[PATCH AUTOSEL 4.19 14/31] usb: mtu3: clear dual mode of u3port when disable device

[PATCH AUTOSEL 4.19 14/31] usb: mtu3: clear dual mode of u3port when disable device

[Sasha Levin]

From: Chunfeng Yun <chunfeng.yun@mediatek.com>

[ Upstream commit f1e51e99ed498d4aa9ae5df28e43d558ea627781 ]

If not clear u3port's dual mode when disable device, the IP
will fail to enter sleep mode when suspend.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/1595834101-13094-10-git-send-email-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/mtu3/mtu3_core.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index 8606935201326..408e964522ab9 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -128,8 +128,12 @@ static void mtu3_device_disable(struct mtu3 *mtu)
 	mtu3_setbits(ibase, SSUSB_U2_CTRL(0),
 		SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN);
 
-	if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG)
+	if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG) {
 		mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
+		if (mtu->is_u3_ip)
+			mtu3_clrbits(ibase, SSUSB_U3_CTRL(0),
+				     SSUSB_U3_PORT_DUAL_MODE);
+	}
 
 	mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
 }
-- 
2.25.1

[PATCH AUTOSEL 4.19 24/31] usb: gadget: net2280: fix memory leak on probe error handling paths

[Sasha Levin]

From: Evgeny Novikov <novikov@ispras.ru>

[ Upstream commit 2468c877da428ebfd701142c4cdfefcfb7d4c00e ]

Driver does not release memory for device on error handling paths in
net2280_probe() when gadget_release() is not registered yet.

The patch fixes the bug like in other similar drivers.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/net2280.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/net2280.c b/drivers/usb/gadget/udc/net2280.c
index ee872cad52705..a87caad8d1c7e 100644
--- a/drivers/usb/gadget/udc/net2280.c
+++ b/drivers/usb/gadget/udc/net2280.c
@@ -3782,8 +3782,10 @@ static int net2280_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	return 0;
 
 done:
-	if (dev)
+	if (dev) {
 		net2280_remove(pdev);
+		kfree(dev);
+	}
 	return retval;
 }
 
-- 
2.25.1

[PATCH AUTOSEL 4.19 25/31] bdc: Fix bug causing crash after multiple disconnects

[Sasha Levin]

From: Sasi Kumar <sasi.kumar@broadcom.com>

[ Upstream commit a95bdfd22076497288868c028619bc5995f5cc7f ]

Multiple connects/disconnects can cause a crash on the second
disconnect. The driver had a problem where it would try to send
endpoint commands after it was disconnected which is not allowed
by the hardware. The fix is to only allow the endpoint commands
when the endpoint is connected. This will also fix issues that
showed up when using configfs to create gadgets.

Signed-off-by: Sasi Kumar <sasi.kumar@broadcom.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/bdc/bdc_core.c |  4 ++++
 drivers/usb/gadget/udc/bdc/bdc_ep.c   | 16 ++++++++++------
 2 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 01b44e1596237..4c557f3154460 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -283,6 +283,7 @@ static void bdc_mem_init(struct bdc *bdc, bool reinit)
 	 * in that case reinit is passed as 1
 	 */
 	if (reinit) {
+		int i;
 		/* Enable interrupts */
 		temp = bdc_readl(bdc->regs, BDC_BDCSC);
 		temp |= BDC_GIE;
@@ -292,6 +293,9 @@ static void bdc_mem_init(struct bdc *bdc, bool reinit)
 		/* Initialize SRR to 0 */
 		memset(bdc->srr.sr_bds, 0,
 					NUM_SR_ENTRIES * sizeof(struct bdc_bd));
+		/* clear ep flags to avoid post disconnect stops/deconfigs */
+		for (i = 1; i < bdc->num_eps; ++i)
+			bdc->bdc_ep_array[i]->flags = 0;
 	} else {
 		/* One time initiaization only */
 		/* Enable status report function pointers */
diff --git a/drivers/usb/gadget/udc/bdc/bdc_ep.c b/drivers/usb/gadget/udc/bdc/bdc_ep.c
index d49c6dc1082dc..9ddc0b4e92c9c 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_ep.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_ep.c
@@ -615,7 +615,6 @@ int bdc_ep_enable(struct bdc_ep *ep)
 	}
 	bdc_dbg_bd_list(bdc, ep);
 	/* only for ep0: config ep is called for ep0 from connect event */
-	ep->flags |= BDC_EP_ENABLED;
 	if (ep->ep_num == 1)
 		return ret;
 
@@ -759,10 +758,13 @@ static int ep_dequeue(struct bdc_ep *ep, struct bdc_req *req)
 					__func__, ep->name, start_bdi, end_bdi);
 	dev_dbg(bdc->dev, "ep_dequeue ep=%p ep->desc=%p\n",
 						ep, (void *)ep->usb_ep.desc);
-	/* Stop the ep to see where the HW is ? */
-	ret = bdc_stop_ep(bdc, ep->ep_num);
-	/* if there is an issue with stopping ep, then no need to go further */
-	if (ret)
+	/* if still connected, stop the ep to see where the HW is ? */
+	if (!(bdc_readl(bdc->regs, BDC_USPC) & BDC_PST_MASK)) {
+		ret = bdc_stop_ep(bdc, ep->ep_num);
+		/* if there is an issue, then no need to go further */
+		if (ret)
+			return 0;
+	} else
 		return 0;
 
 	/*
@@ -1911,7 +1913,9 @@ static int bdc_gadget_ep_disable(struct usb_ep *_ep)
 		__func__, ep->name, ep->flags);
 
 	if (!(ep->flags & BDC_EP_ENABLED)) {
-		dev_warn(bdc->dev, "%s is already disabled\n", ep->name);
+		if (bdc->gadget.speed != USB_SPEED_UNKNOWN)
+			dev_warn(bdc->dev, "%s is already disabled\n",
+				 ep->name);
 		return 0;
 	}
 	spin_lock_irqsave(&bdc->lock, flags);
-- 
2.25.1

[PATCH AUTOSEL 4.19 26/31] usb: bdc: Halt controller on suspend

[Sasha Levin]

From: Danesh Petigara <danesh.petigara@broadcom.com>

[ Upstream commit 5fc453d7de3d0c345812453823a3a56783c5f82c ]

GISB bus error kernel panics have been observed during S2 transition
tests on the 7271t platform. The errors are a result of the BDC
interrupt handler trying to access BDC register space after the
system's suspend callbacks have completed.

Adding a suspend hook to the BDC driver that halts the controller before
S2 entry thus preventing unwanted access to the BDC register space during
this transition.

Signed-off-by: Danesh Petigara <danesh.petigara@broadcom.com>
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/gadget/udc/bdc/bdc_core.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/bdc/bdc_core.c b/drivers/usb/gadget/udc/bdc/bdc_core.c
index 4c557f3154460..e174b1b889da5 100644
--- a/drivers/usb/gadget/udc/bdc/bdc_core.c
+++ b/drivers/usb/gadget/udc/bdc/bdc_core.c
@@ -608,9 +608,14 @@ static int bdc_remove(struct platform_device *pdev)
 static int bdc_suspend(struct device *dev)
 {
 	struct bdc *bdc = dev_get_drvdata(dev);
+	int ret;
 
-	clk_disable_unprepare(bdc->clk);
-	return 0;
+	/* Halt the controller */
+	ret = bdc_stop(bdc);
+	if (!ret)
+		clk_disable_unprepare(bdc->clk);
+
+	return ret;
 }
 
 static int bdc_resume(struct device *dev)
-- 
2.25.1