.xx.xx.xx:/mnt/data/exports/juno,vers=4,tcp nfsrootdebug rootwait earlycon=pl011,0x7ff80000 systemd.log_target=null user_debug=31 androidboot.hardware=juno loglevel=9 bootargs_sky2=sky2.mac_address=0x00,0x02,0xf7,0x00,0x67,0xbe
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
[ 0.000000] Memory: 8044448K/8372224K available (25724K kernel code, 4126K rwdata, 12236K rodata, 14656K init, 11192K bss, 295008K reserved, 32768K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] ftrace: allocating 77609 entries in 304 pages
[ 0.000000] ftrace: allocated 304 pages with 3 groups
[ 0.000000] Running RCU self tests
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU lockdep checking is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] GICv2m: range[mem 0x2c1c0000-0x2c1cffff], SPI[224:255]
[ 0.000000] GICv2m: range[mem 0x2c1d0000-0x2c1dffff], SPI[256:287]
[ 0.000000] GICv2m: range[mem 0x2c1e0000-0x2c1effff], SPI[288:319]
[ 0.000000] GICv2m: range[mem 0x2c1f0000-0x2c1fffff], SPI[320:351]
[ 0.000000] random: get_random_bytes called from start_kernel+0x5d8/0x784 with crng_init=0
[ 0.000000] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[ 0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[ 0.008555] Failed to initialize '/smb@8000000/motherboard/iofpga@3,00000000/timer@120000': -22
[ 0.018098] arch_timer: cp15 and mmio timer(s) running at 50.00MHz (phys/phys).
[ 0.025443] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb8812736b, max_idle_ns: 440795202655 ns
[ 0.036273] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 4398046511100ns
[ 0.045515] Console: colour dummy device 80x25
[ 0.050047] printk: console [tty0] enabled
[ 0.054293] printk: bootconsole [pl11] disabled
[ 0.058985] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 0.059152] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 0.059252] ... MAX_LOCK_DEPTH: 48
[ 0.059353] ... MAX_LOCKDEP_KEYS: 8192
[ 0.059457] ... CLASSHASH_SIZE: 4096
[ 0.059561] ... MAX_LOCKDEP_ENTRIES: 32768
[ 0.059667] ... MAX_LOCKDEP_CHAINS: 65536
[ 0.059772] ... CHAINHASH_SIZE: 32768
[ 0.059878] memory used by lock dependency info: 6237 kB
[ 0.060000] memory used for stack traces: 4224 kB
[ 0.060111] per task-struct memory footprint: 1920 bytes
[ 0.060233] ------------------------
[ 0.060322] | Locking API testsuite:
[ 0.060412] ----------------------------------------------------------------------------
[ 0.060583] | spin |wlock |rlock |mutex | wsem | rsem |
[ 0.060754] --------------------------------------------------------------------------
[ 0.060934] A-A deadlock: ok | ok | ok | ok | ok | ok | ok |
[ 0.079458] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | ok |
[ 0.099597] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | ok |
[ 0.121450] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | ok |
[ 0.143252] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | ok |
[ 0.166754] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | ok |
[ 0.190217] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | ok |
[ 0.213728] double unlock: ok | ok | ok | ok | ok | ok | ok |
[ 0.232179] initialize held: ok | ok | ok | ok | ok | ok | ok |
[ 0.250005] --------------------------------------------------------------------------
[ 0.250174] recursive read-lock: | ok | | ok |
[ 0.255815] recursive read-lock #2: | ok | | ok |
[ 0.261226] mixed read-write-lock: | ok | | ok |
[ 0.266651] mixed write-read-lock: | ok | | ok |
[ 0.272074] mixed read-lock/lock-write ABBA: |FAILED| | ok |
[ 0.277794] mixed read-lock/lock-read ABBA: | ok | | ok |
[ 0.283677] mixed write-lock/lock-write ABBA: | ok | | ok |
[ 0.289568] --------------------------------------------------------------------------
[ 0.289899] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.297861] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 0.305876] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.313850] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 0.321869] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 0.329856] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 0.337879] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 0.345855] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 0.353875] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 0.361849] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 0.369867] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.378541] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 0.387259] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.395932] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 0.404647] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.413331] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 0.422056] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.430717] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 0.439420] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.447627] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 0.455885] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.464544] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 0.473249] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.481912] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 0.490637] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.499308] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 0.508034] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.516698] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 0.525421] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.534078] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 0.542801] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.551463] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 0.560185] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.568838] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 0.577560] hard-irq lock-inversion/123: ok | ok | ok |
[ 0.586226] soft-irq lock-inversion/123: ok | ok | ok |
[ 0.594948] hard-irq lock-inversion/132: ok | ok | ok |
[ 0.603609] soft-irq lock-inversion/132: ok | ok | ok |
[ 0.612335] hard-irq lock-inversion/213: ok | ok | ok |
[ 0.620999] soft-irq lock-inversion/213: ok | ok | ok |
[ 0.629714] hard-irq lock-inversion/231: ok | ok | ok |
[ 0.638387] soft-irq lock-inversion/231: ok | ok | ok |
[ 0.647101] hard-irq lock-inversion/312: ok | ok | ok |
[ 0.655767] soft-irq lock-inversion/312: ok | ok | ok |
[ 0.664501] hard-irq lock-inversion/321: ok | ok | ok |
[ 0.673168] soft-irq lock-inversion/321: ok | ok | ok |
[ 0.681885] hard-irq read-recursion/123: ok |
[ 0.684842] soft-irq read-recursion/123: ok |
[ 0.687847] hard-irq read-recursion/132: ok |
[ 0.690799] soft-irq read-recursion/132: ok |
[ 0.693801] hard-irq read-recursion/213: ok |
[ 0.696755] soft-irq read-recursion/213: ok |
[ 0.699754] hard-irq read-recursion/231: ok |
[ 0.702712] soft-irq read-recursion/231: ok |
[ 0.705716] hard-irq read-recursion/312: ok |
[ 0.708669] soft-irq read-recursion/312: ok |
[ 0.711670] hard-irq read-recursion/321: ok |
[ 0.714628] soft-irq read-recursion/321: ok |
[ 0.717628] --------------------------------------------------------------------------
[ 0.717796] | Wound/wait tests |
[ 0.717883] ---------------------
[ 0.717970] ww api failures: ok | ok | ok |
[ 0.726471] ww contexts mixing: ok | ok |
[ 0.732069] finishing ww context: ok | ok | ok | ok |
[ 0.743150] locking mismatches: ok | ok | ok |
[ 0.751625] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok |
[ 0.780554] spinlock nest unlocked: ok |
[ 0.783275] -----------------------------------------------------
[ 0.783410] |block | try |context|
[ 0.783545] -----------------------------------------------------
[ 0.783679] context: ok | ok | ok |
[ 0.792405] try: ok | ok | ok |
[ 0.800609] block: ok | ok | ok |
[ 0.808865] spinlock: ok | ok | ok |
[ 0.817805] -------------------------------------------------------
[ 0.817940] Good, all 261 testcases passed! |
[ 0.818042] ---------------------------------
[ 0.818374] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=200000)
[ 0.818650] pid_max: default: 32768 minimum: 301
[ 0.819127] LSM: Security Framework initializing
[ 0.819431] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.819637] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.855086] rcu: Hierarchical SRCU implementation.
[ 0.872279] EFI services will not be available.
[ 0.879406] smp: Bringing up secondary CPUs ...
