linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: JC Kuo <jckuo@nvidia.com>
To: <gregkh@linuxfoundation.org>, <thierry.reding@gmail.com>,
	<robh@kernel.org>, <jonathanh@nvidia.com>, <kishon@ti.com>,
	<mturquette@baylibre.com>, <sboyd@kernel.org>
Cc: <linux-tegra@vger.kernel.org>, <linux-usb@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<nkristam@nvidia.com>, <linux-clk@vger.kernel.org>,
	JC Kuo <jckuo@nvidia.com>, Thierry Reding <treding@nvidia.com>
Subject: [PATCH v7 01/14] clk: tegra: Add PLLE HW power sequencer control
Date: Wed, 20 Jan 2021 15:34:01 +0800	[thread overview]
Message-ID: <20210120073414.69208-2-jckuo@nvidia.com> (raw)
In-Reply-To: <20210120073414.69208-1-jckuo@nvidia.com>

PLLE has a hardware power sequencer logic which is a state machine
that can power on/off PLLE without any software intervention. The
sequencer has two inputs, one from XUSB UPHY PLL and the other from
SATA UPHY PLL. PLLE provides reference clock to XUSB and SATA UPHY
PLLs. When both of the downstream PLLs are powered-off, PLLE hardware
power sequencer will automatically power off PLLE for power saving.

XUSB and SATA UPHY PLLs also have their own hardware power sequencer
logic. XUSB UPHY PLL is shared between XUSB SuperSpeed ports and PCIE
controllers. The XUSB UPHY PLL hardware power sequencer has inputs
from XUSB and PCIE. When all of the XUSB SuperSpeed ports and PCIE
controllers are in low power state, XUSB UPHY PLL hardware power
sequencer automatically power off PLL and flags idle to PLLE hardware
power sequencer. Similar applies to SATA UPHY PLL.

PLLE hardware power sequencer has to be enabled after both downstream
sequencers are enabled.

This commit adds two helper functions:
1. tegra210_plle_hw_sequence_start() for XUSB PADCTL driver to enable
   PLLE hardware sequencer at proper time.

2. tegra210_plle_hw_sequence_is_enabled() for XUSB PADCTL driver to
   check whether PLLE hardware sequencer has been enabled or not.

Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
v7:
   no change
v6:
   no change
v5:
   no change
v4:
   update copyright strings
v3:
   rename 'val' with 'value

 drivers/clk/tegra/clk-tegra210.c | 53 +++++++++++++++++++++++++++++++-
 include/linux/clk/tegra.h        |  4 ++-
 2 files changed, 55 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index 68cbb98af567..b9099012dc7b 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * Copyright (c) 2012-2014 NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2012-2020 NVIDIA CORPORATION.  All rights reserved.
  */
 
 #include <linux/io.h>
@@ -403,6 +403,14 @@ static unsigned long tegra210_input_freq[] = {
 #define PLLRE_BASE_DEFAULT_MASK		0x1c000000
 #define PLLRE_MISC0_WRITE_MASK		0x67ffffff
 
+/* PLLE */
+#define PLLE_MISC_IDDQ_SW_CTRL		(1 << 14)
+#define PLLE_AUX_USE_LOCKDET		(1 << 3)
+#define PLLE_AUX_SS_SEQ_INCLUDE		(1 << 31)
+#define PLLE_AUX_ENABLE_SWCTL		(1 << 4)
+#define PLLE_AUX_SS_SWCTL		(1 << 6)
+#define PLLE_AUX_SEQ_ENABLE		(1 << 24)
+
 /* PLLX */
 #define PLLX_USE_DYN_RAMP		1
 #define PLLX_BASE_LOCK			(1 << 27)
@@ -489,6 +497,49 @@ static unsigned long tegra210_input_freq[] = {
 #define PLLU_MISC0_WRITE_MASK		0xbfffffff
 #define PLLU_MISC1_WRITE_MASK		0x00000007
 
