Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: JC Kuo <jckuo@nvidia.com>
To: <gregkh@linuxfoundation.org>, <thierry.reding@gmail.com>,
	<robh@kernel.org>, <jonathanh@nvidia.com>, <kishon@ti.com>
Cc: <linux-tegra@vger.kernel.org>, <linux-usb@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<nkristam@nvidia.com>, JC Kuo <jckuo@nvidia.com>
Subject: [PATCH v3 11/15] phy: tegra: xusb: Tegra210 host mode VBUS control
Date: Wed, 9 Sep 2020 16:10:37 +0800
Message-ID: <20200909081041.3190157-12-jckuo@nvidia.com> (raw)
In-Reply-To: <20200909081041.3190157-1-jckuo@nvidia.com>

To support XUSB host controller ELPG, this commit moves VBUS control
.phy_power_on()/.phy_power_off() to .phy_init()/.phy_exit().
When XUSB host controller enters ELPG, host driver invokes
.phy_power_off(), VBUS should remain ON so that USB devices will not
disconnect. VBUS can be turned OFF when host driver invokes
.phy_exit() which indicates disabling a USB port.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
---
v3:
   new, was a part of "phy: tegra: xusb: Add wake/sleepwalk for Tegra210"

 drivers/phy/tegra/xusb-tegra210.c | 52 ++++++++++++++++++++++++-------
 1 file changed, 40 insertions(+), 12 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 36949039e529..0cc6b6fd8474 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -1834,8 +1834,25 @@ static int tegra210_usb2_phy_init(struct phy *phy)
 {
 	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
 	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	unsigned int index = lane->index;
+	struct tegra_xusb_usb2_port *port;
+	int err;
 	u32 value;
 
+	port = tegra_xusb_find_usb2_port(padctl, index);
+	if (!port) {
+		dev_err(&phy->dev, "no port found for USB2 lane %u\n", index);
+		return -ENODEV;
+	}
+
+	if (port->supply && port->mode == USB_DR_MODE_HOST) {
+		err = regulator_enable(port->supply);
+		if (err)
+			return err;
+	}
+
+	mutex_lock(&padctl->lock);
+
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_PAD_MUX);
 	value &= ~(XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_MASK <<
 		   XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_SHIFT);
@@ -1843,11 +1860,30 @@ static int tegra210_usb2_phy_init(struct phy *phy)
 		 XUSB_PADCTL_USB2_PAD_MUX_USB2_BIAS_PAD_SHIFT;
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_PAD_MUX);
 
+	mutex_unlock(&padctl->lock);
+
 	return 0;
 }
 
 static int tegra210_usb2_phy_exit(struct phy *phy)
 {
+	struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+	struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+	struct tegra_xusb_usb2_port *port;
+	int err;
+
+	port = tegra_xusb_find_usb2_port(padctl, lane->index);
+	if (!port) {
+		dev_err(&phy->dev, "no port found for USB2 lane %u\n", lane->index);
+		return -ENODEV;
+	}
+
+	if (port->supply && port->mode == USB_DR_MODE_HOST) {
+		err = regulator_disable(port->supply);
+		if (err)
+			return err;
+	}
+
 	return 0;
 }
 
@@ -1968,6 +2004,8 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 
 	priv = to_tegra210_xusb_padctl(padctl);
 
+	mutex_lock(&padctl->lock);
+
 	if (port->usb3_port_fake != -1) {
 		value = padctl_readl(padctl, XUSB_PADCTL_SS_PORT_MAP);
 		value &= ~XUSB_PADCTL_SS_PORT_MAP_PORTX_MAP_MASK(
@@ -2061,14 +2099,6 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 	padctl_writel(padctl, value,
 		      XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));
 
-	if (port->supply && port->mode == USB_DR_MODE_HOST) {
-		err = regulator_enable(port->supply);
-		if (err)
-			return err;
-	}
-
-	mutex_lock(&padctl->lock);
-
 	if (pad->enable > 0) {
 		pad->enable++;
 		mutex_unlock(&padctl->lock);
@@ -2077,7 +2107,7 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 
 	err = clk_prepare_enable(pad->clk);
 	if (err)
-		goto disable_regulator;
+		goto out;
 
 	value = padctl_readl(padctl, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
 	value &= ~((XUSB_PADCTL_USB2_BIAS_PAD_CTL1_TRK_START_TIMER_MASK <<
@@ -2109,8 +2139,7 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
 
 	return 0;
 