[ 0.925493] CPU features: detected: EL2 vector hardening
[ 0.925506] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
[ 0.925513] CPU features: detected: ARM erratum 1319367
[ 0.925520] Detected PIPT I-cache on CPU1
[ 0.925581] CPU1: Booted secondary processor 0x0000000000 [0x410fd080]
[ 0.969796] Detected PIPT I-cache on CPU2
[ 0.969832] CPU2: Booted secondary processor 0x0000000001 [0x410fd080]
[ 1.014237] Detected VIPT I-cache on CPU3
[ 1.014311] CPU3: Booted secondary processor 0x0000000101 [0x410fd033]
[ 1.058634] Detected VIPT I-cache on CPU4
[ 1.058692] CPU4: Booted secondary processor 0x0000000102 [0x410fd033]
[ 1.103056] Detected VIPT I-cache on CPU5
[ 1.103113] CPU5: Booted secondary processor 0x0000000103 [0x410fd033]
[ 1.103736] smp: Brought up 1 node, 6 CPUs
[ 1.105371] SMP: Total of 6 processors activated.
[ 1.105592] CPU features: detected: 32-bit EL0 Support
[ 1.105727] CPU features: detected: CRC32 instructions
[ 1.168474] CPU: All CPU(s) started at EL2
[ 1.168736] alternatives: patching kernel code
[ 1.173894] devtmpfs: initialized
[ 1.193840] KASLR disabled due to lack of seed
[ 1.195999] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 1.196122] futex hash table entries: 2048 (order: 6, 262144 bytes, linear)
[ 1.197685] xor: measuring software checksum speed
[ 1.234635] 8regs : 4238.000 MB/sec
[ 1.274844] 32regs : 4762.000 MB/sec
[ 1.315096] arm64_neon: 4290.000 MB/sec
[ 1.315150] xor: using function: 32regs (4762.000 MB/sec)
[ 1.315220] pinctrl core: initialized pinctrl subsystem
[ 1.317981] thermal_sys: Registered thermal governor 'step_wise'
[ 1.317988] thermal_sys: Registered thermal governor 'power_allocator'
[ 1.319705] DMI not present or invalid.
[ 1.320967] NET: Registered protocol family 16
[ 1.325075] DMA: preallocated 256 KiB pool for atomic allocations
[ 1.325159] audit: initializing netlink subsys (disabled)
[ 1.325695] audit: type=2000 audit(1.044:1): state=initialized audit_enabled=0 res=1
[ 1.327803] cpuidle: using governor menu
[ 1.328072] NET: Registered protocol family 42
[ 1.328670] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 1.329170] ASID allocator initialised with 65536 entries
[ 1.331184] Serial: AMBA PL011 UART driver
[ 1.361153] 7ff80000.uart: ttyAMA0 at MMIO 0x7ff80000 (irq = 31, base_baud = 0) is a PL011 rev3
[ 2.798369] printk: console [ttyAMA0] enabled
[ 2.870617] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 2.877509] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[ 2.884316] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 2.891122] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[ 2.924275] cryptd: max_cpu_qlen set to 1000
[ 3.021921] raid6: neonx8 gen() 3076 MB/s
[ 3.094380] raid6: neonx8 xor() 2156 MB/s
[ 3.166878] raid6: neonx4 gen() 3066 MB/s
[ 3.239290] raid6: neonx4 xor() 2275 MB/s
[ 3.311749] raid6: neonx2 gen() 2655 MB/s
[ 3.384196] raid6: neonx2 xor() 2059 MB/s
[ 3.456660] raid6: neonx1 gen() 1970 MB/s
[ 3.529097] raid6: neonx1 xor() 1619 MB/s
[ 3.601566] raid6: int64x8 gen() 1555 MB/s
[ 3.674001] raid6: int64x8 xor() 899 MB/s
[ 3.746469] raid6: int64x4 gen() 1788 MB/s
[ 3.818905] raid6: int64x4 xor() 971 MB/s
[ 3.891361] raid6: int64x2 gen() 1592 MB/s
[ 3.963807] raid6: int64x2 xor() 846 MB/s
[ 4.036254] raid6: int64x1 gen() 1225 MB/s
[ 4.108747] raid6: int64x1 xor() 639 MB/s
[ 4.113096] raid6: using algorithm neonx8 gen() 3076 MB/s
[ 4.118582] raid6: .... xor() 2156 MB/s, rmw enabled
[ 4.123628] raid6: using neon recovery algorithm
[ 4.129207] ACPI: Interpreter disabled.
[ 4.135997] iommu: Default domain type: Translated
[ 4.141562] vgaarb: loaded
[ 4.145325] SCSI subsystem initialized
[ 4.149678] libata version 3.00 loaded.
[ 4.154233] usbcore: registered new interface driver usbfs
[ 4.159929] usbcore: registered new interface driver hub
[ 4.165531] usbcore: registered new device driver usb
[ 4.173548] mc: Linux media interface: v0.10
[ 4.177978] videodev: Linux video capture interface: v2.00
[ 4.183822] pps_core: LinuxPPS API ver. 1 registered
[ 4.188875] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.198170] PTP clock support registered
[ 4.202965] EDAC MC: Ver: 3.0.0
[ 4.208840] FPGA manager framework
[ 4.212815] Advanced Linux Sound Architecture Driver Initialized.
[ 4.220404] Bluetooth: Core ver 2.22
[ 4.224123] NET: Registered protocol family 31
[ 4.228653] Bluetooth: HCI device and connection manager initialized
[ 4.235146] Bluetooth: HCI socket layer initialized
[ 4.240120] Bluetooth: L2CAP socket layer initialized
[ 4.245316] Bluetooth: SCO socket layer initialized
[ 4.251866] clocksource: Switched to clocksource arch_sys_counter
[ 5.094257] VFS: Disk quotas dquot_6.6.0
[ 5.098389] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 5.106111] pnp: PnP ACPI: disabled
[ 5.128825] NET: Registered protocol family 2
[ 5.134147] tcp_listen_portaddr_hash hash table entries: 4096 (order: 6, 294912 bytes, linear)
[ 5.143582] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 5.151961] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes, linear)
[ 5.170386] TCP: Hash tables configured (established 65536 bind 65536)
[ 5.177605] UDP hash table entries: 4096 (order: 7, 655360 bytes, linear)
[ 5.186030] UDP-Lite hash table entries: 4096 (order: 7, 655360 bytes, linear)
[ 5.195062] NET: Registered protocol family 1
[ 5.201498] RPC: Registered named UNIX socket transport module.
[ 5.207580] RPC: Registered udp transport module.
[ 5.212385] RPC: Registered tcp transport module.
[ 5.217186] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.224830] PCI: CLS 0 bytes, default 64
[ 6.572338] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 6.581996] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 6.590456] kvm [1]: IPA Size Limit: 40bits
[ 6.603487] kvm [1]: vgic interrupt IRQ1
[ 6.608115] kvm [1]: Hyp mode initialized successfully
[ 7.077003] rcu-torture:--- Start of test: nreaders=5 nfakewriters=4 stat_interval=60 verbose=1 test_no_idle_hz=1 shuffle_interval=3 stutter=5 irqreader=1 fqs_duration=0 fqs_holdoff=0 fqs_stutter=3 test_boost=1/0 test_boost_interval=7 test_boost_duration=4 shutdown_secs=0 stall_cpu=0 stall_cpu_holdoff=10 stall_cpu_irqsoff=0 n_barrier_cbs=0 onoff_interval=0 onoff_holdoff=0
[ 7.110912] rcu-torture: Creating rcu_torture_writer task
[ 7.116921] rcu-torture: rcu_torture_writer task started
[ 7.116978] rcu-torture: Creating rcu_torture_fakewriter task
[ 7.122474] rcu-torture: GP expediting controlled from boot/sysfs for rcu.
