linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
To: heikki.krogerus@linux.intel.com, linux-usb@vger.kernel.org
Cc: gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
	nikolaus.voss@loewensteinmedical.de,
	andriy.shevchenko@linux.intel.com, garsilva@embeddedor.com,
	keescook@chromium.org,
	Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Subject: [PATCH v2] usb: typec: tps6598x: Add USB role switching logic
Date: Thu,  7 May 2020 22:59:38 +0100	[thread overview]
Message-ID: <20200507215938.1983363-2-bryan.odonoghue@linaro.org> (raw)
In-Reply-To: <20200507215938.1983363-1-bryan.odonoghue@linaro.org>

This patch adds USB role switch support to the tps6598x.

The setup to initiate or accept a data-role switch is both assumed and
currently required to be baked-into the firmware as described in TI's
document here.

Link: https://www.ti.com/lit/an/slva843a/slva843a.pdf

With this change its possible to use the USB role-switch API to detect and
notify role-switches to downstream consumers.

Tested with a ChipIdea controller on a Qualcomm MSM8939.

Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Nikolaus Voss <nikolaus.voss@loewensteinmedical.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Gustavo A. R. Silva <garsilva@embeddedor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/usb/typec/tps6598x.c | 56 +++++++++++++++++++++++++++++++-----
 1 file changed, 49 insertions(+), 7 deletions(-)

diff --git a/drivers/usb/typec/tps6598x.c b/drivers/usb/typec/tps6598x.c
index defa651282b0..b190097c9dba 100644
--- a/drivers/usb/typec/tps6598x.c
+++ b/drivers/usb/typec/tps6598x.c
@@ -12,6 +12,7 @@
 #include <linux/regmap.h>
 #include <linux/interrupt.h>
 #include <linux/usb/typec.h>
+#include <linux/usb/role.h>
 
 /* Register offsets */
 #define TPS_REG_VID			0x00
@@ -94,6 +95,7 @@ struct tps6598x {
 	struct typec_port *port;
 	struct typec_partner *partner;
 	struct usb_pd_identity partner_identity;
+	struct usb_role_switch *role_sw;
 };
 
 /*
@@ -190,6 +192,23 @@ static int tps6598x_read_partner_identity(struct tps6598x *tps)
 	return 0;
 }
 
+static void tps6598x_set_data_role(struct tps6598x *tps,
+				   enum typec_data_role role, bool connected)
+{
+	enum usb_role role_val;
+
+	if (role == TYPEC_HOST)
+		role_val = USB_ROLE_HOST;
+	else
+		role_val = USB_ROLE_DEVICE;
+
+	if (!connected)
+		role_val = USB_ROLE_NONE;
+
+	usb_role_switch_set_role(tps->role_sw, role_val);
+	typec_set_data_role(tps->port, role);
+}
+
 static int tps6598x_connect(struct tps6598x *tps, u32 status)
 {
 	struct typec_partner_desc desc;
@@ -220,7 +239,7 @@ static int tps6598x_connect(struct tps6598x *tps, u32 status)
 	typec_set_pwr_opmode(tps->port, mode);
 	typec_set_pwr_role(tps->port, TPS_STATUS_PORTROLE(status));
 	typec_set_vconn_role(tps->port, TPS_STATUS_VCONN(status));
-	typec_set_data_role(tps->port, TPS_STATUS_DATAROLE(status));
+	tps6598x_set_data_role(tps, TPS_STATUS_DATAROLE(status), true);
 
 	tps->partner = typec_register_partner(tps->port, &desc);
 	if (IS_ERR(tps->partner))
@@ -240,7 +259,7 @@ static void tps6598x_disconnect(struct tps6598x *tps, u32 status)
 	typec_set_pwr_opmode(tps->port, TYPEC_PWR_MODE_USB);
 	typec_set_pwr_role(tps->port, TPS_STATUS_PORTROLE(status));
 	typec_set_vconn_role(tps->port, TPS_STATUS_VCONN(status));
-	typec_set_data_role(tps->port, TPS_STATUS_DATAROLE(status));
+	tps6598x_set_data_role(tps, TPS_STATUS_DATAROLE(status), false);
 }
 
 static int tps6598x_exec_cmd(struct tps6598x *tps, const char *cmd,
@@ -328,7 +347,7 @@ static int tps6598x_dr_set(struct typec_port *port, enum typec_data_role role)
 		goto out_unlock;
 	}
 
