Re: [PATCH 35/54] dt-bindings: usb: dwc3: Fix usb-phy check

[Rob Herring <robh@kernel.org>]

On Wed, Jul 21, 2021 at 04:04:05PM +0200, Maxime Ripard wrote:
> The original binding was allowing any combination of usb2-phy and
> usb3-phy in the phys and phy-names properties.
> 
> However, the current binding enforces that those properties must be a
> list of usb2-phy and usb3-phy, with exactly one element, effectively
> making usb2-phy the only value being valid.

Huh? If 'maxItems' is not specified, then it's the length of 'items' 
list.

> Let's rework the properties description to allow either one or two
> element picked with values either usb2-phy or usb3-phy. The rest of the
> tooling makes sure that we don't get any duplicate value, so this should
> be what we want.

Is it really valid to have only a USB3 PHY and what you want here? That 
would mean the USB3 phy also handles USB2, right?

> 
> Cc: Felipe Balbi <balbi@kernel.org>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: linux-usb@vger.kernel.org
> Signed-off-by: Maxime Ripard <maxime@cerno.tech>
> ---
>  Documentation/devicetree/bindings/usb/snps,dwc3.yaml | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> index 41416fbd92aa..6c3f7c9a76c0 100644
> --- a/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> +++ b/Documentation/devicetree/bindings/usb/snps,dwc3.yaml
> @@ -73,15 +73,15 @@ properties:
>  
>    phys:
>      minItems: 1
> -    items:
> -      - description: USB2/HS PHY
> -      - description: USB3/SS PHY
> +    maxItems: 2
>  
>    phy-names:
>      minItems: 1
> +    maxItems: 2
>      items:
> -      - const: usb2-phy
> -      - const: usb3-phy
> +      enum:
> +        - usb2-phy
> +        - usb3-phy
>  
>    resets:
>      minItems: 1
> -- 
> 2.31.1
> 
>