From: Sungbo Eo <mans0n@gorani.run>
To: linux-mediatek@lists.infradead.org
Cc: Rob Herring <robh+dt@kernel.org>,
Matthias Brugger <matthias.bgg@gmail.com>, Bin Liu <b-liu@ti.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Frank Wunderlich <frank-w@public-files.de>,
devicetree@vger.kernel.org, linux-usb@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Sungbo Eo <mans0n@gorani.run>
Subject: [PATCH v4 1/2] arm: dts: mt7623: add musb device nodes
Date: Tue, 31 Aug 2021 00:59:02 +0900 [thread overview]
Message-ID: <20210830155903.13907-2-mans0n@gorani.run> (raw)
In-Reply-To: <20210830155903.13907-1-mans0n@gorani.run>
MT7623 has an musb controller that is compatible with the one from MT2701.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Tested-by: Frank Wunderlich <frank-w@public-files.de>
---
v4:
* add tested by Frank
v3:
* remove unnecessary status=okay from u2port2
v2:
* rename usb3 label to usb0
* move usb0 & u2phy1 nodes to the right sorted place
* disable u2phy1 by default
* correct u2port2 node name to match its reg address
---
arch/arm/boot/dts/mt7623.dtsi | 33 +++++++++++++++++++++++++++++++++
arch/arm/boot/dts/mt7623a.dtsi | 4 ++++
2 files changed, 37 insertions(+)
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index 3c11f7cfcc40..21c8a291b74e 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -585,6 +585,39 @@ spi2: spi@11017000 {
status = "disabled";
};
+ usb0: usb@11200000 {
+ compatible = "mediatek,mt7623-musb",
+ "mediatek,mtk-musb";
+ reg = <0 0x11200000 0 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "mc";
+ phys = <&u2port2 PHY_TYPE_USB2>;
+ dr_mode = "otg";
+ clocks = <&pericfg CLK_PERI_USB0>,
+ <&pericfg CLK_PERI_USB0_MCU>,
+ <&pericfg CLK_PERI_USB_SLV>;
+ clock-names = "main","mcu","univpll";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+ status = "disabled";
+ };
+
+ u2phy1: t-phy@11210000 {
+ compatible = "mediatek,mt7623-tphy",
+ "mediatek,generic-tphy-v1";
+ reg = <0 0x11210000 0 0x0800>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ u2port2: usb-phy@11210800 {
+ reg = <0 0x11210800 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ };
+ };
+
audsys: clock-controller@11220000 {
compatible = "mediatek,mt7623-audsys",
"mediatek,mt2701-audsys",
diff --git a/arch/arm/boot/dts/mt7623a.dtsi b/arch/arm/boot/dts/mt7623a.dtsi
index 0735a1fb8ad9..d304b62d24b5 100644
--- a/arch/arm/boot/dts/mt7623a.dtsi
+++ b/arch/arm/boot/dts/mt7623a.dtsi
@@ -35,6 +35,10 @@ &scpsys {
clock-names = "ethif";
};
+&usb0 {
+ power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
&usb1 {
power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
};
--
2.33.0
next prev parent reply other threads:[~2021-08-30 15:59 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-03 15:13 [PATCH 0/2] Add MUSB for MT7623 Sungbo Eo
2021-08-03 15:13 ` [PATCH 1/2] dt-bindings: usb: mtk-musb: add MT7623 compatible Sungbo Eo
2021-08-04 15:01 ` Matthias Brugger
2021-08-03 15:13 ` [PATCH 2/2] arm: dts: mt7623: add musb device nodes Sungbo Eo
2021-08-03 17:15 ` Aw: [PATCH 0/2] Add MUSB for MT7623 Frank Wunderlich
2021-08-04 0:14 ` Sungbo Eo
2021-08-04 8:11 ` Aw: " Frank Wunderlich
2021-08-05 1:34 ` Sungbo Eo
2021-08-04 11:33 ` Frank Wunderlich
2021-08-04 15:01 ` Matthias Brugger
2021-08-05 1:36 ` Sungbo Eo
2021-08-08 12:38 ` [PATCH v2 " Sungbo Eo
2021-08-08 12:38 ` [PATCH v2 1/2] dt-bindings: usb: mtk-musb: add MT7623 compatible Sungbo Eo
2021-08-13 20:49 ` Rob Herring
2021-08-08 12:38 ` [PATCH v2 2/2] arm: dts: mt7623: add musb device nodes Sungbo Eo
2021-08-13 20:48 ` Rob Herring
2021-08-22 4:13 ` [PATCH v3 0/1] Add MUSB for MT7623 Sungbo Eo
2021-08-22 4:13 ` [PATCH v3 1/1] arm: dts: mt7623: add musb device nodes Sungbo Eo
2021-08-30 15:17 ` Aw: " Frank Wunderlich
2021-08-30 15:59 ` [PATCH v4 0/2] Add MUSB for MT7623 Sungbo Eo
2021-08-30 15:59 ` Sungbo Eo [this message]
2021-08-31 6:27 ` [PATCH v4 1/2] arm: dts: mt7623: add musb device nodes Chunfeng Yun (云春峰)
2021-08-31 8:59 ` Frank Wunderlich
2021-08-31 11:02 ` Sungbo Eo
2021-08-31 11:08 ` Aw: " Frank Wunderlich
2021-09-20 10:48 ` Aw: " Frank Wunderlich
2021-09-20 12:01 ` Matthias Brugger
2021-08-30 15:59 ` [PATCH v4 2/2] usb: musb: mediatek: Expose role-switch control to userspace Sungbo Eo
2021-08-31 6:15 ` Chunfeng Yun (云春峰)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210830155903.13907-2-mans0n@gorani.run \
--to=mans0n@gorani.run \
--cc=b-liu@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=frank-w@public-files.de \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=linux-usb@vger.kernel.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).