From: Wesley Cheng <wcheng@codeaurora.org>
To: bjorn.andersson@linaro.org, kishon@ti.com, vkoul@kernel.org,
agross@kernel.org, balbi@kernel.org, gregkh@linuxfoundation.org,
robh+dt@kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
jackp@codeaurora.org, Wesley Cheng <wcheng@codeaurora.org>
Subject: [PATCH 0/3] Enable USB type C support on SM8150
Date: Thu, 30 Jul 2020 21:57:09 -0700 [thread overview]
Message-ID: <20200731045712.28495-1-wcheng@codeaurora.org> (raw)
This series adds support for setting of the orientation multiplexor within the
QMP PHY based on the detection output from the PM8150B. It will also introduce
a role switch in DWC3 QCOM, which is used so that the DWC3 QCOM glue can receive
role switch change events, and set the vbus override accordingly. This event
will then be propagated down to the DWC3 core driver, by the DWC3 QCOM getting a
handle to the DWC3 core's role switch.
Wesley Cheng (3):
arm64: boot: dts: qcom: sm8150: Add nodes for PMIC based typec
detection
phy: qcom-qmp: Register as a typec switch for orientation detection
usb: dwc3: dwc3-qcom: Find USB connector and register role switch
arch/arm64/boot/dts/qcom/sm8150-mtp.dts | 37 ++++++++-
drivers/phy/qualcomm/Kconfig | 11 +++
drivers/phy/qualcomm/phy-qcom-qmp.c | 71 +++++++++++++++-
drivers/usb/dwc3/dwc3-qcom.c | 103 +++++++++++++++++++++++-
4 files changed, 216 insertions(+), 6 deletions(-)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next reply other threads:[~2020-07-31 4:57 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-31 4:57 Wesley Cheng [this message]
2020-07-31 4:57 ` [PATCH 1/3] arm64: boot: dts: qcom: sm8150: Add nodes for PMIC based typec detection Wesley Cheng
2020-07-31 4:57 ` [PATCH 2/3] phy: qcom-qmp: Register as a typec switch for orientation detection Wesley Cheng
2020-07-31 4:57 ` [PATCH 3/3] usb: dwc3: dwc3-qcom: Find USB connector and register role switch Wesley Cheng
2020-08-10 12:13 ` Felipe Balbi
2020-08-10 20:51 ` Wesley Cheng
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200731045712.28495-1-wcheng@codeaurora.org \
--to=wcheng@codeaurora.org \
--cc=agross@kernel.org \
--cc=balbi@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jackp@codeaurora.org \
--cc=kishon@ti.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).