Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: JC Kuo <jckuo@nvidia.com>
To: <gregkh@linuxfoundation.org>, <thierry.reding@gmail.com>,
	<robh@kernel.org>, <jonathanh@nvidia.com>, <kishon@ti.com>
Cc: <linux-tegra@vger.kernel.org>, <linux-usb@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<nkristam@nvidia.com>, JC Kuo <jckuo@nvidia.com>
Subject: [PATCH v3 02/15] clk: tegra: Don't enable PLLE HW sequencer at init
Date: Wed, 9 Sep 2020 16:10:28 +0800
Message-ID: <20200909081041.3190157-3-jckuo@nvidia.com> (raw)
In-Reply-To: <20200909081041.3190157-1-jckuo@nvidia.com>

PLLE hardware power sequencer references PEX/SATA UPHY PLL hardware
power sequencers' output to enable/disable PLLE. PLLE hardware power
sequencer has to be enabled only after PEX/SATA UPHY PLL's sequencers
are enabled.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
---
v3:
   no change

 drivers/clk/tegra/clk-pll.c | 12 ------------
 1 file changed, 12 deletions(-)

diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c
index c5cc0a2dac6f..0193cebe8c5a 100644
--- a/drivers/clk/tegra/clk-pll.c
+++ b/drivers/clk/tegra/clk-pll.c
@@ -2515,18 +2515,6 @@ static int clk_plle_tegra210_enable(struct clk_hw *hw)
 	pll_writel(val, PLLE_SS_CTRL, pll);
 	udelay(1);
 
-	val = pll_readl_misc(pll);
-	val &= ~PLLE_MISC_IDDQ_SW_CTRL;
-	pll_writel_misc(val, pll);
-
-	val = pll_readl(pll->params->aux_reg, pll);
-	val |= (PLLE_AUX_USE_LOCKDET | PLLE_AUX_SS_SEQ_INCLUDE);
-	val &= ~(PLLE_AUX_ENABLE_SWCTL | PLLE_AUX_SS_SWCTL);
-	pll_writel(val, pll->params->aux_reg, pll);
-	udelay(1);
-	val |= PLLE_AUX_SEQ_ENABLE;
-	pll_writel(val, pll->params->aux_reg, pll);
-
 out:
 	if (pll->lock)
 		spin_unlock_irqrestore(pll->lock, flags);
-- 
2.25.1


  parent reply index

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-09  8:10 [PATCH v3 00/15] Tegra XHCI controller ELPG support JC Kuo
2020-09-09  8:10 ` [PATCH v3 01/15] clk: tegra: Add PLLE HW power sequencer control JC Kuo
2020-09-28 12:51   ` Thierry Reding
2020-09-09  8:10 ` JC Kuo [this message]
2020-09-28 12:52   ` [PATCH v3 02/15] clk: tegra: Don't enable PLLE HW sequencer at init Thierry Reding
2020-09-09  8:10 ` [PATCH v3 03/15] phy: tegra: xusb: Move usb3 port init for Tegra210 JC Kuo
2020-09-28 13:03   ` Thierry Reding
2020-09-09  8:10 ` [PATCH v3 04/15] phy: tegra: xusb: tegra210: Do not reset UPHY PLL JC Kuo
2020-09-28 13:06   ` Thierry Reding
2020-10-14  3:21     ` JC Kuo
2020-09-09  8:10 ` [PATCH v3 05/15] phy: tegra: xusb: Rearrange UPHY init on Tegra210 JC Kuo
2020-09-28 13:08   ` Thierry Reding
2020-09-09  8:10 ` [PATCH v3 06/15] phy: tegra: xusb: Add Tegra210 lane_iddq operation JC Kuo
2020-09-28 13:10   ` Thierry Reding
2020-09-09  8:10 ` [PATCH v3 07/15] phy: tegra: xusb: Add sleepwalk and suspend/resume JC Kuo
2020-09-28 13:11   ` Thierry Reding
2020-09-09  8:10 ` [PATCH v3 08/15] soc/tegra: pmc: Provide usb sleepwalk register map JC Kuo
2020-09-28 13:17   ` Thierry Reding
2020-10-14  4:08     ` JC Kuo
2020-09-09  8:10 ` [PATCH v3 09/15] arm64: tegra210: XUSB PADCTL add "nvidia,pmc" prop JC Kuo
2020-09-28 13:18   ` Thierry Reding
2020-10-14  4:15     ` JC Kuo
2020-09-09  8:10 ` [PATCH v3 10/15] phy: tegra: xusb: Add wake/sleepwalk for Tegra210 JC Kuo
2020-09-28 13:40   ` Thierry Reding
2020-10-14  8:37     ` JC Kuo
2020-09-09  8:10 ` [PATCH v3 11/15] phy: tegra: xusb: Tegra210 host mode VBUS control JC Kuo
2020-09-28 13:42   ` Thierry Reding
2020-09-09  8:10 ` [PATCH v3 12/15] phy: tegra: xusb: Add wake/sleepwalk for Tegra186 JC Kuo
2020-09-28 13:50   ` Thierry Reding
2020-10-15  8:08     ` JC Kuo
2020-09-09  8:10 ` [PATCH v3 13/15] arm64: tegra210/tegra186/tegra194: XUSB PADCTL irq JC Kuo
2020-09-09  8:10 ` [PATCH v3 14/15] usb: host: xhci-tegra: Unlink power domain devices JC Kuo
2020-09-28 13:53   ` Thierry Reding
2020-10-15  8:09     ` JC Kuo
2020-09-09  8:10 ` [PATCH v3 15/15] xhci: tegra: Enable ELPG for runtime/system PM JC Kuo
2020-09-28 14:06   ` Thierry Reding
2020-10-15  8:12     ` JC Kuo
2020-09-28 12:54 ` [PATCH v3 00/15] Tegra XHCI controller ELPG support Thierry Reding
2020-10-14  2:26   ` JC Kuo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200909081041.3190157-3-jckuo@nvidia.com \
    --to=jckuo@nvidia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jonathanh@nvidia.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=nkristam@nvidia.com \
    --cc=robh@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git