[ 7.128706] rcu-torture: Creating rcu_torture_fakewriter task
[ 7.128721] rcu-torture: rcu_torture_fakewriter task started
[ 7.135516] rcu_torture_writer: Testing conditional GPs.
[ 7.135529] rcu_torture_writer: Testing expedited GPs.
[ 7.135541] rcu_torture_writer: Testing asynchronous GPs.
[ 7.135553] rcu_torture_writer: Testing normal GPs.
[ 7.169278] rcu-torture: Creating rcu_torture_fakewriter task
[ 7.169332] rcu-torture: rcu_torture_fakewriter task started
[ 7.175479] rcu-torture: Creating rcu_torture_fakewriter task
[ 7.175508] rcu-torture: rcu_torture_fakewriter task started
[ 7.192882] rcu-torture: rcu_torture_fakewriter task started
[ 7.192892] rcu-torture: Creating rcu_torture_reader task
[ 7.204420] rcu-torture: Creating rcu_torture_reader task
[ 7.204461] rcu-torture: rcu_torture_reader task started
[ 7.210172] rcu-torture: Creating rcu_torture_reader task
[ 7.210201] rcu-torture: rcu_torture_reader task started
[ 7.226585] rcu-torture: Creating rcu_torture_reader task
[ 7.228494] rcu-torture: rcu_torture_reader task started
[ 7.232344] rcu-torture: Creating rcu_torture_reader task
[ 7.237625] rcu-torture: rcu_torture_reader task started
[ 7.243256] rcu-torture: Creating rcu_torture_stats task
[ 7.244853] rcu-torture: rcu_torture_reader task started
[ 7.259962] rcu-torture: Creating torture_shuffle task
[ 7.259968] rcu-torture: rcu_torture_stats task started
[ 7.265475] rcu-torture: Creating torture_stutter task
[ 7.275822] rcu-torture: torture_shuffle task started
[ 7.281238] rcu-torture: Creating rcu_torture_fwd_prog task
[ 7.287088] rcu-torture: torture_stutter task started
[ 7.290982] Initialise system trusted keyrings
[ 7.292318] rcu-torture: rcu_torture_fwd_progress task started
[ 7.297206] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[ 7.338244] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 7.346622] NFS: Registering the id_resolver key type
[ 7.351878] Key type id_resolver registered
[ 7.356176] Key type id_legacy registered
[ 7.360288] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 7.367522] fuse: init (API version 7.31)
[ 7.373094] 9p: Installing v9fs 9p2000 file system support
[ 7.402140] Key type asymmetric registered
[ 7.406393] Asymmetric key parser 'x509' registered
[ 7.411440] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
[ 7.418983] io scheduler mq-deadline registered
[ 7.423603] io scheduler kyber registered
[ 7.443299] pl061_gpio 1c1d0000.gpio: PL061 GPIO chip registered
[ 7.453154] pci-host-generic 40000000.pcie: host bridge /pcie@40000000 ranges:
[ 7.460555] pci-host-generic 40000000.pcie: IO 0x005f800000..0x005fffffff -> 0x0000000000
[ 7.469469] pci-host-generic 40000000.pcie: MEM 0x0050000000..0x0057ffffff -> 0x0050000000
[ 7.478332] pci-host-generic 40000000.pcie: MEM 0x4000000000..0x40ffffffff -> 0x4000000000
[ 7.487282] pci-host-generic 40000000.pcie: ECAM at [mem 0x40000000-0x4fffffff] for [bus 00-ff]
[ 7.496483] pci-host-generic 40000000.pcie: PCI host bridge to bus 0000:00
[ 7.503487] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 7.509081] pci_bus 0000:00: root bus resource [io 0x0000-0x7fffff]
[ 7.515554] pci_bus 0000:00: root bus resource [mem 0x50000000-0x57ffffff]
[ 7.522555] pci_bus 0000:00: root bus resource [mem 0x4000000000-0x40ffffffff pref]
[ 7.530434] pci 0000:00:00.0: [1556:1100] type 01 class 0x060400
[ 7.536607] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit pref]
[ 7.544142] pci 0000:00:00.0: supports D1 D2
[ 7.548504] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 7.557347] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.565770] pci 0000:01:00.0: [111d:8090] type 01 class 0x060400
[ 7.572049] pci 0000:01:00.0: enabling Extended Tags
[ 7.577301] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 7.597290] pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.605812] pci 0000:02:01.0: [111d:8090] type 01 class 0x060400
[ 7.612083] pci 0000:02:01.0: enabling Extended Tags
[ 7.617356] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 7.624225] pci 0000:02:02.0: [111d:8090] type 01 class 0x060400
[ 7.630498] pci 0000:02:02.0: enabling Extended Tags
[ 7.635769] pci 0000:02:02.0: PME# supported from D0 D3hot D3cold
[ 7.642594] pci 0000:02:03.0: [111d:8090] type 01 class 0x060400
[ 7.648862] pci 0000:02:03.0: enabling Extended Tags
[ 7.654133] pci 0000:02:03.0: PME# supported from D0 D3hot D3cold
[ 7.661312] pci 0000:02:0c.0: [111d:8090] type 01 class 0x060400
[ 7.667579] pci 0000:02:0c.0: enabling Extended Tags
[ 7.672850] pci 0000:02:0c.0: PME# supported from D0 D3hot D3cold
[ 7.679805] pci 0000:02:10.0: [111d:8090] type 01 class 0x060400
[ 7.686059] pci 0000:02:10.0: enabling Extended Tags
[ 7.691313] pci 0000:02:10.0: PME# supported from D0 D3hot D3cold
[ 7.698750] pci 0000:02:1f.0: [111d:8090] type 01 class 0x060400
[ 7.705018] pci 0000:02:1f.0: enabling Extended Tags
[ 7.710287] pci 0000:02:1f.0: PME# supported from D0 D3hot D3cold
[ 7.717099] pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.725258] pci 0000:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.733423] pci 0000:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.741596] pci 0000:02:0c.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.749754] pci 0000:02:10.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.757908] pci 0000:02:1f.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 7.766376] pci 0000:03:00.0: [1095:3132] type 00 class 0x018000
[ 7.772564] pci 0000:03:00.0: reg 0x10: [mem 0x00000000-0x0000007f 64bit]
[ 7.779501] pci 0000:03:00.0: reg 0x18: [mem 0x00000000-0x00003fff 64bit]
[ 7.786422] pci 0000:03:00.0: reg 0x20: [io 0x0000-0x007f]
[ 7.792133] pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
[ 7.799115] pci 0000:03:00.0: supports D1 D2
[ 7.803979] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 7.815435] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
[ 7.823681] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[ 7.831969] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05
[ 7.840257] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
[ 7.848558] pci_bus 0000:07: busn_res: [bus 07-ff] end is updated to 07
[ 7.855611] pci 0000:08:00.0: [11ab:4380] type 00 class 0x020000