-disable_regulator:
-	regulator_disable(port->supply);
+out:
 	mutex_unlock(&padctl->lock);
 	return err;
 }
@@ -2169,7 +2198,6 @@ static int tegra210_usb2_phy_power_off(struct phy *phy)
 	padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL0);
 
 out:
-	regulator_disable(port->supply);
 	mutex_unlock(&padctl->lock);
 	return 0;
 }
-- 
2.25.1


  parent reply index

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-09  8:10 [PATCH v3 00/15] Tegra XHCI controller ELPG support JC Kuo
2020-09-09  8:10 ` [PATCH v3 01/15] clk: tegra: Add PLLE HW power sequencer control JC Kuo
2020-09-28 12:51   ` Thierry Reding
2020-09-09  8:10 ` [PATCH v3 02/15] clk: tegra: Don't enable PLLE HW sequencer at init JC Kuo
2020-09-28 12:52   ` Thierry Reding
2020-09-09  8:10 ` [PATCH v3 03/15] phy: tegra: xusb: Move usb3 port init for Tegra210 JC Kuo
2020-09-28 13:03   ` Thierry Reding
2020-09-09  8:10 ` [PATCH v3 04/15] phy: tegra: xusb: tegra210: Do not reset UPHY PLL JC Kuo
2020-09-28 13:06   ` Thierry Reding
2020-10-14  3:21     ` JC Kuo
2020-09-09  8:10 ` [PATCH v3 05/15] phy: tegra: xusb: Rearrange UPHY init on Tegra210 JC Kuo
2020-09-28 13:08   ` Thierry Reding
2020-09-09  8:10 ` [PATCH v3 06/15] phy: tegra: xusb: Add Tegra210 lane_iddq operation JC Kuo
2020-09-28 13:10   ` Thierry Reding
2020-09-09  8:10 ` [PATCH v3 07/15] phy: tegra: xusb: Add sleepwalk and suspend/resume JC Kuo
2020-09-28 13:11   ` Thierry Reding
2020-09-09  8:10 ` [PATCH v3 08/15] soc/tegra: pmc: Provide usb sleepwalk register map JC Kuo
2020-09-28 13:17   ` Thierry Reding
2020-10-14  4:08     ` JC Kuo
2020-09-09  8:10 ` [PATCH v3 09/15] arm64: tegra210: XUSB PADCTL add "nvidia,pmc" prop JC Kuo
2020-09-28 13:18   ` Thierry Reding
2020-10-14  4:15     ` JC Kuo
2020-09-09  8:10 ` [PATCH v3 10/15] phy: tegra: xusb: Add wake/sleepwalk for Tegra210 JC Kuo
2020-09-28 13:40   ` Thierry Reding
2020-10-14  8:37     ` JC Kuo
2020-09-09  8:10 ` JC Kuo [this message]
2020-09-28 13:42   ` [PATCH v3 11/15] phy: tegra: xusb: Tegra210 host mode VBUS control Thierry Reding
2020-09-09  8:10 ` [PATCH v3 12/15] phy: tegra: xusb: Add wake/sleepwalk for Tegra186 JC Kuo
2020-09-28 13:50   ` Thierry Reding
2020-10-15  8:08     ` JC Kuo
2020-09-09  8:10 ` [PATCH v3 13/15] arm64: tegra210/tegra186/tegra194: XUSB PADCTL irq JC Kuo
2020-09-09  8:10 ` [PATCH v3 14/15] usb: host: xhci-tegra: Unlink power domain devices JC Kuo
2020-09-28 13:53   ` Thierry Reding
2020-10-15  8:09     ` JC Kuo
2020-09-09  8:10 ` [PATCH v3 15/15] xhci: tegra: Enable ELPG for runtime/system PM JC Kuo
2020-09-28 14:06   ` Thierry Reding
2020-10-15  8:12     ` JC Kuo
2020-09-28 12:54 ` [PATCH v3 00/15] Tegra XHCI controller ELPG support Thierry Reding
2020-10-14  2:26   ` JC Kuo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200909081041.3190157-12-jckuo@nvidia.com \
    --to=jckuo@nvidia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jonathanh@nvidia.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nkristam@nvidia.com \
    --cc=robh@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git