From: Al Cooper <alcooperx@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Al Cooper <al.cooper@broadcom.com>,
Al Cooper <alcooperx@gmail.com>,
bcm-kernel-feedback-list@broadcom.com,
devicetree@vger.kernel.org,
Florian Fainelli <f.fainelli@gmail.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
linux-arm-kernel@lists.infradead.org, linux-usb@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>
Subject: [PATCH 3/3] usb: Add Kconfig and Makefile changes to build brcmstb-usb-pinmap
Date: Wed, 12 Aug 2020 16:20:18 -0400 [thread overview]
Message-ID: <20200812202018.49046-4-alcooperx@gmail.com> (raw)
In-Reply-To: <20200812202018.49046-1-alcooperx@gmail.com>
From: Al Cooper <al.cooper@broadcom.com>
Add Kconfig and Makefile changes to build brcmstb-usb-pinmap and
update MAINTAINERS for the new driver.
refs #SWLINUX-5537
Signed-off-by: Al Cooper <al.cooper@broadcom.com>
---
MAINTAINERS | 8 ++++++++
drivers/usb/host/Kconfig | 4 ++++
drivers/usb/host/Makefile | 1 +
3 files changed, 13 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index f0569cf304ca..3a44ac61899b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3527,6 +3527,14 @@ S: Maintained
F: Documentation/devicetree/bindings/usb/brcm,bcm7445-ehci.yaml
F: drivers/usb/host/ehci-brcm.*
+BROADCOM BRCMSTB USB PIN MAP DRIVER
+M: Al Cooper <alcooperx@gmail.com>
+L: linux-usb@vger.kernel.org
+L: bcm-kernel-feedback-list@broadcom.com
+S: Maintained
+F: Documentation/devicetree/bindings/usb/brcm,usb-pinmap.yaml
+F: drivers/usb/host/brcmstb-usb-pinmap.c
+
BROADCOM BRCMSTB USB2 and USB3 PHY DRIVER
M: Al Cooper <alcooperx@gmail.com>
L: linux-kernel@vger.kernel.org
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 1cb3004ea7b2..9c285053bb0c 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -109,12 +109,16 @@ endif # USB_XHCI_HCD
config USB_EHCI_BRCMSTB
tristate
+config BRCM_USB_PINMAP
+ tristate
+
config USB_BRCMSTB
tristate "Broadcom STB USB support"
depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST
select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
select USB_EHCI_BRCMSTB if USB_EHCI_HCD
select USB_XHCI_PLATFORM if USB_XHCI_HCD
+ select BRCM_USB_PINMAP
help
Enables support for XHCI, EHCI and OHCI host controllers
found in Broadcom STB SoC's.
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index bc731332fed9..0e63ef94790d 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -90,3 +90,4 @@ obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o
obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o
obj-$(CONFIG_USB_FOTG210_HCD) += fotg210-hcd.o
obj-$(CONFIG_USB_MAX3421_HCD) += max3421-hcd.o
+obj-$(CONFIG_BRCM_USB_PINMAP) += brcmstb-usb-pinmap.o
--
2.17.1
next prev parent reply other threads:[~2020-08-12 20:21 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-12 20:20 [PATCH 0/3] usb: Add driver for USB signal re-mapper Al Cooper
2020-08-12 20:20 ` [PATCH 1/3] dt-bindings: Add support for Broadcom USB pin map driver Al Cooper
2020-08-24 23:30 ` Rob Herring
2020-08-25 12:26 ` Alan Cooper
2020-08-25 15:46 ` Rob Herring
2020-08-26 16:00 ` Alan Cooper
2020-08-28 14:00 ` Linus Walleij
2020-08-28 14:18 ` Geert Uytterhoeven
2020-08-12 20:20 ` [PATCH 2/3] usb: Add driver to allow any GPIO to be used for 7211 USB signals Al Cooper
2020-08-12 20:20 ` Al Cooper [this message]
2020-08-12 21:59 ` [PATCH 3/3] usb: Add Kconfig and Makefile changes to build brcmstb-usb-pinmap kernel test robot
2020-08-13 5:40 ` Greg Kroah-Hartman
2020-08-13 15:01 ` Alan Cooper
2020-08-24 15:48 ` kernel test robot
2020-08-24 15:48 ` [RFC PATCH] usb: sync_all_pins() can be static kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200812202018.49046-4-alcooperx@gmail.com \
--to=alcooperx@gmail.com \
--cc=al.cooper@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).