linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Kyle Tso <kyletso@google.com>
To: linux@roeck-us.net, heikki.krogerus@linux.intel.com,
	gregkh@linuxfoundation.org, pmalani@chromium.org,
	bleung@chromium.org
Cc: bleung@google.com, badhri@google.com, linux-usb@vger.kernel.org,
	linux-kernel@vger.kernel.org, Kyle Tso <kyletso@google.com>
Subject: [PATCH] usb: pd: Reland VDO definitions of PD2.0
Date: Thu,  4 Feb 2021 08:50:36 +0800	[thread overview]
Message-ID: <20210204005036.1555294-1-kyletso@google.com> (raw)

Reland VDO definitions of PD Revision 2.0 as they are still used in
PD2.0 products.

Fixes: 0e1d6f55a12e ("usb: pd: Update VDO definitions")
Signed-off-by: Kyle Tso <kyletso@google.com>
---
 include/linux/usb/pd_vdo.h | 69 ++++++++++++++++++++++++++++++++++++--
 1 file changed, 66 insertions(+), 3 deletions(-)

diff --git a/include/linux/usb/pd_vdo.h b/include/linux/usb/pd_vdo.h
index e9b6822c54c2..5de7f550f93e 100644
--- a/include/linux/usb/pd_vdo.h
+++ b/include/linux/usb/pd_vdo.h
@@ -110,6 +110,10 @@
  * <20:16>  :: Reserved, Shall be set to zero
  * <15:0>   :: USB-IF assigned VID for this cable vendor
  */
+
+/* PD Rev2.0 definition */
+#define IDH_PTYPE_UNDEF		0
+
 /* SOP Product Type (UFP) */
 #define IDH_PTYPE_NOT_UFP	0
 #define IDH_PTYPE_HUB		1
@@ -248,7 +252,25 @@
 	 | ((pnum) & 0x1f))
 
 /*
- * Passive Cable VDO
+ * Cable VDO (for both Passive and Active Cable VDO in PD Rev2.0)
+ * ---------
+ * <31:28> :: Cable HW version
+ * <27:24> :: Cable FW version
+ * <23:20> :: Reserved, Shall be set to zero
+ * <19:18> :: type-C to Type-A/B/C/Captive (00b == A, 01 == B, 10 == C, 11 == Captive)
+ * <17>    :: Reserved, Shall be set to zero
+ * <16:13> :: cable latency (0001 == <10ns(~1m length))
+ * <12:11> :: cable termination type (11b == both ends active VCONN req)
+ * <10>    :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
+ * <9>     :: SSTX2 Directionality support
+ * <8>     :: SSRX1 Directionality support
+ * <7>     :: SSRX2 Directionality support
+ * <6:5>   :: Vbus current handling capability (01b == 3A, 10b == 5A)
+ * <4>     :: Vbus through cable (0b == no, 1b == yes)
+ * <3>     :: SOP" controller present? (0b == no, 1b == yes)
+ * <2:0>   :: USB SS Signaling support
+ *
+ * Passive Cable VDO (PD Rev3.0+)
  * ---------
  * <31:28> :: Cable HW version
  * <27:24> :: Cable FW version
@@ -264,7 +286,7 @@
  * <4:3>   :: Reserved, Shall be set to zero
  * <2:0>   :: USB highest speed
  *
- * Active Cable VDO 1
+ * Active Cable VDO 1 (PD Rev3.0+)
  * ---------
  * <31:28> :: Cable HW version
  * <27:24> :: Cable FW version
@@ -286,7 +308,9 @@
 #define CABLE_VDO_VER1_0	0
 #define CABLE_VDO_VER1_3	3
 
-/* Connector Type */
+/* Connector Type (_ATYPE and _BTYPE are for PD Rev2.0 only) */
+#define CABLE_ATYPE		0
+#define CABLE_BTYPE		1
 #define CABLE_CTYPE		2
 #define CABLE_CAPTIVE		3
 
