From: Guenter Roeck <linux@roeck-us.net>
To: Prashant Malani <pmalani@chromium.org>
Cc: linux-kernel@vger.kernel.org, enric.balletbo@collabora.com,
bleung@chromium.org, groeck@chromium.org,
Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
"open list:DESIGNWARE USB3 DRD IP DRIVER"
<linux-usb@vger.kernel.org>
Subject: Re: [RFC PATCH 1/1] usb: dwc3: of-simple: Add extcon support
Date: Thu, 28 May 2020 09:21:23 -0700 [thread overview]
Message-ID: <20200528162123.GA22568@roeck-us.net> (raw)
In-Reply-To: <20200523041201.75217-2-pmalani@chromium.org>
On Fri, May 22, 2020 at 09:12:02PM -0700, Prashant Malani wrote:
> Add optional extcon notifier support to enable the hotplug / unplug of
> the underlying PHY layer devices.
>
> If supported, the Device Tree (DT) node for the device should include an
> "extcon" property which is a phandle to an extcon DT node.
>
> This patch is an effort to incorporate the equivalent support from the
> Rockchip dwc3 driver implementation from Chrome OS [1] to the mainline.
>
> [1] : https://chromium.googlesource.com/chromiumos/third_party/kernel/
> +/refs/heads/chromeos-4.4/drivers/usb/dwc3/dwc3-rockchip.c
>
> Cc: Benson Leung <bleung@chromium.org>
> Cc: Guenter Roeck <groeck@chromium.org>
> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
> Signed-off-by: Prashant Malani <pmalani@chromium.org>
Couple of nitpicks, otherwise
Reviewed-by: Guenter Roeck <groeck@chromium.org>
> ---
> drivers/usb/dwc3/dwc3-of-simple.c | 149 +++++++++++++++++++++++++++++-
> 1 file changed, 146 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-of-simple.c b/drivers/usb/dwc3/dwc3-of-simple.c
> index e64754be47b4..28bde27cd1f9 100644
> --- a/drivers/usb/dwc3/dwc3-of-simple.c
> +++ b/drivers/usb/dwc3/dwc3-of-simple.c
> @@ -11,6 +11,7 @@
> * by Subbaraya Sundeep Bhatta <subbaraya.sundeep.bhatta@xilinx.com>
> */
>
> +#include <linux/extcon.h>
> #include <linux/module.h>
> #include <linux/kernel.h>
> #include <linux/slab.h>
> @@ -29,8 +30,117 @@ struct dwc3_of_simple {
> struct reset_control *resets;
> bool pulse_resets;
> bool need_reset;
> + struct extcon_dev *edev;
> + struct notifier_block nb;
> + struct work_struct work;
> + /* Denotes whether child devices have been populated. */
> + bool populated;
> + bool suspended;
> + spinlock_t suspend_lock;
> };
>
> +static int dwc3_of_simple_populate(struct dwc3_of_simple *simple)
> +{
> + struct device *dev = simple->dev;
> + struct device_node *np = dev->of_node;
> + int ret;
> +
> + ret = of_platform_populate(np, NULL, NULL, dev);
> + if (ret) {
> + dev_err(dev, "Failed to populate dwc3 devices.\n");
> + return ret;
> + }
> + simple->populated = true;
> + return 0;
> +}
> +
> +static void dwc3_of_simple_depopulate(struct dwc3_of_simple *simple)
> +{
> + if (simple->populated) {
> + of_platform_depopulate(simple->dev);
> + simple->populated = false;
> + }
> +}
> +
> +static void dwc3_of_simple_work(struct work_struct *work)
> +{
> + struct dwc3_of_simple *simple = container_of(work,
> + struct dwc3_of_simple, work);
> + struct extcon_dev *edev = simple->edev;
> +
> + if (extcon_get_state(edev, EXTCON_USB_HOST) > 0) {
> + if (simple->populated)
> + return;
> +
> + dwc3_of_simple_populate(simple);
> + } else {
> + if (!simple->populated)
> + return;
> +
> + dwc3_of_simple_depopulate(simple);
> + }
> +}
> +
> +static int dwc3_of_simple_notifier(struct notifier_block *nb,
> + unsigned long event, void *ptr)
Multi-line alignment is off.
> +{
> + struct dwc3_of_simple *simple = container_of(nb, struct dwc3_of_simple,
> + nb);
> + unsigned long flags;
> +
> + spin_lock_irqsave(&simple->suspend_lock, flags);
> + if (!simple->suspended)
> + schedule_work(&simple->work);
> + spin_unlock_irqrestore(&simple->suspend_lock, flags);
> +
> + return NOTIFY_OK;
> +}
> +
> +static int dwc3_of_simple_extcon_register(struct dwc3_of_simple *simple)
> +{
> + struct device *dev = simple->dev;
> + struct extcon_dev *edev;
> + int ret;
> +
> + edev = extcon_get_edev_by_phandle(dev, 0);
> + if (IS_ERR(edev)) {
> + /* The extcon property is optional. */
> + if (PTR_ERR(edev) == -ENODEV)
> + return 0;
> + if (PTR_ERR(edev) != -EPROBE_DEFER)
> + dev_err(dev, "Couldn't get extcon device.\n");
> + return PTR_ERR(edev);
> + }
> +
> + INIT_WORK(&simple->work, dwc3_of_simple_work);
> +
> + simple->nb.notifier_call = dwc3_of_simple_notifier;
> + ret = devm_extcon_register_notifier(dev, edev, EXTCON_USB_HOST,
> + &simple->nb);
Same here.