-	typec_set_data_role(tps->port, role);
+	tps6598x_set_data_role(tps, role, true);
 
 out_unlock:
 	mutex_unlock(&tps->lock);
@@ -452,6 +471,7 @@ static int tps6598x_probe(struct i2c_client *client)
 {
 	struct typec_capability typec_cap = { };
 	struct tps6598x *tps;
+	struct fwnode_handle *fwnode;
 	u32 status;
 	u32 conf;
 	u32 vid;
@@ -495,11 +515,21 @@ static int tps6598x_probe(struct i2c_client *client)
 	if (ret < 0)
 		return ret;
 
+	fwnode = device_get_named_child_node(&client->dev, "connector");
+	if (!IS_ERR_OR_NULL(fwnode)) {
+		tps->role_sw = fwnode_usb_role_switch_get(fwnode);
+		if (IS_ERR(tps->role_sw)) {
+			ret = PTR_ERR(tps->role_sw);
+			goto err_fwnode_put;
+		}
+	}
+
 	typec_cap.revision = USB_TYPEC_REV_1_2;
 	typec_cap.pd_revision = 0x200;
 	typec_cap.prefer_role = TYPEC_NO_PREFERRED_ROLE;
 	typec_cap.driver_data = tps;
 	typec_cap.ops = &tps6598x_ops;
+	typec_cap.fwnode = fwnode;
 
 	switch (TPS_SYSCONF_PORTINFO(conf)) {
 	case TPS_PORTINFO_SINK_ACCESSORY:
@@ -525,12 +555,16 @@ static int tps6598x_probe(struct i2c_client *client)
 		typec_cap.data = TYPEC_PORT_DFP;
 		break;
 	default:
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_role_put;
 	}
 
 	tps->port = typec_register_port(&client->dev, &typec_cap);
-	if (IS_ERR(tps->port))
-		return PTR_ERR(tps->port);
+	if (IS_ERR(tps->port)) {
+		ret = PTR_ERR(tps->port);
+		goto err_role_put;
+	}
+	fwnode_handle_put(fwnode);
 
 	if (status & TPS_STATUS_PLUG_PRESENT) {
 		ret = tps6598x_connect(tps, status);
@@ -545,12 +579,19 @@ static int tps6598x_probe(struct i2c_client *client)
 	if (ret) {
 		tps6598x_disconnect(tps, 0);
 		typec_unregister_port(tps->port);
-		return ret;
+		goto err_role_put;
 	}
 
 	i2c_set_clientdata(client, tps);
 
 	return 0;
+
+err_role_put:
+	usb_role_switch_put(tps->role_sw);
+err_fwnode_put:
+	fwnode_handle_put(fwnode);
+
+	return ret;
 }
 
 static int tps6598x_remove(struct i2c_client *client)
@@ -559,6 +600,7 @@ static int tps6598x_remove(struct i2c_client *client)
 
 	tps6598x_disconnect(tps, 0);
 	typec_unregister_port(tps->port);
+	usb_role_switch_put(tps->role_sw);
 
 	return 0;
 }
-- 
2.25.1


  reply	other threads:[~2020-05-07 21:59 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-07 21:59 [PATCH v2 0/1] Add USB role switch to tps6598x Bryan O'Donoghue
2020-05-07 21:59 ` Bryan O'Donoghue [this message]
2020-05-11 10:46   ` [PATCH v2] usb: typec: tps6598x: Add USB role switching logic Heikki Krogerus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200507215938.1983363-2-bryan.odonoghue@linaro.org \
    --to=bryan.odonoghue@linaro.org \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=garsilva@embeddedor.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=keescook@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nikolaus.voss@loewensteinmedical.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).