@@ -323,12 +347,22 @@
 #define CABLE_CURR_3A		1
 #define CABLE_CURR_5A		2
 
+/* USB SuperSpeed Signaling Support (PD Rev2.0) */
+#define CABLE_USBSS_U2_ONLY	0
+#define CABLE_USBSS_U31_GEN1	1
+#define CABLE_USBSS_U31_GEN2	2
+
 /* USB Highest Speed */
 #define CABLE_USB2_ONLY		0
 #define CABLE_USB32_GEN1	1
 #define CABLE_USB32_4_GEN2	2
 #define CABLE_USB4_GEN3		3
 
+#define VDO_CABLE(hw, fw, cbl, lat, term, tx1d, tx2d, rx1d, rx2d, cur, vps, sopp, usbss) \
+	(((hw) & 0x7) << 28 | ((fw) & 0x7) << 24 | ((cbl) & 0x3) << 18		\
+	 | ((lat) & 0x7) << 13 | ((term) & 0x3) << 11 | (tx1d) << 10		\
+	 | (tx2d) << 9 | (rx1d) << 8 | (rx2d) << 7 | ((cur) & 0x3) << 5		\
+	 | (vps) << 4 | (sopp) << 3 | ((usbss) & 0x7))
 #define VDO_PCABLE(hw, fw, ver, conn, lat, term, vbm, cur, spd)			\
 	(((hw) & 0xf) << 28 | ((fw) & 0xf) << 24 | ((ver) & 0x7) << 21		\
 	 | ((conn) & 0x3) << 18 | ((lat) & 0xf) << 13 | ((term) & 0x3) << 11	\
@@ -395,6 +429,35 @@
 	 | ((hops) & 0x3) << 6 | (u2) << 5 | (u32) << 4 | (lane) << 3		\
 	 | (iso) << 2 | (gen))
 
+/*
+ * AMA VDO (PD Rev2.0)
+ * ---------
+ * <31:28> :: Cable HW version
+ * <27:24> :: Cable FW version
+ * <23:12> :: Reserved, Shall be set to zero
+ * <11>    :: SSTX1 Directionality support (0b == fixed, 1b == cfgable)
+ * <10>    :: SSTX2 Directionality support
+ * <9>     :: SSRX1 Directionality support
+ * <8>     :: SSRX2 Directionality support
+ * <7:5>   :: Vconn power
+ * <4>     :: Vconn power required
+ * <3>     :: Vbus power required
+ * <2:0>   :: USB SS Signaling support
+ */
+#define VDO_AMA(hw, fw, tx1d, tx2d, rx1d, rx2d, vcpwr, vcr, vbr, usbss) \
+	(((hw) & 0x7) << 28 | ((fw) & 0x7) << 24			\
+	 | (tx1d) << 11 | (tx2d) << 10 | (rx1d) << 9 | (rx2d) << 8	\
+	 | ((vcpwr) & 0x7) << 5 | (vcr) << 4 | (vbr) << 3		\
+	 | ((usbss) & 0x7))
+
+#define PD_VDO_AMA_VCONN_REQ(vdo)	(((vdo) >> 4) & 1)
+#define PD_VDO_AMA_VBUS_REQ(vdo)	(((vdo) >> 3) & 1)
+
+#define AMA_USBSS_U2_ONLY	0
+#define AMA_USBSS_U31_GEN1	1
+#define AMA_USBSS_U31_GEN2	2
+#define AMA_USBSS_BBONLY	3
+
 /*
  * VPD VDO
  * ---------
-- 
2.30.0.365.g02bc693789-goog


             reply	other threads:[~2021-02-04  0:51 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-02-04  0:50 Kyle Tso [this message]
2021-02-04  0:55 ` [PATCH] usb: pd: Reland VDO definitions of PD2.0 Kyle Tso
2021-02-04  6:17   ` Kyle Tso
2021-02-04  6:26     ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210204005036.1555294-1-kyletso@google.com \
    --to=kyletso@google.com \
    --cc=badhri@google.com \
    --cc=bleung@chromium.org \
    --cc=bleung@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=pmalani@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).