From: Matthias Kaehlcke <mka@chromium.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>,
Frank Rowand <frowand.list@gmail.com>
Cc: devicetree@vger.kernel.org, Peter Chen <peter.chen@nxp.com>,
Stephen Boyd <swboyd@chromium.org>,
Alan Stern <stern@rowland.harvard.edu>,
Ravi Chandra Sadineni <ravisadineni@chromium.org>,
Bastien Nocera <hadess@hadess.net>,
linux-kernel@vger.kernel.org,
Douglas Anderson <dianders@chromium.org>,
linux-usb@vger.kernel.org, Krzysztof Kozlowski <krzk@kernel.org>,
Matthias Kaehlcke <mka@chromium.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
linux-arm-msm@vger.kernel.org
Subject: [PATCH v5 4/4] arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
Date: Wed, 10 Feb 2021 09:10:39 -0800 [thread overview]
Message-ID: <20210210091015.v5.4.Ie0d2c1214b767bb5551dd4cad38398bd40e4466f@changeid> (raw)
In-Reply-To: <20210210171040.684659-1-mka@chromium.org>
Add nodes for the onboard USB hub on trogdor devices. Remove the
'always-on' and 'boot-on' properties from the hub regulator, since
the regulator is now managed by the onboard_usb_hub driver.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
---
Changes in v5:
- patch added to the series
.../boot/dts/qcom/sc7180-trogdor-lazor-r0.dts | 15 ++++-----------
.../boot/dts/qcom/sc7180-trogdor-lazor-r1.dts | 11 ++---------
arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts | 15 ++++-----------
arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 18 +++++++++++++++---
4 files changed, 25 insertions(+), 34 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
index 30e3e769d2b4..a557c269b998 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r0.dts
@@ -14,17 +14,6 @@ / {
compatible = "google,lazor-rev0", "qcom,sc7180";
};
-&pp3300_hub {
- /* pp3300_l7c is used to power the USB hub */
- /delete-property/regulator-always-on;
- /delete-property/regulator-boot-on;
-};
-
-&pp3300_l7c {
- regulator-always-on;
- regulator-boot-on;
-};
-
&sn65dsi86_out {
/*
* Lane 0 was incorrectly mapped on the cable, but we've now decided
@@ -33,3 +22,7 @@ &sn65dsi86_out {
*/
lane-polarities = <1 0>;
};
+
+&usb_hub_2_0 {
+ vdd-supply = <&pp3300_l7c>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
index c2ef06367baf..d182b7a231f4 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor-r1.dts
@@ -14,13 +14,6 @@ / {
compatible = "google,lazor-rev1", "google,lazor-rev2", "qcom,sc7180";
};
-&pp3300_hub {
- /* pp3300_l7c is used to power the USB hub */
- /delete-property/regulator-always-on;
- /delete-property/regulator-boot-on;
-};
-
-&pp3300_l7c {
- regulator-always-on;
- regulator-boot-on;
+&usb_hub_2_0 {
+ vdd-supply = <&pp3300_l7c>;
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
index 2cb522d6962e..699e7815697a 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-r1.dts
@@ -53,21 +53,14 @@ ap_ts: touchscreen@10 {
};
};
-&pp3300_hub {
- /* pp3300_l7c is used to power the USB hub */
- /delete-property/regulator-always-on;
- /delete-property/regulator-boot-on;
-};
-
-&pp3300_l7c {
- regulator-always-on;
- regulator-boot-on;
-};
-
&sdhc_2 {
status = "okay";
};
+&usb_hub_2_0 {
+ vdd-supply = <&pp3300_l7c>;
+};
+
/* PINCTRL - board-specific pinctrl */
&tlmm {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index 8ed7dd39f6e3..9add00cc32a5 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -203,9 +203,6 @@ pp3300_hub: pp3300-hub {
pinctrl-names = "default";
pinctrl-0 = <&en_pp3300_hub>;
- regulator-always-on;
- regulator-boot-on;
-
vin-supply = <&pp3300_a>;
};
@@ -894,6 +891,21 @@ &usb_1 {
&usb_1_dwc3 {
dr_mode = "host";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* 2.0 hub on port 1 */
+ usb_hub_2_0: hub@1 {
+ compatible = "usbbda,5411";
+ reg = <1>;
+ vdd-supply = <&pp3300_hub>;
+ };
+
+ /* 3.0 hub on port 2 */
+ usb_hub_3_0: hub@2 {
+ compatible = "usbbda,411";
+ reg = <2>;
+ };
};
&usb_1_hsphy {
--
2.30.0.478.g8a0d178c01-goog
next prev parent reply other threads:[~2021-02-10 17:12 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-10 17:10 [PATCH v5 0/4] USB: misc: Add onboard_usb_hub driver Matthias Kaehlcke
2021-02-10 17:10 ` [PATCH v5 1/4] dt-bindings: usb: Add binding for discrete onboard USB hubs Matthias Kaehlcke
2021-02-11 14:56 ` Rob Herring
2021-02-17 21:04 ` Rob Herring
2021-02-18 1:33 ` Matthias Kaehlcke
2021-02-19 15:05 ` Rob Herring
2021-02-22 17:39 ` Matthias Kaehlcke
2021-02-10 17:10 ` [PATCH v5 2/4] USB: misc: Add onboard_usb_hub driver Matthias Kaehlcke
2021-02-11 7:03 ` Greg Kroah-Hartman
2021-02-11 18:04 ` Matthias Kaehlcke
2021-02-10 17:10 ` [PATCH v5 3/4] usb: host: xhci-plat: Create platform device for onboard hubs in probe() Matthias Kaehlcke
2021-02-10 21:06 ` Krzysztof Kozlowski
2021-02-10 22:20 ` Matthias Kaehlcke
2021-02-11 19:14 ` Stephen Boyd
2021-02-11 20:36 ` Matthias Kaehlcke
2021-02-11 20:45 ` Stephen Boyd
2021-02-11 22:46 ` Rob Herring
2021-02-11 22:40 ` Rob Herring
2021-02-11 6:58 ` Greg Kroah-Hartman
2021-02-11 18:45 ` Matthias Kaehlcke
2021-02-11 19:01 ` Matthias Kaehlcke
2021-02-10 17:10 ` Matthias Kaehlcke [this message]
2021-02-10 21:04 ` [PATCH v5 0/4] USB: misc: Add onboard_usb_hub driver Krzysztof Kozlowski
2021-02-10 22:37 ` Matthias Kaehlcke
2021-02-24 13:25 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210210091015.v5.4.Ie0d2c1214b767bb5551dd4cad38398bd40e4466f@changeid \
--to=mka@chromium.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=frowand.list@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=hadess@hadess.net \
--cc=krzk@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=peter.chen@nxp.com \
--cc=ravisadineni@chromium.org \
--cc=robh+dt@kernel.org \
--cc=stern@rowland.harvard.edu \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).