Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: kishon@ti.com, balbi@kernel.org, khilman@baylibre.com,
	martin.blumenstingl@googlemail.com
Cc: Neil Armstrong <narmstrong@baylibre.com>,
	linux-amlogic@lists.infradead.org, linux-usb@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Hanjie Lin <hanjie.lin@amlogic.com>
Subject: [PATCH v2 02/14] usb: dwc3: meson-g12a: specify phy names in soc data
Date: Thu, 26 Mar 2020 14:44:54 +0100
Message-ID: <20200326134507.4808-3-narmstrong@baylibre.com> (raw)
In-Reply-To: <20200326134507.4808-1-narmstrong@baylibre.com>

To handle the variable USB2 PHY counts on GXL and GXM SoCs, add the
possible PHY names for each SoC in the compatible match data.

Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hanjie Lin <hanjie.lin@amlogic.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 47 +++++++++++++++++++++---------
 1 file changed, 33 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index 902553f39889..d97ead5aee4e 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -96,16 +96,8 @@
 	#define USB_R5_ID_DIG_TH_MASK				GENMASK(15, 8)
 	#define USB_R5_ID_DIG_CNT_MASK				GENMASK(23, 16)
 
-enum {
-	USB2_HOST_PHY = 0,
-	USB2_OTG_PHY,
-	USB3_HOST_PHY,
-	PHY_COUNT,
-};
-
-static const char *phy_names[PHY_COUNT] = {
-	"usb2-phy0", "usb2-phy1", "usb3-phy0",
-};
+#define PHY_COUNT						3
+#define USB2_OTG_PHY						1
 
 static struct clk_bulk_data meson_g12a_clocks[] = {
 	{ .id = NULL },
@@ -117,22 +109,44 @@ static struct clk_bulk_data meson_a1_clocks[] = {
 	{ .id = "xtal_usb_ctrl" },
 };
 
+static const char *meson_g12a_phy_names[] = {
+	"usb2-phy0", "usb2-phy1", "usb3-phy0",
+};
+
+/*
+ * Amlogic A1 has a single physical PHY, in slot 1, but still has the
+ * two U2 PHY controls register blocks like G12A.
+ * Handling the first PHY on slot 1 would need a large amount of code
+ * changes, and the current management is generic enough to handle it
+ * correctly when only the "usb2-phy1" phy is specified on-par with the
+ * DT bindings.
+ */
+static const char *meson_a1_phy_names[] = {
+	"usb2-phy0", "usb2-phy1"
+};
+
 struct dwc3_meson_g12a_drvdata {
 	bool otg_switch_supported;
 	struct clk_bulk_data *clks;
 	int num_clks;
+	const char **phy_names;
+	int num_phys;
 };
 
 static struct dwc3_meson_g12a_drvdata g12a_drvdata = {
 	.otg_switch_supported = true,
 	.clks = meson_g12a_clocks,
 	.num_clks = ARRAY_SIZE(meson_g12a_clocks),
+	.phy_names = meson_g12a_phy_names,
+	.num_phys = ARRAY_SIZE(meson_g12a_phy_names),
 };
 
 static struct dwc3_meson_g12a_drvdata a1_drvdata = {
 	.otg_switch_supported = false,
 	.clks = meson_a1_clocks,
 	.num_clks = ARRAY_SIZE(meson_a1_clocks),
+	.phy_names = meson_a1_phy_names,
+	.num_phys = ARRAY_SIZE(meson_a1_phy_names),
 };
 
 struct dwc3_meson_g12a {
@@ -171,10 +185,13 @@ static int dwc3_meson_g12a_usb2_init(struct dwc3_meson_g12a *priv)
 	else
 		priv->otg_phy_mode = PHY_MODE_USB_HOST;
 
-	for (i = 0 ; i < USB3_HOST_PHY ; ++i) {
+	for (i = 0; i < priv->drvdata->num_phys; ++i) {
 		if (!priv->phys[i])
 			continue;
 
+		if (!strstr(priv->drvdata->phy_names[i], "usb2"))
+			continue;
+
 		regmap_update_bits(priv->regmap, U2P_R0 + (U2P_REG_SIZE * i),
 				   U2P_R0_POWER_ON_RESET,
 				   U2P_R0_POWER_ON_RESET);
@@ -284,17 +301,19 @@ static const struct regmap_config phy_meson_g12a_usb3_regmap_conf = {
 
 static int dwc3_meson_g12a_get_phys(struct dwc3_meson_g12a *priv)
 {
+	const char *phy_name;
 	int i;
 