+bool tegra210_plle_hw_sequence_is_enabled(void)
+{
+	u32 value;
+
+	value = readl_relaxed(clk_base + PLLE_AUX);
+	if (value & PLLE_AUX_SEQ_ENABLE)
+		return true;
+
+	return false;
+}
+EXPORT_SYMBOL_GPL(tegra210_plle_hw_sequence_is_enabled);
+
+int tegra210_plle_hw_sequence_start(void)
+{
+	u32 value;
+
+	if (tegra210_plle_hw_sequence_is_enabled())
+		return 0;
+
+	/* skip if PLLE is not enabled yet */
+	value = readl_relaxed(clk_base + PLLE_MISC0);
+	if (!(value & PLLE_MISC_LOCK))
+		return -EIO;
+
+	value &= ~PLLE_MISC_IDDQ_SW_CTRL;
+	writel_relaxed(value, clk_base + PLLE_MISC0);
+
+	value = readl_relaxed(clk_base + PLLE_AUX);
+	value |= (PLLE_AUX_USE_LOCKDET | PLLE_AUX_SS_SEQ_INCLUDE);
+	value &= ~(PLLE_AUX_ENABLE_SWCTL | PLLE_AUX_SS_SWCTL);
+	writel_relaxed(value, clk_base + PLLE_AUX);
+
+	fence_udelay(1, clk_base);
+
+	value |= PLLE_AUX_SEQ_ENABLE;
+	writel_relaxed(value, clk_base + PLLE_AUX);
+
+	fence_udelay(1, clk_base);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(tegra210_plle_hw_sequence_start);
+
 void tegra210_xusb_pll_hw_control_enable(void)
 {
 	u32 val;
diff --git a/include/linux/clk/tegra.h b/include/linux/clk/tegra.h
index eb016fc9cc0b..f7ff722a03dd 100644
--- a/include/linux/clk/tegra.h
+++ b/include/linux/clk/tegra.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
- * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ * Copyright (c) 2012-2020, NVIDIA CORPORATION.  All rights reserved.
  */
 
 #ifndef __LINUX_CLK_TEGRA_H_
@@ -123,6 +123,8 @@ static inline void tegra_cpu_clock_resume(void)
 }
 #endif
 
+extern int tegra210_plle_hw_sequence_start(void);
+extern bool tegra210_plle_hw_sequence_is_enabled(void);
 extern void tegra210_xusb_pll_hw_control_enable(void);
 extern void tegra210_xusb_pll_hw_sequence_start(void);
 extern void tegra210_sata_pll_hw_control_enable(void);
-- 
2.25.1


  reply	other threads:[~2021-01-20  7:35 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-20  7:34 [PATCH v7 00/14] Tegra XHCI controller ELPG support JC Kuo
2021-01-20  7:34 ` JC Kuo [this message]
2021-02-08 19:28   ` [PATCH v7 01/14] clk: tegra: Add PLLE HW power sequencer control Stephen Boyd
2021-01-20  7:34 ` [PATCH v7 02/14] clk: tegra: Don't enable PLLE HW sequencer at init JC Kuo
2021-02-08 19:28   ` Stephen Boyd
2021-01-20  7:34 ` [PATCH v7 03/14] phy: tegra: xusb: Move usb3 port init for Tegra210 JC Kuo
2021-01-20  7:34 ` [PATCH v7 04/14] phy: tegra: xusb: Rearrange UPHY init on Tegra210 JC Kuo
2021-01-20  7:34 ` [PATCH v7 05/14] phy: tegra: xusb: Add Tegra210 lane_iddq operation JC Kuo
2021-01-20  7:34 ` [PATCH v7 06/14] phy: tegra: xusb: Add sleepwalk and suspend/resume JC Kuo
2021-01-20  7:34 ` [PATCH v7 07/14] soc/tegra: pmc: Provide USB sleepwalk register map JC Kuo
2021-01-20  7:34 ` [PATCH v7 08/14] arm64: tegra210: XUSB PADCTL add "nvidia,pmc" prop JC Kuo
2021-01-20 17:35   ` Thierry Reding
2021-01-20  7:34 ` [PATCH v7 09/14] dt-bindings: phy: tegra-xusb: Add nvidia,pmc prop JC Kuo
2021-01-20 17:32   ` Thierry Reding
2021-01-20  7:34 ` [PATCH v7 10/14] phy: tegra: xusb: Add wake/sleepwalk for Tegra210 JC Kuo
2021-01-20  7:34 ` [PATCH v7 11/14] phy: tegra: xusb: Tegra210 host mode VBUS control JC Kuo
2021-01-20  7:34 ` [PATCH v7 12/14] phy: tegra: xusb: Add wake/sleepwalk for Tegra186 JC Kuo
2021-01-20  7:34 ` [PATCH v7 13/14] usb: host: xhci-tegra: Unlink power domain devices JC Kuo
2021-01-20  7:34 ` [PATCH v7 14/14] xhci: tegra: Enable ELPG for runtime/system PM JC Kuo
2021-02-05 16:15 ` [PATCH v7 00/14] Tegra XHCI controller ELPG support Thierry Reding
2021-02-05 16:22   ` Greg KH
2021-03-24 12:39     ` Thierry Reding
2021-03-24 13:32       ` Thierry Reding
2021-03-25  6:15         ` Vinod Koul
2021-03-25 14:00           ` Thierry Reding
2021-03-25 14:05             ` Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210120073414.69208-2-jckuo@nvidia.com \
    --to=jckuo@nvidia.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jonathanh@nvidia.com \
    --cc=kishon@ti.com \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-tegra@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=nkristam@nvidia.com \
    --cc=robh@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=thierry.reding@gmail.com \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).