Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Badhri Jagan Sridharan <badhri@google.com>
To: Guenter Roeck <linux@roeck-us.net>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Rob Herring <robh+dt@kernel.org>,
	Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Cc: linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, Kyle Tso <kyletso@google.com>,
	Badhri Jagan Sridharan <badhri@google.com>
Subject: [PATCH v2 2/6] usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply
Date: Wed,  7 Apr 2021 13:07:19 -0700
Message-ID: <20210407200723.1914388-2-badhri@google.com> (raw)
In-Reply-To: <20210407200723.1914388-1-badhri@google.com>

tcpm_pd_select_pps_apdo overwrites port->pps_data.min_volt,
port->pps_data.max_volt, port->pps_data.max_curr even before
port partner accepts the requests. This leaves incorrect values
in current_limit and supply_voltage that get exported by
"tcpm-source-psy-". Solving this problem by caching the request
values in req_min_volt, req_max_volt, req_max_curr, req_out_volt,
req_op_curr. min_volt, max_volt, max_curr gets updated once the
partner accepts the request. current_limit, supply_voltage gets updated
once local port's tcpm enters SNK_TRANSITION_SINK when the accepted
current_limit and supply_voltage is enforced.

Fixes: f2a8aa053c176 ("typec: tcpm: Represent source supply through power_supply")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
---
Changes since V1:
* Moved to kerneldoc header as suggested by Greg KH.
* Added reviewed by tags.
---
 drivers/usb/typec/tcpm/tcpm.c | 88 +++++++++++++++++++++--------------
 1 file changed, 53 insertions(+), 35 deletions(-)

diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 4ea4b30ae885..b4a40099d7e9 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -268,12 +268,27 @@ struct pd_mode_data {
 	struct typec_altmode_desc altmode_desc[ALTMODE_DISCOVERY_MAX];
 };
 
+/*
+ * @min_volt: Actual min voltage at the local port
+ * @req_min_volt: Requested min voltage to the port partner
+ * @max_volt: Actual max voltage at the local port
+ * @req_max_volt: Requested max voltage to the port partner
+ * @max_curr: Actual max current at the local port
+ * @req_max_curr: Requested max current of the port partner
+ * @req_out_volt: Requested output voltage to the port partner
+ * @req_op_curr: Requested operating current to the port partner
+ * @supported: Parter has atleast one APDO hence supports PPS
+ * @active: PPS mode is active
+ */
 struct pd_pps_data {
 	u32 min_volt;
+	u32 req_min_volt;
 	u32 max_volt;
+	u32 req_max_volt;
 	u32 max_curr;
-	u32 out_volt;
-	u32 op_curr;
+	u32 req_max_curr;
+	u32 req_out_volt;
+	u32 req_op_curr;
 	bool supported;
 	bool active;
 };
@@ -2498,8 +2513,8 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
 			break;
 		case SNK_NEGOTIATE_PPS_CAPABILITIES:
 			/* Revert data back from any requested PPS updates */
-			port->pps_data.out_volt = port->supply_voltage;
-			port->pps_data.op_curr = port->current_limit;
+			port->pps_data.req_out_volt = port->supply_voltage;
+			port->pps_data.req_op_curr = port->current_limit;
 			port->pps_status = (type == PD_CTRL_WAIT ?
 					    -EAGAIN : -EOPNOTSUPP);
 
@@ -2548,8 +2563,11 @@ static void tcpm_pd_ctrl_request(struct tcpm_port *port,
 			break;
 		case SNK_NEGOTIATE_PPS_CAPABILITIES:
 			port->pps_data.active = true;
-			port->req_supply_voltage = port->pps_data.out_volt;
-			port->req_current_limit = port->pps_data.op_curr;
+			port->pps_data.min_volt = port->pps_data.req_min_volt;
+			port->pps_data.max_volt = port->pps_data.req_max_volt;
+			port->pps_data.max_curr = port->pps_data.req_max_curr;
+			port->req_supply_voltage = port->pps_data.req_out_volt;
+			port->req_current_limit = port->pps_data.req_op_curr;
 			tcpm_set_state(port, SNK_TRANSITION_SINK, 0);
 			break;
 		case SOFT_RESET_SEND:
@@ -3108,16 +3126,16 @@ static unsigned int tcpm_pd_select_pps_apdo(struct tcpm_port *port)
 		src = port->source_caps[src_pdo];
 		snk = port->snk_pdo[snk_pdo];
 
