From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, gregkh@linuxfoundation.org, balbi@kernel.org,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
linux-rockchip@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v5 7/8] arm64: dts: rockchip: add rk3328 dwc3 usb controller node
Date: Tue, 9 Feb 2021 20:23:49 +0100 [thread overview]
Message-ID: <20210209192350.7130-7-jbx6244@gmail.com> (raw)
In-Reply-To: <20210209192350.7130-1-jbx6244@gmail.com>
From: Cameron Nemo <cnemo@tutanota.com>
RK3328 SoCs have one USB 3.0 OTG controller which uses DWC_USB3
core's general architecture. It can act as static xHCI host
controller, static device controller, USB 3.0/2.0 OTG basing
on ID of USB3.0 PHY.
Signed-off-by: William Wu <william.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Cameron Nemo <cnemo@tutanota.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
Changed V2:
remove node wrapper
---
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 4d4cd1830..a3b069a10 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -988,6 +988,25 @@
status = "disabled";
};
+ usbdrd3: usb@ff600000 {
+ compatible = "rockchip,rk3328-dwc3", "snps,dwc3";
+ reg = <0x0 0xff600000 0x0 0x100000>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
+ <&cru ACLK_USB3OTG>;
+ clock-names = "ref_clk", "suspend_clk",
+ "bus_clk";
+ dr_mode = "otg";
+ phy_type = "utmi_wide";
+ snps,dis-del-phy-power-chg-quirk;
+ snps,dis_enblslpm_quirk;
+ snps,dis-tx-ipgap-linecheck-quirk;
+ snps,dis-u2-freeclk-exists-quirk;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_u3_susphy_quirk;
+ status = "disabled";
+ };
+
gic: interrupt-controller@ff811000 {
compatible = "arm,gic-400";
#interrupt-cells = <3>;
--
2.11.0
next prev parent reply other threads:[~2021-02-09 19:45 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-09 19:23 [PATCH v5 1/8] dt-bindings: usb: convert rockchip,dwc3.txt to yaml Johan Jonker
2021-02-09 19:23 ` [PATCH v5 2/8] usb: dwc3: of-simple: bail probe if no dwc3 child node Johan Jonker
2021-03-24 16:41 ` Heiko Stübner
2021-03-24 17:21 ` Johan Jonker
2021-02-09 19:23 ` [PATCH v5 3/8] arm64: dts: rockchip: optimize clks for rk3399 dwc3 Johan Jonker
2021-02-09 19:23 ` [PATCH v5 4/8] arm64: dts: rockchip: restyle rk3399 usbdrd3_0 node Johan Jonker
2021-02-09 19:23 ` [PATCH v5 5/8] arm64: dts: rockchip: restyle rk3399 usbdrd3_1 node Johan Jonker
2021-02-09 19:23 ` [PATCH v5 6/8] dt-bindings: usb: dwc3: add description for rk3328 Johan Jonker
2021-02-10 18:43 ` Rob Herring
2021-02-09 19:23 ` Johan Jonker [this message]
2021-02-09 19:23 ` [PATCH v5 8/8] dts64: rockchip: enable dwc3 usb for A95X Z2 Johan Jonker
2021-02-10 18:43 ` [PATCH v5 1/8] dt-bindings: usb: convert rockchip,dwc3.txt to yaml Rob Herring
2021-03-25 0:50 ` (subset) " Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210209192350.7130-7-jbx6244@gmail.com \
--to=jbx6244@gmail.com \
--cc=balbi@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).