> + if (ret < 0) {
> + dev_err(dev, "Failed to register notifier.\n");
> + return ret;
> + }
> +
> + simple->edev = edev;
> +
> + return 0;
> +}
> +
> +static void dwc3_of_simple_extcon_unregister(struct dwc3_of_simple *simple)
> +{
> + if (!simple->edev)
> + return;
> +
> + /*
> + * We explicitly unregister the notifier to prevent races with
> + * the of_depopulate() call in remove().
> + */
> + devm_extcon_unregister_notifier(simple->dev, simple->edev,
> + EXTCON_USB_HOST, &simple->nb);
> + cancel_work_sync(&simple->work);
> +}
> +
> static int dwc3_of_simple_probe(struct platform_device *pdev)
> {
> struct dwc3_of_simple *simple;
> @@ -47,6 +157,8 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
> platform_set_drvdata(pdev, simple);
> simple->dev = dev;
>
> + spin_lock_init(&simple->suspend_lock);
> +
> /*
> * Some controllers need to toggle the usb3-otg reset before trying to
> * initialize the PHY, otherwise the PHY times out.
> @@ -87,9 +199,24 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
> if (ret)
> goto err_resetc_assert;
>
> - ret = of_platform_populate(np, NULL, NULL, dev);
> - if (ret)
> + ret = dwc3_of_simple_extcon_register(simple);
> + if (ret < 0) {
> + dev_warn(dev, "No extcon device found, err: %d\n", ret);
> goto err_clk_put;
> + }
> +
> + if (!simple->edev) {
> + ret = dwc3_of_simple_populate(simple);
> + if (ret)
> + goto err_clk_put;
> + } else {
> + /*
> + * Populate through worker to avoid race conditions against
> + * action scheduled through notifier.
> + */
> + if (extcon_get_state(simple->edev, EXTCON_USB_HOST) > 0)
> + schedule_work(&simple->work);
> + }
>
> pm_runtime_set_active(dev);
> pm_runtime_enable(dev);
> @@ -112,7 +239,8 @@ static int dwc3_of_simple_probe(struct platform_device *pdev)
>
> static void __dwc3_of_simple_teardown(struct dwc3_of_simple *simple)
> {
> - of_platform_depopulate(simple->dev);
> + dwc3_of_simple_extcon_unregister(simple);
> + dwc3_of_simple_depopulate(simple);
>
> clk_bulk_disable_unprepare(simple->num_clocks, simple->clks);
> clk_bulk_put_all(simple->num_clocks, simple->clks);
> @@ -163,6 +291,13 @@ static int __maybe_unused dwc3_of_simple_runtime_resume(struct device *dev)
> static int __maybe_unused dwc3_of_simple_suspend(struct device *dev)
> {
> struct dwc3_of_simple *simple = dev_get_drvdata(dev);
> + unsigned long flags;
> +
> + spin_lock_irqsave(&simple->suspend_lock, flags);
> + simple->suspended = true;
> + spin_unlock_irqrestore(&simple->suspend_lock, flags);
> +
> + cancel_work_sync(&simple->work);
>
> if (simple->need_reset)
> reset_control_assert(simple->resets);
> @@ -173,10 +308,18 @@ static int __maybe_unused dwc3_of_simple_suspend(struct device *dev)
> static int __maybe_unused dwc3_of_simple_resume(struct device *dev)
> {
> struct dwc3_of_simple *simple = dev_get_drvdata(dev);
> + unsigned long flags;
>
> if (simple->need_reset)
> reset_control_deassert(simple->resets);
>
> + spin_lock_irqsave(&simple->suspend_lock, flags);
> + simple->suspended = false;
> + spin_unlock_irqrestore(&simple->suspend_lock, flags);
> +
> + if (simple->edev)
> + schedule_work(&simple->work);
> +
> return 0;
> }
>
prev parent reply other threads:[~2020-05-28 16:21 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-23 4:12 [RFC PATCH 0/1] usb: dwc3: Extcon hotplug support to of-simple Prashant Malani
2020-05-23 4:12 ` [RFC PATCH 1/1] usb: dwc3: of-simple: Add extcon support Prashant Malani
2020-05-28 16:21 ` Guenter Roeck [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200528162123.GA22568@roeck-us.net \
--to=linux@roeck-us.net \
--cc=balbi@kernel.org \
--cc=bleung@chromium.org \
--cc=enric.balletbo@collabora.com \
--cc=gregkh@linuxfoundation.org \
--cc=groeck@chromium.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=pmalani@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).