Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Serge Semin <Sergey.Semin@baikalelectronics.ru>
To: Felipe Balbi <balbi@kernel.org>,
	John Youn <John.Youn@synopsys.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Felipe Balbi <felipe.balbi@linux.intel.com>,
	David Cohen <david.a.cohen@linux.intel.com>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: Serge Semin <Sergey.Semin@baikalelectronics.ru>,
	Serge Semin <fancer.lancer@gmail.com>,
	Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>,
	Pavel Parkhomenko <Pavel.Parkhomenko@baikalelectronics.ru>,
	<linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Felipe Balbi <balbi@ti.com>
Subject: [PATCH v5 1/3] usb: dwc3: ulpi: Use VStsDone to detect PHY regs access completion
Date: Thu, 10 Dec 2020 11:50:06 +0300
Message-ID: <20201210085008.13264-2-Sergey.Semin@baikalelectronics.ru> (raw)
In-Reply-To: <20201210085008.13264-1-Sergey.Semin@baikalelectronics.ru>

In accordance with [1] the DWC_usb3 core sets the GUSB2PHYACCn.VStsDone
bit when the PHY vendor control access is done and clears it when the
application initiates a new transaction. The doc doesn't say anything
about the GUSB2PHYACCn.VStsBsy flag serving for the same purpose. Moreover
we've discovered that the VStsBsy flag can be cleared before the VStsDone
bit. So using the former as a signal of the PHY control registers
completion might be dangerous. Let's have the VStsDone flag utilized
instead then.

[1] Synopsys DesignWare Cores SuperSpeed USB 3.0 xHCI Host Controller
    Databook, 2.70a, December 2013, p.388

Fixes: 88bc9d194ff6 ("usb: dwc3: add ULPI interface support")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

---

Changelog v3:
- Add Fixes tag to the commit log.
---
 drivers/usb/dwc3/core.h | 1 +
 drivers/usb/dwc3/ulpi.c | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 2f95f08ca511..1b241f937d8f 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -285,6 +285,7 @@
 
 /* Global USB2 PHY Vendor Control Register */
 #define DWC3_GUSB2PHYACC_NEWREGREQ	BIT(25)
+#define DWC3_GUSB2PHYACC_DONE		BIT(24)
 #define DWC3_GUSB2PHYACC_BUSY		BIT(23)
 #define DWC3_GUSB2PHYACC_WRITE		BIT(22)
 #define DWC3_GUSB2PHYACC_ADDR(n)	(n << 16)
diff --git a/drivers/usb/dwc3/ulpi.c b/drivers/usb/dwc3/ulpi.c
index aa213c9815f6..3cc4f4970c05 100644
--- a/drivers/usb/dwc3/ulpi.c
+++ b/drivers/usb/dwc3/ulpi.c
@@ -24,7 +24,7 @@ static int dwc3_ulpi_busyloop(struct dwc3 *dwc)
 
 	while (count--) {
 		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYACC(0));
-		if (!(reg & DWC3_GUSB2PHYACC_BUSY))
+		if (reg & DWC3_GUSB2PHYACC_DONE)
 			return 0;
 		cpu_relax();
 	}
-- 
2.29.2


  reply index

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-10  8:50 [PATCH RESEND v5 0/3] usb: dwc3: ulpi: Fix UPLI registers read/write ops Serge Semin
2020-12-10  8:50 ` Serge Semin [this message]
2020-12-10  8:50 ` [PATCH v5 2/3] usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one Serge Semin
2020-12-10  8:50 ` [PATCH v5 3/3] usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression Serge Semin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201210085008.13264-2-Sergey.Semin@baikalelectronics.ru \
    --to=sergey.semin@baikalelectronics.ru \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=John.Youn@synopsys.com \
    --cc=Pavel.Parkhomenko@baikalelectronics.ru \
    --cc=balbi@kernel.org \
    --cc=balbi@ti.com \
    --cc=david.a.cohen@linux.intel.com \
    --cc=fancer.lancer@gmail.com \
    --cc=felipe.balbi@linux.intel.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git