[PATCH v2] HID: usbhid: set mouse as a wakeup resource

[Mario Limonciello <mario.limonciello@amd.com>]

The USB HID transport layer doesn't set mice for wakeup by default so users
can not wake system from s2idle using wired USB mouse. However, users can
wake the same system from Modern Standby on Windows with the same wired
USB mouse.

Microsoft documentation indicates that all USB mice and touchpads should
be waking the system from Modern Standby. To align expectations from users
make this behavior the same when the system is configured by the OEM and
the user to use s2idle in Linux.

Link: https://docs.microsoft.com/en-us/windows-hardware/design/device-experiences/modern-standby-wake-sources#input-devices-1
Link: https://lore.kernel.org/linux-usb/20220404214557.3329796-1-richard.gong@amd.com/
Suggested-by: Richard Gong <richard.gong@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
---
More people keep coming to us confused that they couldn't wake a Linux system
up from sleep using a mouse, so this patch is being revived.

Microsoft documentation doesn't indicate any allowlist for this behavior, and
they actually prescribe it for all USB mice and touchpads.
v1->v2:
 * Resubmit by Mario
 * Update commit message
 * Only activate on systems configured by user and OEM for using s2idle

 drivers/hid/usbhid/hid-core.c | 36 ++++++++++++++++++++++++-----------
 1 file changed, 25 insertions(+), 11 deletions(-)

diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 4490e2f7252a..3a1214ecec49 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -12,6 +12,7 @@
 /*
  */
 
+#include <linux/acpi.h>
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/init.h>
@@ -26,6 +27,7 @@
 #include <linux/wait.h>
 #include <linux/workqueue.h>
 #include <linux/string.h>
+#include <linux/suspend.h>
 
 #include <linux/usb.h>
 
@@ -1176,17 +1178,29 @@ static int usbhid_start(struct hid_device *hid)
 		usb_autopm_put_interface(usbhid->intf);
 	}
 
-	/* Some keyboards don't work until their LEDs have been set.
-	 * Since BIOSes do set the LEDs, it must be safe for any device
-	 * that supports the keyboard boot protocol.
-	 * In addition, enable remote wakeup by default for all keyboard
-	 * devices supporting the boot protocol.
-	 */
-	if (interface->desc.bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT &&
-			interface->desc.bInterfaceProtocol ==
-				USB_INTERFACE_PROTOCOL_KEYBOARD) {
-		usbhid_set_leds(hid);
-		device_set_wakeup_enable(&dev->dev, 1);
+	if (interface->desc.bInterfaceSubClass == USB_INTERFACE_SUBCLASS_BOOT) {
+		switch (interface->desc.bInterfaceProtocol) {
+		/* Some keyboards don't work until their LEDs have been set.
+		 * Since BIOSes do set the LEDs, it must be safe for any device
+		 * that supports the keyboard boot protocol.
+		 * In addition, enable remote wakeup by default for all keyboard
+		 * devices supporting the boot protocol.
+		 */
+		case USB_INTERFACE_PROTOCOL_KEYBOARD:
+			usbhid_set_leds(hid);
+			device_set_wakeup_enable(&dev->dev, 1);
+			break;
+#ifdef CONFIG_ACPI
+		/* Setup remote wakeup by default for mice supporting boot
+		 * protocol if the system supports s2idle
+		 */
+		case USB_INTERFACE_PROTOCOL_MOUSE:
+			if (acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0 &&
+			    pm_suspend_default_s2idle())
+				device_set_wakeup_enable(&dev->dev, 1);
+			break;
+#endif
+		}
 	}
 
 	mutex_unlock(&usbhid->mutex);
-- 
2.34.1