[PATCH 2/4] usb: cdns3: delete role_override

[Peter Chen <peter.chen@nxp.com>]

In short, we have three kinds of role switches:
- Based on SoC: ID and VBUS
- Based on external connnctor, eg, Type-C or GPIO Connector
- Based on user choices through sysfs

Since HW handling and usb-role-switch handling are at
different places, we do not need role_override any more,
and this flag could not judge external connector case well.

With role_override deleted, We use cdns3_hw_role_switch for
the 1st use case, and usb-role-switch for the 2nd and 3rd cases.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
 drivers/usb/cdns3/core.c | 37 -------------------------------------
 drivers/usb/cdns3/core.h |  2 --
 2 files changed, 39 deletions(-)

diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
index 704c679a0c5d..f57c66a9f87c 100644
--- a/drivers/usb/cdns3/core.c
+++ b/drivers/usb/cdns3/core.c
@@ -291,10 +291,6 @@ int cdns3_hw_role_switch(struct cdns3 *cdns)
 	enum usb_role real_role, current_role;
 	int ret = 0;
 
-	/* Do nothing if role based on syfs. */
-	if (cdns->role_override)
-		return 0;
-
 	pm_runtime_get_sync(cdns->dev);
 
 	current_role = cdns->role;
@@ -353,39 +349,6 @@ static int cdns3_role_set(struct usb_role_switch *sw, enum usb_role role)
 
 	pm_runtime_get_sync(cdns->dev);
 
-	/*
-	 * FIXME: switch role framework should be extended to meet
-	 * requirements. Driver assumes that role can be controlled
-	 * by SW or HW. Temporary workaround is to use USB_ROLE_NONE to
-	 * switch from SW to HW control.
-	 *
-	 * For dr_mode == USB_DR_MODE_OTG:
-	 *	if user sets USB_ROLE_HOST or USB_ROLE_DEVICE then driver
-	 *	sets role_override flag and forces that role.
-	 *	if user sets USB_ROLE_NONE, driver clears role_override and lets
-	 *	HW state machine take over.
-	 *
-	 * For dr_mode != USB_DR_MODE_OTG:
-	 *	Assumptions:
-	 *	1. Restricted user control between NONE and dr_mode.
-	 *	2. Driver doesn't need to rely on role_override flag.
-	 *	3. Driver needs to ensure that HW state machine is never called
-	 *	   if dr_mode != USB_DR_MODE_OTG.
-	 */
-	if (role == USB_ROLE_NONE)
-		cdns->role_override = 0;
-	else
-		cdns->role_override = 1;
-
-	/*
-	 * HW state might have changed so driver need to trigger
-	 * HW state machine if dr_mode == USB_DR_MODE_OTG.
-	 */
-	if (!cdns->role_override && cdns->dr_mode == USB_DR_MODE_OTG) {
-		cdns3_hw_role_switch(cdns);
-		goto pm_put;
-	}
-
 	if (cdns->role == role)
 		goto pm_put;
 
diff --git a/drivers/usb/cdns3/core.h b/drivers/usb/cdns3/core.h
index 969eb94de204..1ad1f1fe61e9 100644
--- a/drivers/usb/cdns3/core.h
+++ b/drivers/usb/cdns3/core.h
@@ -62,7 +62,6 @@ struct cdns3_role_driver {
  *           This field based on firmware setting, kernel configuration
  *           and hardware configuration.
  * @role_sw: pointer to role switch object.
- * @role_override: set 1 if role rely on SW.
  */
 struct cdns3 {
 	struct device			*dev;
@@ -90,7 +89,6 @@ struct cdns3 {
 	struct mutex			mutex;
 	enum usb_dr_mode		dr_mode;
 	struct usb_role_switch		*role_sw;
-	int				role_override;
 };
 
 int cdns3_hw_role_switch(struct cdns3 *cdns);
-- 
2.17.1