-		port->pps_data.min_volt = max(pdo_pps_apdo_min_voltage(src),
-					      pdo_pps_apdo_min_voltage(snk));
-		port->pps_data.max_volt = min(pdo_pps_apdo_max_voltage(src),
-					      pdo_pps_apdo_max_voltage(snk));
-		port->pps_data.max_curr = min_pps_apdo_current(src, snk);
-		port->pps_data.out_volt = min(port->pps_data.max_volt,
-					      max(port->pps_data.min_volt,
-						  port->pps_data.out_volt));
-		port->pps_data.op_curr = min(port->pps_data.max_curr,
-					     port->pps_data.op_curr);
+		port->pps_data.req_min_volt = max(pdo_pps_apdo_min_voltage(src),
+						  pdo_pps_apdo_min_voltage(snk));
+		port->pps_data.req_max_volt = min(pdo_pps_apdo_max_voltage(src),
+						  pdo_pps_apdo_max_voltage(snk));
+		port->pps_data.req_max_curr = min_pps_apdo_current(src, snk);
+		port->pps_data.req_out_volt = min(port->pps_data.max_volt,
+						  max(port->pps_data.min_volt,
+						      port->pps_data.req_out_volt));
+		port->pps_data.req_op_curr = min(port->pps_data.max_curr,
+						 port->pps_data.req_op_curr);
 		power_supply_changed(port->psy);
 	}
 
@@ -3245,10 +3263,10 @@ static int tcpm_pd_build_pps_request(struct tcpm_port *port, u32 *rdo)
 			tcpm_log(port, "Invalid APDO selected!");
 			return -EINVAL;
 		}
-		max_mv = port->pps_data.max_volt;
-		max_ma = port->pps_data.max_curr;
-		out_mv = port->pps_data.out_volt;
-		op_ma = port->pps_data.op_curr;
+		max_mv = port->pps_data.req_max_volt;
+		max_ma = port->pps_data.req_max_curr;
+		out_mv = port->pps_data.req_out_volt;
+		op_ma = port->pps_data.req_op_curr;
 		break;
 	default:
 		tcpm_log(port, "Invalid PDO selected!");
@@ -3295,8 +3313,8 @@ static int tcpm_pd_build_pps_request(struct tcpm_port *port, u32 *rdo)
 	tcpm_log(port, "Requesting APDO %d: %u mV, %u mA",
 		 src_pdo_index, out_mv, op_ma);
 
-	port->pps_data.op_curr = op_ma;
-	port->pps_data.out_volt = out_mv;
+	port->pps_data.req_op_curr = op_ma;
+	port->pps_data.req_out_volt = out_mv;
 
 	return 0;
 }
@@ -5429,7 +5447,7 @@ static int tcpm_try_role(struct typec_port *p, int role)
 	return ret;
 }
 
-static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr)
+static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 req_op_curr)
 {
 	unsigned int target_mw;
 	int ret;
@@ -5447,12 +5465,12 @@ static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr)
 		goto port_unlock;
 	}
 
-	if (op_curr > port->pps_data.max_curr) {
+	if (req_op_curr > port->pps_data.max_curr) {
 		ret = -EINVAL;
 		goto port_unlock;
 	}
 
-	target_mw = (op_curr * port->pps_data.out_volt) / 1000;
+	target_mw = (req_op_curr * port->supply_voltage) / 1000;
 	if (target_mw < port->operating_snk_mw) {
 		ret = -EINVAL;
 		goto port_unlock;
@@ -5466,10 +5484,10 @@ static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr)
 	}
 
 	/* Round down operating current to align with PPS valid steps */
-	op_curr = op_curr - (op_curr % RDO_PROG_CURR_MA_STEP);
+	req_op_curr = req_op_curr - (req_op_curr % RDO_PROG_CURR_MA_STEP);
 
 	reinit_completion(&port->pps_complete);
-	port->pps_data.op_curr = op_curr;
+	port->pps_data.req_op_curr = req_op_curr;
 	port->pps_status = 0;
 	port->pps_pending = true;
 	mutex_unlock(&port->lock);
@@ -5490,7 +5508,7 @@ static int tcpm_pps_set_op_curr(struct tcpm_port *port, u16 op_curr)
 	return ret;
 }
 