[ 7.861796] pci 0000:08:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[ 7.868717] pci 0000:08:00.0: reg 0x18: [io 0x0000-0x00ff]
[ 7.874629] pci 0000:08:00.0: supports D1 D2
[ 7.878987] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 7.887674] pci_bus 0000:08: busn_res: [bus 08-ff] end is updated to 08
[ 7.894415] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 08
[ 7.901151] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 08
[ 7.907908] pci 0000:00:00.0: BAR 14: assigned [mem 0x50000000-0x501fffff]
[ 7.914903] pci 0000:00:00.0: BAR 0: assigned [mem 0x4000000000-0x4000003fff 64bit pref]
[ 7.923140] pci 0000:00:00.0: BAR 13: assigned [io 0x1000-0x2fff]
[ 7.929441] pci 0000:01:00.0: BAR 14: assigned [mem 0x50000000-0x501fffff]
[ 7.936433] pci 0000:01:00.0: BAR 13: assigned [io 0x1000-0x2fff]
[ 7.942734] pci 0000:02:01.0: BAR 14: assigned [mem 0x50000000-0x500fffff]
[ 7.949726] pci 0000:02:1f.0: BAR 14: assigned [mem 0x50100000-0x501fffff]
[ 7.956722] pci 0000:02:01.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 7.963027] pci 0000:02:1f.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 7.969336] pci 0000:03:00.0: BAR 6: assigned [mem 0x50000000-0x5007ffff pref]
[ 7.976696] pci 0000:03:00.0: BAR 2: assigned [mem 0x50080000-0x50083fff 64bit]
[ 7.984155] pci 0000:03:00.0: BAR 0: assigned [mem 0x50084000-0x5008407f 64bit]
[ 7.991613] pci 0000:03:00.0: BAR 4: assigned [io 0x1000-0x107f]
[ 7.997826] pci 0000:02:01.0: PCI bridge to [bus 03]
[ 8.002888] pci 0000:02:01.0: bridge window [io 0x1000-0x1fff]
[ 8.009099] pci 0000:02:01.0: bridge window [mem 0x50000000-0x500fffff]
[ 8.016023] pci 0000:02:02.0: PCI bridge to [bus 04]
[ 8.021115] pci 0000:02:03.0: PCI bridge to [bus 05]
[ 8.026206] pci 0000:02:0c.0: PCI bridge to [bus 06]
[ 8.031297] pci 0000:02:10.0: PCI bridge to [bus 07]
[ 8.036397] pci 0000:08:00.0: BAR 0: assigned [mem 0x50100000-0x50103fff 64bit]
[ 8.043882] pci 0000:08:00.0: BAR 2: assigned [io 0x2000-0x20ff]
[ 8.050092] pci 0000:02:1f.0: PCI bridge to [bus 08]
[ 8.055153] pci 0000:02:1f.0: bridge window [io 0x2000-0x2fff]
[ 8.061363] pci 0000:02:1f.0: bridge window [mem 0x50100000-0x501fffff]
[ 8.068290] pci 0000:01:00.0: PCI bridge to [bus 02-08]
[ 8.073633] pci 0000:01:00.0: bridge window [io 0x1000-0x2fff]
[ 8.079883] pci 0000:01:00.0: bridge window [mem 0x50000000-0x501fffff]
[ 8.086808] pci 0000:00:00.0: PCI bridge to [bus 01-08]
[ 8.092132] pci 0000:00:00.0: bridge window [io 0x1000-0x2fff]
[ 8.098343] pci 0000:00:00.0: bridge window [mem 0x50000000-0x501fffff]
[ 8.105696] pcieport 0000:00:00.0: enabling device (0000 -> 0003)
[ 8.119956] pcieport 0000:00:00.0: PME: Signaling with IRQ 44
[ 8.126905] pcieport 0000:00:00.0: AER: enabled with IRQ 44
[ 8.133174] pcieport 0000:01:00.0: enabling device (0000 -> 0003)
[ 8.139619] pcieport 0000:02:01.0: enabling device (0000 -> 0003)
[ 8.150481] pcieport 0000:02:1f.0: enabling device (0000 -> 0003)
[ 8.160437] IPMI message handler: version 39.2
[ 8.165148] ipmi device interface
[ 8.168672] ipmi_si: IPMI System Interface driver
[ 8.174113] ipmi_si: Unable to find any System Interface(s)
[ 8.181063] EINJ: ACPI disabled.
[ 8.193709] dma-pl330 7ff00000.dma: WARN: Device release is not defined so it is not safe to unbind this driver while in use
[ 8.206485] dma-pl330 7ff00000.dma: Loaded driver for PL330 DMAC-341330
[ 8.213223] dma-pl330 7ff00000.dma: DBUFF-1024x16bytes Num_Chans-8 Num_Peri-8 Num_Events-8
[ 8.238224] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 8.250126] SuperH (H)SCI(F) driver initialized
[ 8.255426] msm_serial: driver initialized
[ 8.263297] arm-smmu 7fb10000.iommu: probing hardware configuration...
[ 8.269962] arm-smmu 7fb10000.iommu: SMMUv1 with:
[ 8.274768] arm-smmu 7fb10000.iommu: stage 2 translation
[ 8.280274] arm-smmu 7fb10000.iommu: non-coherent table walk
[ 8.286124] arm-smmu 7fb10000.iommu: (IDR0.CTTW overridden by FW configuration)
[ 8.293648] arm-smmu 7fb10000.iommu: stream matching with 2 register groups
[ 8.300820] arm-smmu 7fb10000.iommu: 1 context banks (1 stage-2 only)
[ 8.307472] arm-smmu 7fb10000.iommu: Supported page sizes: 0x60211000
[ 8.314117] arm-smmu 7fb10000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 8.321680] arm-smmu 7fb20000.iommu: probing hardware configuration...
[ 8.328333] arm-smmu 7fb20000.iommu: SMMUv1 with:
[ 8.333131] arm-smmu 7fb20000.iommu: stage 2 translation
[ 8.338635] arm-smmu 7fb20000.iommu: non-coherent table walk
[ 8.344489] arm-smmu 7fb20000.iommu: (IDR0.CTTW overridden by FW configuration)
[ 8.352026] arm-smmu 7fb20000.iommu: stream matching with 2 register groups
[ 8.359206] arm-smmu 7fb20000.iommu: 1 context banks (1 stage-2 only)
[ 8.365869] arm-smmu 7fb20000.iommu: Supported page sizes: 0x60211000
[ 8.372530] arm-smmu 7fb20000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 8.379670] arm-smmu 7fb30000.iommu: probing hardware configuration...
[ 8.386320] arm-smmu 7fb30000.iommu: SMMUv1 with:
[ 8.391116] arm-smmu 7fb30000.iommu: stage 2 translation
[ 8.396615] arm-smmu 7fb30000.iommu: coherent table walk
[ 8.402122] arm-smmu 7fb30000.iommu: stream matching with 2 register groups
[ 8.409299] arm-smmu 7fb30000.iommu: 1 context banks (1 stage-2 only)
[ 8.415948] arm-smmu 7fb30000.iommu: Supported page sizes: 0x60211000
[ 8.422588] arm-smmu 7fb30000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 8.567995] tda998x 0-0070: found TDA19988
[ 8.700032] tda998x 0-0071: found TDA19988
[ 8.770858] loop: module loaded
[ 8.909277] mpt3sas version 33.100.00.00 loaded
[ 8.918139] sata_sil24 0000:03:00.0: version 1.1
[ 8.922891] sata_sil24 0000:03:00.0: enabling device (0000 -> 0003)
[ 8.932880] scsi host0: sata_sil24
[ 8.937935] scsi host1: sata_sil24
[ 8.941931] ata1: SATA max UDMA/100 host m128@0x50084000 port 0x50080000 irq 51
[ 8.949371] ata2: SATA max UDMA/100 host m128@0x50084000 port 0x50082000 irq 51
[ 8.964337] libphy: Fixed MDIO Bus: probed
[ 8.970767] tun: Universal TUN/TAP device driver, 1.6
[ 8.977464] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.36-0 (2014/02/10)
[ 8.987430] thunder_xcv, ver 1.0
[ 8.990880] thunder_bgx, ver 1.0
[ 8.994307] nicpf, ver 1.0
[ 8.997957] hclge is initializing
[ 9.001745] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[ 9.009110] hns3: Copyright (c) 2017 Huawei Corporation.
