[PATCH v3 07/14] usb: dwc2: Add exit partial power down when port is resumed

From: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
To: Felipe Balbi <balbi@kernel.org>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: John Youn <John.Youn@synopsys.com>,
	Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
Subject: [PATCH v3 07/14] usb: dwc2: Add exit partial power down when port is resumed
Date: Thu, 08 Apr 2021 13:45:17 +0400	[thread overview]
Message-ID: <20210408094518.6DA1DA022E@mailhost.synopsys.com> (raw)
In-Reply-To: <cover.1617782102.git.Arthur.Petrosyan@synopsys.com>

Added flow of exiting Partial Power Down in
"dwc2_port_resume()" function when core receives resume.

NOTE: Switch case statement is used for hibernation partial
power down and clock gating mode determination. In this patch
only Partial Power Down is implemented the Hibernation and
clock gating implementations are planned to be added.

Signed-off-by: Artur Petrosyan <Arthur.Petrosyan@synopsys.com>
---
 Changes in v3:
 - None
 Changes in v2:
 - None

 drivers/usb/dwc2/core.h |  5 ++--
 drivers/usb/dwc2/hcd.c  | 61 ++++++++++++++++++++++++++---------------
 2 files changed, 42 insertions(+), 24 deletions(-)

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 76807abd753b..5a7850482e57 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -1471,7 +1471,7 @@ void dwc2_hcd_disconnect(struct dwc2_hsotg *hsotg, bool force);
 void dwc2_hcd_start(struct dwc2_hsotg *hsotg);
 int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup);
 int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex);
-void dwc2_port_resume(struct dwc2_hsotg *hsotg);
+int dwc2_port_resume(struct dwc2_hsotg *hsotg);
 int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg);
 int dwc2_restore_host_registers(struct dwc2_hsotg *hsotg);
 int dwc2_host_enter_hibernation(struct dwc2_hsotg *hsotg);
@@ -1497,7 +1497,8 @@ static inline int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup)
 { return 0; }
 static inline int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex)
 { return 0; }
-static inline void dwc2_port_resume(struct dwc2_hsotg *hsotg) {}
+static inline int dwc2_port_resume(struct dwc2_hsotg *hsotg)
+{ return 0; }
 static inline int dwc2_hcd_init(struct dwc2_hsotg *hsotg)
 { return 0; }
 static inline int dwc2_backup_host_registers(struct dwc2_hsotg *hsotg)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index e7fb0d5940bc..720354df014b 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -3353,44 +3353,61 @@ int dwc2_port_suspend(struct dwc2_hsotg *hsotg, u16 windex)
  *
  * @hsotg: Programming view of the DWC_otg controller
  *
+ * Return: non-zero if failed to exit suspend mode for host.
+ *
  * This function is for exiting Host mode suspend.
  * Must NOT be called with interrupt disabled or spinlock held.
  */
-void dwc2_port_resume(struct dwc2_hsotg *hsotg)
+int dwc2_port_resume(struct dwc2_hsotg *hsotg)
 {
 	unsigned long flags;
 	u32 hprt0;
 	u32 pcgctl;
+	int ret = 0;
 
 	spin_lock_irqsave(&hsotg->lock, flags);
 
-	/*
-	 * If power_down is supported, Phy clock is already resumed
-	 * after registers restore.
-	 */
-	if (!hsotg->params.power_down) {
-		pcgctl = dwc2_readl(hsotg, PCGCTL);
-		pcgctl &= ~PCGCTL_STOPPCLK;
-		dwc2_writel(hsotg, pcgctl, PCGCTL);
+	switch (hsotg->params.power_down) {
+	case DWC2_POWER_DOWN_PARAM_PARTIAL:
+		ret = dwc2_exit_partial_power_down(hsotg, 0, true);
+		if (ret)
+			dev_err(hsotg->dev,
+				"exit partial_power_down failed.\n");
+		break;
+	case DWC2_POWER_DOWN_PARAM_HIBERNATION:
+	case DWC2_POWER_DOWN_PARAM_NONE:
+	default:
+		/*
+		 * If power_down is supported, Phy clock is already resumed
+		 * after registers restore.
+		 */
+		if (!hsotg->params.power_down) {
+			pcgctl = dwc2_readl(hsotg, PCGCTL);
+			pcgctl &= ~PCGCTL_STOPPCLK;
+			dwc2_writel(hsotg, pcgctl, PCGCTL);
+			spin_unlock_irqrestore(&hsotg->lock, flags);
+			msleep(20);
+			spin_lock_irqsave(&hsotg->lock, flags);
+		}
+
+		hprt0 = dwc2_read_hprt0(hsotg);
+		hprt0 |= HPRT0_RES;
+		hprt0 &= ~HPRT0_SUSP;
+		dwc2_writel(hsotg, hprt0, HPRT0);
 		spin_unlock_irqrestore(&hsotg->lock, flags);
-		msleep(20);
+
+		msleep(USB_RESUME_TIMEOUT);
+
 		spin_lock_irqsave(&hsotg->lock, flags);
+		hprt0 = dwc2_read_hprt0(hsotg);
+		hprt0 &= ~(HPRT0_RES | HPRT0_SUSP);
+		dwc2_writel(hsotg, hprt0, HPRT0);
+		hsotg->bus_suspended = false;
 	}
 
-	hprt0 = dwc2_read_hprt0(hsotg);
-	hprt0 |= HPRT0_RES;
-	hprt0 &= ~HPRT0_SUSP;
-	dwc2_writel(hsotg, hprt0, HPRT0);
 	spin_unlock_irqrestore(&hsotg->lock, flags);
 
-	msleep(USB_RESUME_TIMEOUT);
-
-	spin_lock_irqsave(&hsotg->lock, flags);
-	hprt0 = dwc2_read_hprt0(hsotg);
-	hprt0 &= ~(HPRT0_RES | HPRT0_SUSP);
-	dwc2_writel(hsotg, hprt0, HPRT0);
-	hsotg->bus_suspended = false;
-	spin_unlock_irqrestore(&hsotg->lock, flags);
+	return ret;
 }
 
 /* Handles hub class-specific requests */
-- 
2.25.1

