Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Rob Herring <robh@kernel.org>
To: Wesley Cheng <wcheng@codeaurora.org>
Cc: sboyd@kernel.org, heikki.krogerus@linux.intel.com,
	agross@kernel.org, gregkh@linuxfoundation.org,
	bjorn.andersson@linaro.org, linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org, jackp@codeaurora.org,
	sergei.shtylyov@gmail.com
Subject: Re: [PATCH v10 2/4] dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding
Date: Tue, 13 Oct 2020 10:00:56 -0500
Message-ID: <20201013150056.GA3497815@bogus> (raw)
In-Reply-To: <20201008235934.8931-3-wcheng@codeaurora.org>

On Thu, Oct 08, 2020 at 04:59:32PM -0700, Wesley Cheng wrote:
> Introduce the dt-binding for enabling USB type C orientation and role
> detection using the PM8150B.  The driver will be responsible for receiving
> the interrupt at a state change on the CC lines, reading the
> orientation/role, and communicating this information to the remote
> clients, which can include a role switch node and a type C switch.
> 
> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
> ---
>  .../bindings/usb/qcom,pmic-typec.yaml         | 115 ++++++++++++++++++
>  1 file changed, 115 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
> 
> diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
> new file mode 100644
> index 000000000000..40e0a296f922
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
> @@ -0,0 +1,115 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/usb/qcom,pmic-typec.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Qualcomm PMIC based USB type C Detection Driver
> +
> +maintainers:
> +  - Wesley Cheng <wcheng@codeaurora.org>
> +
> +description: |
> +  Qualcomm PMIC Type C Detect
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,pm8150b-usb-typec
> +
> +  reg:
> +    maxItems: 1
> +    description: Type C base address
> +
> +  interrupts:
> +    maxItems: 1
> +    description: CC change interrupt from PMIC
> +
> +  port:
> +    description: Remote endpoint connection to the DRD switch
> +    type: object

I don't understand what this is supposed to be. You'll have to expand 
the example or provide a block diagram of what the connections/routing 
looks like.

> +
> +    properties:
> +      endpoint:
> +        description: Connection to the DRD switch being used
> +        type: object
> +
> +  connector:
> +    $ref: /connector/usb-connector.yaml#
> +    description: Connector type for remote endpoints
> +    type: object
> +
> +    properties:
> +      compatible:
> +        enum:
> +          - usb-c-connector
> +
> +      power-role: true
> +      data-role: true
> +
> +      ports:
> +        description: Remote endpoint connections for type C paths
> +        type: object
> +
> +        properties:
> +          port@1:
> +            description: Remote endpoints for the Super Speed path
> +            type: object
> +
> +            properties:
> +              endpoint:
> +                description: Connection to USB type C mux node
> +                type: object
> +
> +    required:
> +      - compatible
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - connector
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    pm8150b {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        pm8150b_typec: usb-typec@1500 {
> +            compatible = "qcom,pm8150b-usb-typec";
> +            reg = <0x1500>;
> +            interrupts = <0x2 0x15 0x5 IRQ_TYPE_EDGE_RISING>;
> +
> +            port {
> +                usb3_role: endpoint {
> +                    remote-endpoint = <&dwc3_drd_switch>;
> +                };
> +            };
> +
> +            connector {
> +                compatible = "usb-c-connector";
> +                power-role = "dual";
> +                data-role = "dual";
> +                ports {
> +                    #address-cells = <1>;
> +                    #size-cells = <0>;
> +                    port@0 {
> +                        reg = <0>;
> +                    };
> +                    port@1 {
> +                        reg = <1>;
> +                        #address-cells = <1>;
> +                        #size-cells = <0>;
> +                        usb3_data_ss: endpoint {
> +                            remote-endpoint = <&qmp_ss_mux>;
> +                        };
> +                    };
> +                };
> +            };
> +        };
> +    };
> +...
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

  reply index

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-08 23:59 [PATCH v10 0/4] Introduce PMIC based USB type C detection Wesley Cheng
2020-10-08 23:59 ` [PATCH v10 1/4] usb: typec: Add QCOM PMIC typec detection driver Wesley Cheng
2020-10-08 23:59 ` [PATCH v10 2/4] dt-bindings: usb: Add Qualcomm PMIC type C controller dt-binding Wesley Cheng
2020-10-13 15:00   ` Rob Herring [this message]
2020-10-14  8:59     ` Wesley Cheng
2020-10-08 23:59 ` [PATCH v10 3/4] arm64: boot: dts: qcom: pm8150b: Add node for USB type C block Wesley Cheng
2020-10-08 23:59 ` [PATCH v10 4/4] arm64: boot: dts: qcom: pm8150b: Add DTS node for PMIC VBUS booster Wesley Cheng
2020-10-13 15:03   ` Rob Herring
2020-10-14  9:05     ` Wesley Cheng

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201013150056.GA3497815@bogus \
    --to=robh@kernel.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=jackp@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sergei.shtylyov@gmail.com \
    --cc=wcheng@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git