[ 9.014690] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 9.020626] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 9.026786] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 9.033865] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 9.039659] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 9.047614] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 9.054325] sky2: driver version 1.30
[ 9.058390] sky2 0000:08:00.0: enabling device (0000 -> 0003)
[ 9.064334] sky2 0000:08:00.0: Yukon-2 UL 2 chip revision 0
[ 9.070122] sky2 0000:08:00.0 (unnamed net_device) (uninitialized): Invalid MAC address, defaulting to random
[ 9.122388] libphy: smsc911x-mdio: probed
[ 9.137784] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 9.145400] usbcore: registered new interface driver pegasus
[ 9.151233] usbcore: registered new interface driver rtl8150
[ 9.157096] usbcore: registered new interface driver r8152
[ 9.162746] usbcore: registered new interface driver lan78xx
[ 9.168604] usbcore: registered new interface driver asix
[ 9.174168] usbcore: registered new interface driver ax88179_178a
[ 9.180438] usbcore: registered new interface driver cdc_ether
[ 9.186437] usbcore: registered new interface driver dm9601
[ 9.192200] usbcore: registered new interface driver CoreChips
[ 9.198235] usbcore: registered new interface driver smsc75xx
[ 9.204176] usbcore: registered new interface driver smsc95xx
[ 9.210087] usbcore: registered new interface driver net1080
[ 9.215963] usbcore: registered new interface driver plusb
[ 9.221634] usbcore: registered new interface driver cdc_subset
[ 9.227726] usbcore: registered new interface driver zaurus
[ 9.233461] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 9.241085] usbcore: registered new interface driver cdc_ncm
[ 9.247396] VFIO - User Level meta-driver version: 0.3
[ 9.256195] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.262889] ehci-pci: EHCI PCI platform driver
[ 9.267528] ehci-platform: EHCI generic platform driver
[ 9.273435] ehci-platform 7ffc0000.ehci: Adding to iommu group 0
[ 9.280068] ehci-platform 7ffc0000.ehci: EHCI Host Controller
[ 9.286078] ehci-platform 7ffc0000.ehci: new USB bus registered, assigned bus number 1
[ 9.294554] ehci-platform 7ffc0000.ehci: irq 34, io mem 0x7ffc0000
[ 9.315965] ehci-platform 7ffc0000.ehci: USB 2.0 started, EHCI 1.00
[ 9.325070] hub 1-0:1.0: USB hub found
[ 9.329074] hub 1-0:1.0: 1 port detected
[ 9.334431] ehci-orion: EHCI orion driver
[ 9.338751] ehci-exynos: EHCI Exynos driver
[ 9.343214] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 9.349530] ohci-pci: OHCI PCI platform driver
[ 9.354170] ohci-platform: OHCI generic platform driver
[ 9.359769] ohci-platform 7ffb0000.ohci: Adding to iommu group 0
[ 9.366095] ohci-platform 7ffb0000.ohci: Generic Platform OHCI controller
[ 9.373043] ohci-platform 7ffb0000.ohci: new USB bus registered, assigned bus number 2
[ 9.381357] ohci-platform 7ffb0000.ohci: irq 33, io mem 0x7ffb0000
[ 9.465980] hub 2-0:1.0: USB hub found
[ 9.469922] hub 2-0:1.0: 1 port detected
[ 9.474925] ohci-exynos: OHCI Exynos driver
[ 9.480138] usbcore: registered new interface driver usb-storage
[ 9.495052] rtc-pl031 1c170000.rtc: registered as rtc0
[ 9.501816] i2c /dev entries driver
[ 9.510750] usbcore: registered new interface driver uvcvideo
[ 9.516601] USB Video Class driver (1.1.1)
[ 9.520780] gspca_main: v2.14.0 registered
[ 9.531569] sp805-wdt 1c0f0000.wdt: registration successful
[ 9.540146] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[ 9.548791] Bluetooth: HCI UART driver ver 2.3
[ 9.553326] Bluetooth: HCI UART protocol H4 registered
[ 9.558609] Bluetooth: HCI UART protocol LL registered
[ 9.564081] Bluetooth: HCI UART protocol Broadcom registered
[ 9.569971] usbcore: registered new interface driver btusb
[ 9.578149] mmci-pl18x 1c050000.mmci: mmc0: PL180 manf 41 rev0 at 0x1c050000 irq 9,0 (pio)
[ 9.612337] sdhci: Secure Digital Host Controller Interface driver
[ 9.618760] sdhci: Copyright(c) Pierre Ossman
[ 9.623910] Synopsys Designware Multimedia Card Interface Driver
[ 9.631804] sdhci-pltfm: SDHCI platform and OF driver helper
[ 9.641121] leds-syscon 1c010000.apbregs:led0: registered LED vexpress:0
[ 9.648501] leds-syscon 1c010000.apbregs:led1: registered LED vexpress:1
[ 9.655722] leds-syscon 1c010000.apbregs:led2: registered LED vexpress:2
[ 9.663004] leds-syscon 1c010000.apbregs:led3: registered LED vexpress:3
[ 9.670217] leds-syscon 1c010000.apbregs:led4: registered LED vexpress:4
[ 9.675925] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 9.677555] leds-syscon 1c010000.apbregs:led5: registered LED vexpress:5
[ 9.691379] leds-syscon 1c010000.apbregs:led6: registered LED vexpress:6
[ 9.698697] leds-syscon 1c010000.apbregs:led7: registered LED vexpress:7
[ 9.706674] ledtrig-cpu: registered to indicate activity on CPUs
[ 9.716940] usbcore: registered new interface driver usbhid
[ 9.718536] hub 1-1:1.0: USB hub found
[ 9.722710] usbhid: USB HID core driver
[ 9.726796] hub 1-1:1.0: 4 ports detected
[ 9.731660] mhu 2b1f0000.mhu: ARM MHU Mailbox registered
[ 9.753570] drop_monitor: Initializing network drop monitor service
[ 9.764502] NET: Registered protocol family 10
[ 9.771387] Segment Routing with IPv6
[ 9.775683] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 9.783056] NET: Registered protocol family 17
[ 9.787822] Bridge firewalling registered
[ 9.791925] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 9.797958] Bluetooth: HIDP socket layer initialized
[ 9.803093] 8021q: 802.1Q VLAN Support v1.8
[ 9.807737] 9pnet: Installing 9P2000 support
[ 9.812269] Key type dns_resolver registered
[ 9.818002] registered taskstats version 1
[ 9.818711] random: fast init done
[ 9.822216] Loading compiled-in X.509 certificates
[ 9.833679] Btrfs loaded, crc32c=crc32c-generic
[ 9.849847] scpi_protocol scpi: SCP Protocol 1.2 Firmware 1.21.0 version
[ 9.902826] arm-smmu 2b600000.iommu: probing hardware configuration...
