linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Xu Yang <xu.yang_2@nxp.com>
To: linux@roeck-us.net, heikki.krogerus@linux.intel.com
Cc: gregkh@linuxfoundation.org, linux-usb@vger.kernel.org,
	jun.li@nxp.com, linux-imx@nxp.com
Subject: [PATCH v2] usb: typec: tcpci: don't touch CC line if it's Vconn source
Date: Wed, 12 Jan 2022 17:41:16 +0800	[thread overview]
Message-ID: <20220112094116.616272-1-xu.yang_2@nxp.com> (raw)

With the AMS and Collision Avoidance, tcpm often needs to change the CC's
termination. When one CC line is souring Vconn, if we still change its
termination, the voltage of the another CC line is likely to be fluctuant
and unstable.

Therefore, we should verify whether a CC line is soucing Vconn before
changing its termination. And only changing the termination that is
not a Vconn line. This can be done by reading the VCONN Present bit of
POWER_ STATUS register. To determinate the polarity, we can read the
Plug Orientation bit of TCPC_CONTROL register. Since only if Plug
Orientation is set, Vconn can be sourced.

Fixes: 0908c5aca31e ("usb: typec: tcpm: AMS and Collision Avoidance")
cc: <stable@vger.kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>

---
v2: changed subject line
---
 drivers/usb/typec/tcpm/tcpci.c | 27 +++++++++++++++++++++++++++
 drivers/usb/typec/tcpm/tcpci.h |  1 +
 2 files changed, 28 insertions(+)

diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c
index 35a1307349a2..0bf4cbfaa21c 100644
--- a/drivers/usb/typec/tcpm/tcpci.c
+++ b/drivers/usb/typec/tcpm/tcpci.c
@@ -75,9 +75,26 @@ static int tcpci_write16(struct tcpci *tcpci, unsigned int reg, u16 val)
 static int tcpci_set_cc(struct tcpc_dev *tcpc, enum typec_cc_status cc)
 {
 	struct tcpci *tcpci = tcpc_to_tcpci(tcpc);
+	bool vconn_pres = false;
+	enum typec_cc_polarity polarity = TYPEC_POLARITY_CC1;
 	unsigned int reg;
 	int ret;
 
+	ret = regmap_read(tcpci->regmap, TCPC_POWER_STATUS, &reg);
+	if (ret < 0)
+		return ret;
+
+	if (reg & TCPC_POWER_STATUS_VCONN_PRES) {
+		vconn_pres = true;
+
+		ret = regmap_read(tcpci->regmap, TCPC_TCPC_CTRL, &reg);
+		if (ret < 0)
+			return ret;
+
+		if (reg & TCPC_TCPC_CTRL_ORIENTATION)
+			polarity = TYPEC_POLARITY_CC2;
+	}
+
 	switch (cc) {
 	case TYPEC_CC_RA:
 		reg = (TCPC_ROLE_CTRL_CC_RA << TCPC_ROLE_CTRL_CC1_SHIFT) |
@@ -112,6 +129,16 @@ static int tcpci_set_cc(struct tcpc_dev *tcpc, enum typec_cc_status cc)
 		break;
 	}
 
+	if (vconn_pres) {
+		if (polarity == TYPEC_POLARITY_CC2) {
+			reg &= ~(TCPC_ROLE_CTRL_CC1_MASK << TCPC_ROLE_CTRL_CC1_SHIFT);
+			reg |= (TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC1_SHIFT);
+		} else {
+			reg &= ~(TCPC_ROLE_CTRL_CC2_MASK << TCPC_ROLE_CTRL_CC2_SHIFT);
+			reg |= (TCPC_ROLE_CTRL_CC_OPEN << TCPC_ROLE_CTRL_CC2_SHIFT);
+		}
+	}
+
 	ret = regmap_write(tcpci->regmap, TCPC_ROLE_CTRL, reg);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/usb/typec/tcpm/tcpci.h b/drivers/usb/typec/tcpm/tcpci.h
index 2be7a77d400e..b2edd45f13c6 100644
--- a/drivers/usb/typec/tcpm/tcpci.h
+++ b/drivers/usb/typec/tcpm/tcpci.h
@@ -98,6 +98,7 @@
 #define TCPC_POWER_STATUS_SOURCING_VBUS	BIT(4)
 #define TCPC_POWER_STATUS_VBUS_DET	BIT(3)
 #define TCPC_POWER_STATUS_VBUS_PRES	BIT(2)
+#define TCPC_POWER_STATUS_VCONN_PRES	BIT(1)
 #define TCPC_POWER_STATUS_SINKING_VBUS	BIT(0)
 
 #define TCPC_FAULT_STATUS		0x1f
-- 
2.25.1


             reply	other threads:[~2022-01-12  9:46 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-01-12  9:41 Xu Yang [this message]
2022-01-12 11:04 ` [PATCH v2] usb: typec: tcpci: don't touch CC line if it's Vconn source Heikki Krogerus
2022-01-12 16:00 ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220112094116.616272-1-xu.yang_2@nxp.com \
    --to=xu.yang_2@nxp.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=jun.li@nxp.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@roeck-us.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).