Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Peter Chen <peter.chen@nxp.com>
To: balbi@kernel.org, mathias.nyman@intel.com
Cc: linux-usb@vger.kernel.org, linux-imx@nxp.com, pawell@cadence.com,
	rogerq@ti.com, gregkh@linuxfoundation.org, jun.li@nxp.com,
	Peter Chen <peter.chen@nxp.com>
Subject: [PATCH v2 1/9] usb: cdns3: introduce cdns3_set_phy_power API
Date: Sun, 24 May 2020 07:22:56 +0800
Message-ID: <20200523232304.23976-2-peter.chen@nxp.com> (raw)
In-Reply-To: <20200523232304.23976-1-peter.chen@nxp.com>

Since we have both USB2 and USB3 PHYs for cdns3 controller, it is
better we have a unity API to handle both USB2 and USB3's power, it
could simplify code for error handling and further power management
implementation.

Signed-off-by: Peter Chen <peter.chen@nxp.com>
---
 drivers/usb/cdns3/core.c | 44 ++++++++++++++++++++++++++--------------
 1 file changed, 29 insertions(+), 15 deletions(-)

diff --git a/drivers/usb/cdns3/core.c b/drivers/usb/cdns3/core.c
index 19bbb5b7e6b6..bfd09aa98c12 100644
--- a/drivers/usb/cdns3/core.c
+++ b/drivers/usb/cdns3/core.c
@@ -384,6 +384,28 @@ static int cdns3_role_set(struct usb_role_switch *sw, enum usb_role role)
 	return ret;
 }
 
+static int cdns3_set_phy_power(struct cdns3 *cdns, bool on)
+{
+	int ret = 0;
+
+	if (on) {
+		ret = phy_power_on(cdns->usb2_phy);
+		if (ret)
+			return ret;
+
+		ret = phy_power_on(cdns->usb3_phy);
+		if (ret) {
+			phy_power_off(cdns->usb2_phy);
+			return ret;
+		}
+	} else {
+		phy_power_off(cdns->usb3_phy);
+		phy_power_off(cdns->usb2_phy);
+	}
+
+	return 0;
+}
+
 /**
  * cdns3_probe - probe for cdns3 core device
  * @pdev: Pointer to cdns3 core platform device
@@ -477,14 +499,10 @@ static int cdns3_probe(struct platform_device *pdev)
 	if (ret)
 		goto err1;
 
-	ret = phy_power_on(cdns->usb2_phy);
+	ret = cdns3_set_phy_power(cdns, true);
 	if (ret)
 		goto err2;
 
-	ret = phy_power_on(cdns->usb3_phy);
-	if (ret)
-		goto err3;
-
 	sw_desc.set = cdns3_role_set;
 	sw_desc.get = cdns3_role_get;
 	sw_desc.allow_userspace_control = true;
@@ -496,16 +514,16 @@ static int cdns3_probe(struct platform_device *pdev)
 	if (IS_ERR(cdns->role_sw)) {
 		ret = PTR_ERR(cdns->role_sw);
 		dev_warn(dev, "Unable to register Role Switch\n");
-		goto err4;
+		goto err3;
 	}
 
 	ret = cdns3_drd_init(cdns);
 	if (ret)
-		goto err5;
+		goto err4;
 
 	ret = cdns3_core_init_role(cdns);
 	if (ret)
-		goto err5;
+		goto err4;
 
 	device_set_wakeup_capable(dev, true);
 	pm_runtime_set_active(dev);
@@ -522,14 +540,11 @@ static int cdns3_probe(struct platform_device *pdev)
 	dev_dbg(dev, "Cadence USB3 core: probe succeed\n");
 
 	return 0;
-err5:
+err4:
 	cdns3_drd_exit(cdns);
 	usb_role_switch_unregister(cdns->role_sw);
-err4:
-	phy_power_off(cdns->usb3_phy);
-
 err3:
-	phy_power_off(cdns->usb2_phy);
+	cdns3_set_phy_power(cdns, false);
 err2:
 	phy_exit(cdns->usb3_phy);
 err1:
@@ -553,8 +568,7 @@ static int cdns3_remove(struct platform_device *pdev)
 	pm_runtime_put_noidle(&pdev->dev);
 	cdns3_exit_roles(cdns);
 	usb_role_switch_unregister(cdns->role_sw);
-	phy_power_off(cdns->usb2_phy);
-	phy_power_off(cdns->usb3_phy);
+	cdns3_set_phy_power(cdns, false);
 	phy_exit(cdns->usb2_phy);
 	phy_exit(cdns->usb3_phy);
 	return 0;
-- 
2.17.1


  reply index

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-23 23:22 [PATCH v2 0/9] usb: some PM changes for cdns3 and xhci-plat Peter Chen
2020-05-23 23:22 ` Peter Chen [this message]
2020-05-24  5:56   ` [PATCH v2 1/9] usb: cdns3: introduce cdns3_set_phy_power API Jun Li
2020-05-23 23:22 ` [PATCH v2 2/9] usb: cdns3: add runtime PM support Peter Chen
2020-05-24  5:57   ` Jun Li
2020-05-24  6:43     ` Jun Li
2020-05-25  2:57     ` Peter Chen
2020-05-25 12:23       ` Jun Li
2020-05-26  2:03         ` Peter Chen
2020-05-23 23:22 ` [PATCH v2 3/9] usb: cdns3: imx: add glue layer runtime pm implementation Peter Chen
2020-05-24  6:55   ` Jun Li
2020-05-25  2:59     ` Peter Chen
2020-05-25  4:53   ` kbuild test robot
2020-05-25  6:31     ` Peter Chen
2020-05-25  8:25   ` kbuild test robot
2020-05-23 23:22 ` [PATCH v2 4/9] usb: host: xhci-plat: add platform data support Peter Chen
2020-05-23 23:23 ` [PATCH v2 5/9] usb: host: xhci-plat: add .suspend_quirk for struct xhci_plat_priv Peter Chen
2020-05-23 23:23 ` [PATCH v2 6/9] usb: host: xhci-plat: delete the unnecessary code Peter Chen
2020-05-24  7:40   ` Jun Li
2020-05-23 23:23 ` [PATCH v2 7/9] usb: host: xhci-plat: add priv flag for skip_phy_initialization Peter Chen
2020-05-24  7:40   ` Jun Li
2020-05-25  3:03     ` Peter Chen
2020-05-25 12:30       ` Jun Li
2020-05-26  0:26         ` Peter Chen
2020-05-23 23:23 ` [PATCH v2 8/9] usb: cdns3: host: add .suspend_quirk for xhci-plat.c Peter Chen
2020-05-23 23:23 ` [PATCH v2 9/9] usb: cdns3: host: add xhci_plat_priv's flag skip_phy_initialization Peter Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200523232304.23976-2-peter.chen@nxp.com \
    --to=peter.chen@nxp.com \
    --cc=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jun.li@nxp.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=mathias.nyman@intel.com \
    --cc=pawell@cadence.com \
    --cc=rogerq@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git