[ 9.909730] arm-smmu 2b600000.iommu: SMMUv1 with:
[ 9.914561] arm-smmu 2b600000.iommu: stage 2 translation
[ 9.920057] arm-smmu 2b600000.iommu: coherent table walk
[ 9.925554] arm-smmu 2b600000.iommu: stream matching with 2 register groups
[ 9.932718] arm-smmu 2b600000.iommu: 1 context banks (1 stage-2 only)
[ 9.939356] arm-smmu 2b600000.iommu: Supported page sizes: 0x60211000
[ 9.945999] arm-smmu 2b600000.iommu: Stage-2: 40-bit IPA -> 40-bit PA
[ 9.955816] input: smb@8000000:motherboard:gpio-keys as /devices/platform/smb@8000000/smb@8000000:motherboard/smb@8000000:motherboard:gpio-keys/input/input1
[ 9.972285] rtc-pl031 1c170000.rtc: setting system clock to 2020-03-24T10:26:12 UTC (1585045572)
[ 10.300127] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
[ 10.349460] usb-storage 1-1.1:1.0: USB Mass Storage device detected
[ 10.363200] scsi host2: usb-storage 1-1.1:1.0
[ 10.503999] atkbd serio0: keyboard reset failed on 1c060000.kmi
[ 10.960092] ata1: SATA link down (SStatus 0 SControl 0)
[ 11.410625] scsi 2:0:0:0: Direct-Access TOSHIBA TransMemory PMAP PQ: 0 ANSI: 6
[ 11.427539] sd 2:0:0:0: [sda] 30253056 512-byte logical blocks: (15.5 GB/14.4 GiB)
[ 11.437183] sd 2:0:0:0: [sda] Write Protect is off
[ 11.442275] sd 2:0:0:0: [sda] Mode Sense: 45 00 00 00
[ 11.449859] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 11.532644] sda: sda1 sda2
[ 11.554491] sd 2:0:0:0: [sda] Attached SCSI removable disk
[ 11.751890] atkbd serio1: keyboard reset failed on 1c070000.kmi
[ 13.016042] ata2: SATA link down (SStatus 0 SControl 0)
[ 13.027503] sky2 0000:08:00.0 eth0: enabling interface
[ 13.034374] Generic PHY 18000000.ethernet-ffffffff:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=18000000.ethernet-ffffffff:01, irq=POLL)
[ 13.049029] smsc911x 18000000.ethernet eth1: SMSC911x/921x identified at 0xffff800018ca0000, IRQ: 8
[ 15.120048] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 15.271436] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 15.280364] ALSA device list:
[ 15.283426] No soundcards found.
[ 15.287501] uart-pl011 7ff80000.uart: no DMA platform data
[ 15.293135] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
[ 15.331598] Freeing unused kernel memory: 14656K
[ 15.368044] Run /init as init process
[ 15.371814] with arguments:
[ 15.376160] /init
[ 15.378500] ttyAMA0,115200n8
[ 15.381866] verbose
[ 15.384435] nfsrootdebug
[ 15.387392] with environment:
[ 15.390678] HOME=/
[ 15.393159] TERM=linux
[ 15.396026] user_debug=31
[ 15.399071] bootargs_sky2=sky2.mac_address=0x00,0x02,0xf7,0x00,0x67,0xbe
[ 15.520448] Adding 2543608k swap on /dev/sda2. Priority:-2 extents:1 across:2543608k
[ 18.653510] input: PS/2 Generic Mouse as /devices/platform/smb@8000000/smb@8000000:motherboard/smb@8000000:motherboard:iofpga@3,00000000/1c060000.kmi/serio0/input/input3
[ 18.797800] psmouse serio0: Failed to enable mouse on 1c060000.kmi
[ 19.752741] random: dd: uninitialized urandom read (512 bytes read)
[ 19.871823] random: ssh-keygen: uninitialized urandom read (32 bytes read)
[ 19.903479] random: sshd: uninitialized urandom read (32 bytes read)
[ 19.978048] sky2 0000:08:00.0 eth0: enabling interface
[ 25.360833] input: PS/2 Generic Mouse as /devices/platform/smb@8000000/smb@8000000:motherboard/smb@8000000:motherboard:iofpga@3,00000000/1c070000.kmi/serio1/input/input4
[ 25.496980] psmouse serio1: Failed to enable mouse on 1c070000.kmi
[ 51.795983] Adding 2543608k swap on /dev/sda2. Priority:-2 extents:1 across:2543608k
[ 58.003911] Adding 2543608k swap on /dev/sda2. Priority:-2 extents:1 across:2543608k
[ 68.871904] rcu-torture: rtc: (____ptrval____) ver: 1352 tfle: 0 rta: 1353 rtaf: 0 rtf: 1341 rtmbe: 0 rtbe: 0 rtbke: 0 rtbre: 0 rtbf: 0 rtb: 0 nt: 24895 onoff: 0/0:0/0 -1,0:-1,0 0:0 (HZ=250) barrier: 0/0:0
[ 68.891877] rcu-torture: Reader Pipe: 15093251 3894 0 0 0 0 0 0 0 0 0
[ 68.898586] rcu-torture: Reader Batch: 15088478 8668 0 0 0 0 0 0 0 0 0
[ 68.905361] rcu-torture: Free-Block Circulation: 1352 1351 1350 1349 1348 1347 1345 1344 1342 1341 0
[ 77.064682] cfg80211: failed to load regulatory.db
[ 82.483925] rcu_torture_fwd_prog_nr: Duration 3313 cver 132 gps 323
[ 83.050946] rcu_torture_fwd_prog_cr Duration 29 barrier: 52 pending 11716 n_launders: 13871 n_launders_sa: 4213 n_max_gps: 100 n_max_cbs: 11831 cver 2 gps 7
[ 83.135905] rcu_torture_fwd_cb_hist: Callback-invocation histogram (duration 103 jiffies): 1s/10: 7996:6 2s/10: 17706:4
[ 130.311938] rcu-torture: rtc: (____ptrval____) ver: 2845 tfle: 0 rta: 2845 rtaf: 0 rtf: 2833 rtmbe: 0 rtbe: 0 rtbke: 0 rtbre: 0 rtbf: 0 rtb: 0 nt: 49544 onoff: 0/0:0/0 -1,0:-1,0 0:0 (HZ=250) barrier: 0/0:0
[ 130.331472] rcu-torture: Reader Pipe: 30267437 8086 0 0 0 0 0 0 0 0 0
[ 130.338371] rcu-torture: Reader Batch: 30258284 17244 0 0 0 0 0 0 0 0 0
[ 130.345317] rcu-torture: Free-Block Circulation: 2847 2844 2842 2841 2839 2838 2837 2836 2834 2833 0
[ 155.448590] PM: hibernation: hibernation entry
[ 155.460881] Filesystems sync: 0.001 seconds
[ 155.465293] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 155.475391] OOM killer disabled.