-	for (i = 0 ; i < PHY_COUNT ; ++i) {
-		priv->phys[i] = devm_phy_optional_get(priv->dev, phy_names[i]);
+	for (i = 0 ; i < priv->drvdata->num_phys ; ++i) {
+		phy_name = priv->drvdata->phy_names[i];
+		priv->phys[i] = devm_phy_optional_get(priv->dev, phy_name);
 		if (!priv->phys[i])
 			continue;
 
 		if (IS_ERR(priv->phys[i]))
 			return PTR_ERR(priv->phys[i]);
 
-		if (i == USB3_HOST_PHY)
+		if (strstr(phy_name, "usb3"))
 			priv->usb3_ports++;
 		else
 			priv->usb2_ports++;
-- 
2.22.0


  parent reply index

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-26 13:44 [PATCH v2 00/14] usb: dwc3: meson: add OTG support for GXL/GXM Neil Armstrong
2020-03-26 13:44 ` [PATCH v2 01/14] dt-bindings: usb: amlogic,meson-g12a-usb-ctrl: add the Amlogic GXL and GXM Families USB Glue Bindings Neil Armstrong
2020-04-04 17:20   ` Rob Herring
2020-03-26 13:44 ` Neil Armstrong [this message]
2020-03-26 13:44 ` [PATCH v2 03/14] usb: dwc3: meson-g12a: handle the phy and glue registers separately Neil Armstrong
2020-03-26 13:44 ` [PATCH v2 04/14] usb: dwc3: meson-g12a: get the reset as shared Neil Armstrong
2020-03-26 13:44 ` [PATCH v2 05/14] usb: dwc3: meson-g12a: check return of dwc3_meson_g12a_usb_init Neil Armstrong
2020-03-26 22:57   ` Martin Blumenstingl
2020-03-26 13:44 ` [PATCH v2 06/14] usb: dwc3: meson-g12a: refactor usb2 phy init Neil Armstrong
2020-03-26 23:08   ` Martin Blumenstingl
2020-03-29 10:35     ` Felipe Balbi
2020-03-26 13:44 ` [PATCH v2 07/14] usb: dwc3: meson-g12a: refactor usb init Neil Armstrong
2020-03-26 23:26   ` Martin Blumenstingl
2020-03-31  8:44     ` Neil Armstrong
2020-03-26 13:45 ` [PATCH v2 08/14] usb: dwc3: meson-g12a: support the GXL/GXM DWC3 host phy disconnect Neil Armstrong
2020-03-26 13:45 ` [PATCH v2 09/14] usb: dwc3: meson-g12a: add support for GXL and GXM SoCs Neil Armstrong
2020-03-26 13:45 ` [PATCH v2 10/14] arm64: dts: amlogic: use the new USB control driver for GXL and GXM Neil Armstrong
2020-04-29 18:17   ` Kevin Hilman
2020-03-26 13:45 ` [PATCH v2 11/14] phy: amlogic: meson-gxl-usb3: remove code for non-existing PHY Neil Armstrong
2020-03-26 13:45 ` [PATCH v2 12/14] usb: dwc3: of-simple: remove Amlogic GXL and AXG compatibles Neil Armstrong
2020-03-26 13:45 ` [PATCH v2 13/14] doc: dt: bindings: usb: dwc3: remove amlogic compatible entries Neil Armstrong
2020-04-04 17:21   ` Rob Herring
2020-03-26 13:45 ` [PATCH v2 14/14] dt-bindings: usb: dwc3: remove old DWC3 wrapper Neil Armstrong
2020-04-04 17:21   ` Rob Herring
2020-03-29 10:36 ` [PATCH v2 00/14] usb: dwc3: meson: add OTG support for GXL/GXM Felipe Balbi
2020-03-31  8:40   ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200326134507.4808-3-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=balbi@kernel.org \
    --cc=hanjie.lin@amlogic.com \
    --cc=khilman@baylibre.com \
    --cc=kishon@ti.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=martin.blumenstingl@googlemail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git