From: Al Cooper <alcooperx@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Al Cooper <alcooperx@gmail.com>,
Alan Stern <stern@rowland.harvard.edu>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
bcm-kernel-feedback-list@broadcom.com,
devicetree@vger.kernel.org,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
linux-usb@vger.kernel.org,
Mathias Nyman <mathias.nyman@intel.com>,
Rob Herring <robh+dt@kernel.org>,
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH v10 5/5] usb: host: Add ability to build new Broadcom STB USB drivers
Date: Tue, 12 May 2020 11:00:19 -0400 [thread overview]
Message-ID: <20200512150019.25903-6-alcooperx@gmail.com> (raw)
In-Reply-To: <20200512150019.25903-1-alcooperx@gmail.com>
Add the build system changes needed to get the Broadcom STB XHCI,
EHCI and OHCI functionality working. The OHCI support does not
require anything unique to Broadcom so the standard ohci-platform
driver is being used. Also update MAINTAINERS.
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
MAINTAINERS | 8 ++++++++
drivers/usb/host/Kconfig | 20 ++++++++++++++++++++
drivers/usb/host/Makefile | 1 +
3 files changed, 29 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 091ec22c1a23..e5e44b595bc4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3481,6 +3481,14 @@ S: Supported
F: Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
F: drivers/i2c/busses/i2c-brcmstb.c
+BROADCOM BRCMSTB USB EHCI DRIVER
+M: Al Cooper <alcooperx@gmail.com>
+L: linux-usb@vger.kernel.org
+L: bcm-kernel-feedback-list@broadcom.com
+S: Maintained
+F: Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
+F: drivers/usb/host/ehci-brcm.*
+
BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER
M: Al Cooper <alcooperx@gmail.com>
L: linux-kernel@vger.kernel.org
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 55bdfdf11e4c..973386bbb522 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -97,6 +97,26 @@ config USB_XHCI_TEGRA
endif # USB_XHCI_HCD
+config USB_EHCI_BRCMSTB
+ tristate
+
+config USB_BRCMSTB
+ tristate "Broadcom STB USB support"
+ depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST
+ select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
+ select USB_EHCI_BRCMSTB if USB_EHCI_HCD
+ select USB_XHCI_PLATFORM if USB_XHCI_HCD
+ help
+ Enables support for XHCI, EHCI and OHCI host controllers
+ found in Broadcom STB SoC's.
+
+ To compile these drivers as modules, choose M here: the
+ modules will be called ohci-platform.ko, ehci-brcm.ko and
+ xhci-plat-hcd.ko
+
+ Disabling this will keep the controllers and corresponding
+ PHYs powered down.
+
config USB_EHCI_HCD
tristate "EHCI HCD (USB 2.0) support"
depends on HAS_DMA && HAS_IOMEM
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index a7f0b8ff7179..265e26cf9209 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -59,6 +59,7 @@ obj-$(CONFIG_USB_EHCI_HCD_STI) += ehci-st.o
obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
+obj-$(CONFIG_USB_EHCI_BRCMSTB) += ehci-brcm.o
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
--
2.17.1
prev parent reply other threads:[~2020-05-12 15:00 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-12 15:00 [PATCH v10 0/5] Add XHCI, EHCI and OHCI support for Broadcom STB SoS's Al Cooper
2020-05-12 15:00 ` [PATCH v10 1/5] usb: xhci: Change the XHCI link order in the Makefile Al Cooper
2020-05-13 12:26 ` Greg Kroah-Hartman
2020-05-13 15:08 ` Florian Fainelli
2020-05-13 15:26 ` Andy Shevchenko
2020-05-13 15:28 ` Florian Fainelli
2020-05-13 16:27 ` Greg Kroah-Hartman
2020-05-13 16:31 ` Florian Fainelli
2020-05-13 17:05 ` Greg Kroah-Hartman
2020-05-13 17:39 ` Alan Stern
2020-05-13 17:46 ` Florian Fainelli
2020-05-13 19:42 ` Alan Cooper
2020-05-20 17:29 ` Alan Cooper
2020-05-21 6:09 ` Greg Kroah-Hartman
2020-05-21 15:37 ` Florian Fainelli
2020-05-12 15:00 ` [PATCH v10 2/5] dt-bindings: Add Broadcom STB USB support Al Cooper
2020-05-12 15:00 ` [PATCH v10 3/5] usb: xhci: xhci-plat: Add support for Broadcom STB SoC's Al Cooper
2020-05-12 15:00 ` [PATCH v10 4/5] usb: ehci: Add new EHCI driver " Al Cooper
2020-05-12 15:00 ` Al Cooper [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200512150019.25903-6-alcooperx@gmail.com \
--to=alcooperx@gmail.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=andy.shevchenko@gmail.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=robh+dt@kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).