-static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 out_volt)
+static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 req_out_volt)
 {
 	unsigned int target_mw;
 	int ret;
@@ -5508,13 +5526,13 @@ static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 out_volt)
 		goto port_unlock;
 	}
 
-	if (out_volt < port->pps_data.min_volt ||
-	    out_volt > port->pps_data.max_volt) {
+	if (req_out_volt < port->pps_data.min_volt ||
+	    req_out_volt > port->pps_data.max_volt) {
 		ret = -EINVAL;
 		goto port_unlock;
 	}
 
-	target_mw = (port->pps_data.op_curr * out_volt) / 1000;
+	target_mw = (port->current_limit * req_out_volt) / 1000;
 	if (target_mw < port->operating_snk_mw) {
 		ret = -EINVAL;
 		goto port_unlock;
@@ -5528,10 +5546,10 @@ static int tcpm_pps_set_out_volt(struct tcpm_port *port, u16 out_volt)
 	}
 
 	/* Round down output voltage to align with PPS valid steps */
-	out_volt = out_volt - (out_volt % RDO_PROG_VOLT_MV_STEP);
+	req_out_volt = req_out_volt - (req_out_volt % RDO_PROG_VOLT_MV_STEP);
 
 	reinit_completion(&port->pps_complete);
-	port->pps_data.out_volt = out_volt;
+	port->pps_data.req_out_volt = req_out_volt;
 	port->pps_status = 0;
 	port->pps_pending = true;
 	mutex_unlock(&port->lock);
@@ -5589,8 +5607,8 @@ static int tcpm_pps_activate(struct tcpm_port *port, bool activate)
 
 	/* Trigger PPS request or move back to standard PDO contract */
 	if (activate) {
-		port->pps_data.out_volt = port->supply_voltage;
-		port->pps_data.op_curr = port->current_limit;
+		port->pps_data.req_out_volt = port->supply_voltage;
+		port->pps_data.req_op_curr = port->current_limit;
 	}
 	mutex_unlock(&port->lock);
 
-- 
2.31.1.295.g9ea45b61b8-goog


  reply index

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-07 20:07 [PATCH v2 1/6] usb: typec: tcpm: Address incorrect values of tcpm psy for fixed supply Badhri Jagan Sridharan
2021-04-07 20:07 ` Badhri Jagan Sridharan [this message]
2021-04-08  6:59   ` [PATCH v2 2/6] usb: typec: tcpm: Address incorrect values of tcpm psy for pps supply Heikki Krogerus
2021-04-10  2:10   ` Guenter Roeck
2021-04-07 20:07 ` [PATCH v2 3/6] usb: typec: tcpm: update power supply once partner accepts Badhri Jagan Sridharan
2021-04-08  7:09   ` Heikki Krogerus
2021-04-10  2:10   ` Guenter Roeck
2021-04-07 20:07 ` [PATCH v2 4/6] usb: typec: tcpm: Honour pSnkStdby requirement during negotiation Badhri Jagan Sridharan
2021-04-08  7:47   ` Heikki Krogerus
2021-04-14  0:58     ` Badhri Jagan Sridharan
2021-04-10  2:11   ` Guenter Roeck
2021-04-07 20:07 ` [PATCH v2 5/6] usb: typec: tcpm: Allow slow charging loops to comply to pSnkStby Badhri Jagan Sridharan
2021-04-08  8:14   ` Heikki Krogerus
2021-04-08  8:22     ` Heikki Krogerus
2021-04-14  0:59       ` Badhri Jagan Sridharan
2021-04-07 20:07 ` [PATCH v2 6/6] Documentation: connector: Add slow-charger-loop definition Badhri Jagan Sridharan
2021-04-09 18:38   ` Rob Herring
2021-04-14  1:27     ` Badhri Jagan Sridharan
2021-04-08  6:51 ` [PATCH v2 1/6] usb: typec: tcpm: Address incorrect values of tcpm psy for fixed supply Heikki Krogerus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210407200723.1914388-2-badhri@google.com \
    --to=badhri@google.com \
    --cc=Adam.Thomson.Opensource@diasemi.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=kyletso@google.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git