[ 155.483313] PM: hibernation: Preallocating image memory
[ 157.508143] ------------[ cut here ]------------
[ 157.512899] WARNING: CPU: 0 PID: 261 at kernel/rcu/rcutorture.c:1055 rcu_torture_writer+0x664/0xa90
[ 157.522134] Modules linked in:
[ 157.525267] CPU: 0 PID: 261 Comm: rcu_torture_wri Not tainted 5.6.0-rc6-00002-g533440e608d2 #537
[ 157.534233] Hardware name: ARM Juno development board (r2) (DT)
[ 157.540278] pstate: 00000005 (nzcv daif -PAN -UAO)
[ 157.545175] pc : rcu_torture_writer+0x664/0xa90
[ 157.549805] lr : rcu_torture_writer+0x65c/0xa90
[ 157.554432] sp : ffff800018b63de0
[ 157.557821] x29: ffff800018b63de0 x28: ffff80001426e320
[ 157.563253] x27: ffff80001426cf08 x26: ffff80001426cf08
[ 157.568683] x25: ffff8000121b5000 x24: 0000000000000001
[ 157.574111] x23: ffff80001426d648 x22: ffff80001426b000
[ 157.579540] x21: ffff800013439000 x20: ffff80001426e938
[ 157.584968] x19: ffff80001426c000 x18: 0000000000000000
[ 157.590397] x17: 0000000000000000 x16: 0000000000000000
[ 157.595825] x15: 0000000000000000 x14: 0000000000000000
[ 157.601254] x13: 0000000000000000 x12: 0000000000000003
[ 157.606682] x11: 000000000000050f x10: 0000000000000000
[ 157.612116] x9 : ffff800013a130a0 x8 : ffff000975051fd0
[ 157.617547] x7 : 0000000000000000 x6 : ffff800018b63cc0
[ 157.622977] x5 : 0000000000000001 x4 : 0000000000000000
[ 157.628406] x3 : 0000000000000080 x2 : 0000000002611501
[ 157.633835] x1 : 0000000000000000 x0 : 0000000000000001
[ 157.639265] Call trace:
[ 157.641775] rcu_torture_writer+0x664/0xa90
[ 157.646054] kthread+0x13c/0x140
[ 157.649359] ret_from_fork+0x10/0x18
[ 157.653016] irq event stamp: 113198
[ 157.656590] hardirqs last enabled at (113197): [<ffff800010114300>] __local_bh_enable_ip+0x98/0x148
[ 157.665917] hardirqs last disabled at (113198): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258
[ 157.675154] softirqs last enabled at (113196): [<ffff8000101b92a4>] rcu_torture_free+0x84/0x98
[ 157.684038] softirqs last disabled at (113194): [<ffff8000101b9280>] rcu_torture_free+0x60/0x98
[ 157.692916] ---[ end trace dc3eeb58f7182c07 ]---
[ 157.787490] PM: hibernation: Allocated 97253 pages for snapshot
[ 157.793533] PM: hibernation: Allocated 389012 kbytes in 2.29 seconds (169.87 MB/s)
[ 157.801242] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[ 157.813411] printk: Suspending console(s) (use no_console_suspend to debug)
[ 157.872686] usbcore:hub_suspend: hub 1-1:1.0: hub_suspend
[ 157.872801] ehci_hcd:qh_unlink_periodic: usb 1-1: unlink qh256-0001/(____ptrval____) start 1 [1/0 us]
[ 157.875261] usbcore:hub_suspend: hub 1-0:1.0: hub_suspend
[ 157.875422] usbcore:hcd_bus_suspend: usb usb1: bus suspend, wakeup 0
[ 157.875435] ehci_hcd:ehci_bus_suspend: ehci-platform 7ffc0000.ehci: suspend root hub
[ 157.918359] Disabling non-boot CPUs ...
[ 157.922121] CPU1: shutdown
[ 157.922214] psci: CPU1 killed (polled 0 ms)
[ 157.931368] CPU2: shutdown
[ 157.931919] psci: CPU2 killed (polled 4 ms)
[ 157.958718] CPU3: shutdown
[ 157.958742] psci: CPU3 killed (polled 0 ms)
[ 157.978433] CPU4: shutdown
[ 157.978457] psci: CPU4 killed (polled 0 ms)
[ 157.987192] CPU5: shutdown
[ 157.987216] psci: CPU5 killed (polled 0 ms)
[ 157.989182] PM: hibernation: Creating image:
[ 157.989182] PM: hibernation: Need to copy 95313 pages
[ 157.989182] PM: hibernation: Image created (95313 pages copied)
[ 157.989984] Enabling non-boot CPUs ...
[ 158.003937] Detected PIPT I-cache on CPU1
[ 158.004001] CPU1: Booted secondary processor 0x0000000000 [0x410fd080]
[ 158.007405] CPU1 is up
[ 158.029491] Detected PIPT I-cache on CPU2
[ 158.029529] CPU2: Booted secondary processor 0x0000000001 [0x410fd080]
[ 158.030995] CPU2 is up
[ 158.044660] Detected VIPT I-cache on CPU3
[ 158.044745] CPU3: Booted secondary processor 0x0000000101 [0x410fd033]
[ 158.047796] CPU3 is up
[ 158.061584] Detected VIPT I-cache on CPU4
[ 158.061649] CPU4: Booted secondary processor 0x0000000102 [0x410fd033]
[ 158.064910] CPU4 is up
[ 158.078695] Detected VIPT I-cache on CPU5
[ 158.078758] CPU5: Booted secondary processor 0x0000000103 [0x410fd033]
[ 158.083170] CPU5 is up
[ 158.103957] usbcore:hcd_bus_resume: usb usb1: usb resume
[ 158.103986] ehci_hcd:ehci_bus_resume: ehci-platform 7ffc0000.ehci: resume root hub
[ 158.113836] ohci_hcd:ohci_resume: ohci-platform 7ffb0000.ohci: powerup ports
[ 158.139682] usbcore:hcd_bus_resume: usb usb2: usb resume
[ 158.139715] ohci_hcd:ohci_rh_resume: ohci-platform 7ffb0000.ohci: resume root hub
[ 158.162826] usbcore:hub_resume: hub 1-0:1.0: hub_resume
[ 158.163176] usbcore:hub_activate: usb usb1-port1: status 0503 change 0000
[ 158.163369] usbcore:hub_resume: hub 1-1:1.0: hub_resume
[ 158.163735] usbcore:hub_activate: usb 1-1-port1: status 0503 change 0000
[ 158.164492] ehci_hcd:qh_schedule: ehci-platform 7ffc0000.ehci: reused qh (____ptrval____) schedule
[ 158.164506] ehci_hcd:qh_link_periodic: usb 1-1: link qh256-0001/(____ptrval____) start 1 [1/0 us]
[ 158.219604] usbcore:hub_resume: hub 2-0:1.0: hub_resume
[ 158.220482] usb usb2: runtime PM trying to activate child device usb2 but parent (7ffb0000.ohci) is not active
[ 158.482995] PM: Cannot find swap device, try swapon -a
[ 158.488379] PM: Cannot get swap writer
[ 159.064094] OOM killer enabled.
[ 159.067351] Restarting tasks ...
[ 159.068831] usbcore:hub_event: hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 159.079921] usbcore:hub_event: hub 1-1:1.0: state 7 ports 4 chg 0000 evt 0000
[ 159.079959] usbcore:hub_event: hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 159.090776] done.
