Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH] usb: dwc2: Enable RPi in ACPI mode
@ 2021-04-08  3:21 jlinton
  2021-04-08  6:03 ` kernel test robot
  2021-04-09  2:55 ` kernel test robot
  0 siblings, 2 replies; 3+ messages in thread
From: jlinton @ 2021-04-08  3:21 UTC (permalink / raw)
  To: linux-usb; +Cc: gregkh, hminas, linux-kernel, Jeremy Linton

From: Jeremy Linton <jeremy.linton@arm.com>

The dwc2 driver has everything we need to run
in ACPI mode except for the ACPI module device table
boilerplate. With that added and identified as "BCM2848",
an id in use by other OSs for this device, the dw2
controller on the BCM2711 will work.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
---
 drivers/usb/dwc2/core.h     |  2 ++
 drivers/usb/dwc2/params.c   | 14 ++++++++++++++
 drivers/usb/dwc2/platform.c |  1 +
 3 files changed, 17 insertions(+)

diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
index 7161344c6522..defc6034af49 100644
--- a/drivers/usb/dwc2/core.h
+++ b/drivers/usb/dwc2/core.h
@@ -38,6 +38,7 @@
 #ifndef __DWC2_CORE_H__
 #define __DWC2_CORE_H__
 
+#include <linux/acpi.h>
 #include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
 #include <linux/usb/gadget.h>
@@ -1339,6 +1340,7 @@ irqreturn_t dwc2_handle_common_intr(int irq, void *dev);
 
 /* The device ID match table */
 extern const struct of_device_id dwc2_of_match_table[];
+extern const struct acpi_device_id dwc2_acpi_match[];
 
 int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg);
 int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg);
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index 92df3d620f7d..127878a0a397 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -232,6 +232,12 @@ const struct of_device_id dwc2_of_match_table[] = {
 };
 MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
 
+const struct acpi_device_id dwc2_acpi_match[] = {
+	{ "BCM2848", dwc2_set_bcm_params },
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, dwc2_acpi_match);
+
 static void dwc2_set_param_otg_cap(struct dwc2_hsotg *hsotg)
 {
 	u8 val;
@@ -878,6 +884,14 @@ int dwc2_init_params(struct dwc2_hsotg *hsotg)
 	if (match && match->data) {
 		set_params = match->data;
 		set_params(hsotg);
+	} else {
+		struct acpi_device_id *amatch;
+
+		amatch = acpi_match_device(dwc2_acpi_match, hsotg->dev);
+		if (amatch && amatch->driver_data) {
+			set_params = amatch->driver_data;
+			set_params(hsotg);
+		}
 	}
 
 	dwc2_check_params(hsotg);
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 5f18acac7406..53fc6bc3ed1a 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -734,6 +734,7 @@ static struct platform_driver dwc2_platform_driver = {
 	.driver = {
 		.name = dwc2_driver_name,
 		.of_match_table = dwc2_of_match_table,
+		.acpi_match_table = ACPI_PTR(dwc2_acpi_match),
 		.pm = &dwc2_dev_pm_ops,
 	},
 	.probe = dwc2_driver_probe,
-- 
2.26.2


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, back to index

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-08  3:21 [PATCH] usb: dwc2: Enable RPi in ACPI mode jlinton
2021-04-08  6:03 ` kernel test robot
2021-04-09  2:55 ` kernel test robot

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git