[ 159.097076] usbcore:hub_resume: hub 2-0:1.0: hub_resume
[ 159.102961] ------------[ cut here ]------------
[ 159.107805] URB (____ptrval____) submitted while active
[ 159.113322] WARNING: CPU: 5 PID: 388 at drivers/usb/core/urb.c:363 usb_submit_urb+0x3d8/0x590
[ 159.122054] Modules linked in:
[ 159.125350] CPU: 5 PID: 388 Comm: kworker/5:2 Tainted: G W 5.6.0-rc6-00002-g533440e608d2 #537
[ 159.125365] Hardware name: ARM Juno development board (r2) (DT)
[ 159.125379] Workqueue: usb_hub_wq hub_event
[ 159.125396] pstate: 40000005 (nZcv daif -PAN -UAO)
[ 159.150713] pc : usb_submit_urb+0x3d8/0x590
[ 159.150724] lr : usb_submit_urb+0x3d8/0x590
[ 159.150732] sp : ffff8000190938b0
[ 159.150740] x29: ffff8000190938b0 x28: 0000000000000003
[ 159.150755] x27: ffff000970512b20 x26: ffff80001340d000
[ 159.150769] x25: ffff80001340d000 x24: ffff800019093b38
[ 159.150783] x23: 0000000000000004 x22: 0000000000000c00
[ 159.150797] x21: 0000000000000000 x20: 00000000fffffff0
[ 159.150811] x19: ffff0009704ef700 x18: ffffffffffffffff
[ 159.150825] x17: 0000000000000000 x16: 0000000000000000
[ 159.150839] x15: ffff80001340da88 x14: 0720072007200720
[ 159.150853] x13: 0720072007200720 x12: 0720072007200720
[ 159.150867] x11: 0000000000000000 x10: 00000000b9d5c580
[ 159.150881] x9 : 0000000000000002 x8 : ffff00097504a020
[ 159.150895] x7 : 0000000000000000 x6 : ffff00097efb6450
[ 159.150911] x5 : ffff00097efb6450 x4 : 0000000000000000
[ 159.150942] PM: hibernation: hibernation exit
[ 159.240807] x3 : ffff00097efc6070 x2 : 0000000000000001
[ 159.246257] x1 : 9f98e61376502200 x0 : 0000000000000000
[ 159.251708] Call trace:
[ 159.254228] usb_submit_urb+0x3d8/0x590
[ 159.258167] hub_activate+0x108/0x7f0
[ 159.261929] hub_resume+0xac/0x148
[ 159.265426] usb_resume_interface.isra.10+0x60/0x138
[ 159.270519] usb_resume_both+0xe4/0x140
[ 159.274460] usb_runtime_resume+0x24/0x30
[ 159.278579] __rpm_callback+0xdc/0x138
[ 159.282430] rpm_callback+0x34/0x98
[ 159.286015] rpm_resume+0x4a8/0x720
[ 159.289601] rpm_resume+0x50c/0x720
[ 159.293186] __pm_runtime_resume+0x4c/0xb8
[ 159.297393] usb_autopm_get_interface+0x28/0x60
[ 159.302041] hub_event+0x80/0x16d8
[ 159.305540] process_one_work+0x2a4/0x748
[ 159.309659] worker_thread+0x48/0x498
[ 159.313422] kthread+0x13c/0x140
[ 159.316742] ret_from_fork+0x10/0x18
[ 159.320413] irq event stamp: 1628
[ 159.323825] hardirqs last enabled at (1627): [<ffff80001019ea1c>] console_unlock+0x504/0x5b8
[ 159.332561] hardirqs last disabled at (1628): [<ffff8000100a95d0>] do_debug_exception+0x1a8/0x258
[ 159.341650] softirqs last enabled at (1624): [<ffff8000100818a4>] __do_softirq+0x4bc/0x568
[ 159.350207] softirqs last disabled at (1613): [<ffff8000101145a4>] irq_exit+0x144/0x150
[ 159.358406] ---[ end trace dc3eeb58f7182c08 ]---
[ 159.363503] hub 2-0:1.0: activate --> -16
[ 159.367776] usbcore:hub_event: hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 159.375217] usbcore:hub_suspend: hub 2-0:1.0: hub_suspend
[ 159.380981] usbcore:hcd_bus_suspend: usb usb2: bus auto-suspend, wakeup 1
[ 159.388048] ohci_hcd:ohci_rh_suspend: ohci-platform 7ffb0000.ohci: suspend root hub
[ 159.767477] rcu_torture_fwd_prog_nr: Duration 3762 cver 287 gps 446
[ 160.127595] ata1: SATA link down (SStatus 0 SControl 0)
[ 160.199587] ata2: SATA link down (SStatus 0 SControl 0)
[ 160.364599] rcu_torture_fwd_prog_cr Duration 60 barrier: 31 pending 14166 n_launders: 41977 n_launders_sa: 32650 n_max_gps: 100 n_max_cbs: 25188 cver 0 gps 13
[ 160.378993] rcu_torture_fwd_cb_hist: Callback-invocation histogram (duration 94 jiffies): 1s/10: 9328:3 2s/10: 34895:6 3s/10: 22942:7
[ 161.166729] usbcore:usb_remote_wakeup: usb usb2: usb wakeup-resume
[ 161.173564] usbcore:hcd_bus_resume: usb usb2: usb auto-resume
[ 161.179575] ohci_hcd:ohci_rh_resume: ohci-platform 7ffb0000.ohci: resume root hub
[ 161.259656] usbcore:hub_resume: hub 2-0:1.0: hub_resume
[ 161.265457] usbcore:hub_event: hub 2-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 161.272917] usbcore:hub_suspend: hub 2-0:1.0: hub_suspend
[ 161.279238] usbcore:hcd_bus_suspend: usb usb2: bus auto-suspend, wakeup 1
[ 161.286336] ohci_hcd:ohci_rh_suspend: ohci-platform 7ffb0000.ohci: suspend root hub
[ 164.787580] psmouse serio0: Failed to enable mouse on 1c060000.kmi
[ 171.429093] psmouse serio1: Failed to enable mouse on 1c070000.kmi
[ 171.510004] random: crng init done
[ 187.479501] cpufreq: __target_index: Failed to change cpu frequency: -5
[ 187.555502] cpufreq: __target_index: Failed to change cpu frequency: -5
[ 187.623502] cpufreq: __target_index: Failed to change cpu frequency: -5
next prev parent reply other threads:[~2020-03-24 10:46 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-23 14:38 lockdep warning in urb.c:363 usb_submit_urb Qais Yousef
2020-03-23 15:36 ` Oliver Neukum
2020-03-23 15:54 ` Alan Stern
2020-03-23 16:02 ` Qais Yousef
2020-03-23 16:18 ` Oliver Neukum
2020-03-23 15:57 ` Qais Yousef
2020-03-23 16:20 ` Oliver Neukum
2020-03-23 17:29 ` Qais Yousef
2020-03-24 9:08 ` Oliver Neukum
2020-03-24 10:46 ` Qais Yousef [this message]
2020-03-24 13:20 ` Oliver Neukum
2020-03-24 13:43 ` Qais Yousef
2020-03-24 13:52 ` Alan Stern
2020-03-24 14:06 ` Qais Yousef
2020-03-24 15:56 ` Alan Stern
2020-03-24 17:22 ` Qais Yousef
2020-03-24 19:22 ` Alan Stern
2020-03-25 15:00 ` Qais Yousef
2020-03-25 20:49 ` Alan Stern
2020-03-25 21:28 ` Rafael J. Wysocki
2020-03-26 12:27 ` Qais Yousef
2020-03-27 20:45 ` Alan Stern
2020-03-28 14:15 ` Rafael J. Wysocki
2020-03-28 19:58 ` Alan Stern
2020-03-29 9:16 ` Rafael J. Wysocki
2020-03-29 13:56 ` Rafael J. Wysocki
2020-03-29 16:27 ` Alan Stern
2020-04-03 15:04 ` Rafael J. Wysocki
2020-04-03 16:13 ` Rafael J. Wysocki
2020-04-03 16:41 ` Alan Stern
2020-04-03 18:32 ` Rafael J. Wysocki
2020-04-03 20:15 ` Alan Stern
2020-04-06 16:45 ` Rafael J. Wysocki
2020-04-06 20:25 ` Alan Stern
2020-04-09 18:45 ` Rafael J. Wysocki
2020-04-11 2:41 ` Alan Stern
2020-04-13 21:32 ` Rafael J. Wysocki
2020-04-14 13:43 ` Rafael J. Wysocki
2020-04-14 17:47 ` Alan Stern
2020-04-15 22:20 ` Rafael J. Wysocki
2020-04-16 15:18 ` Alan Stern
2020-04-17 9:57 ` Rafael J. Wysocki
2020-04-17 16:10 ` Alan Stern
2020-04-17 21:54 ` Rafael J. Wysocki
2020-04-17 23:37 ` Alan Stern
2020-04-18 9:40 ` Rafael J. Wysocki
2020-04-03 17:08 ` Rafael J. Wysocki
2020-04-20 20:26 ` Alan Stern
2020-04-21 11:15 ` Qais Yousef
2020-03-24 13:47 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200324104610.pqdtaocg6qctlnqv@e107158-lin \
--to=qais.yousef@arm.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=oneukum@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).