[ 0.000000] Linux version 6.3.0-rc3-bdver2-dirty (root@outsider) (clang version 15.0.7, LLD 15.0.7) #2 SMP Sun Mar 26 17:39:00 CEST 2023 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc3-bdver2-dirty root=/dev/nvme0n1p4 ro psmouse.synaptics_intertouch=1 zswap.max_pool_percent=16 zswap.zpool=z3fold slub_debug=FZP page_poison=1 netconsole=6666@10.0.0.14/eth0,6666@10.0.0.3/70:85:C2:30:EC:01 [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce1fefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ce1ff000-0x00000000ce240fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ce241000-0x00000000ce250fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000ce251000-0x00000000ce640fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000ce641000-0x00000000cf0f1fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000cf0f2000-0x00000000cf155fff] type 20 [ 0.000000] BIOS-e820: [mem 0x00000000cf156000-0x00000000cf156fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000cf157000-0x00000000cf35cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000cf35d000-0x00000000cf7fffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000082effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] efi: EFI v2.3.1 by American Megatrends [ 0.000000] efi: ACPI=0xce249000 ACPI 2.0=0xce249000 SMBIOS=0xf04c0 [ 0.000000] efi: Remove mem44: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map [ 0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved [ 0.000000] efi: Not removing mem45: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem46: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem47: MMIO range=[0xfec20000-0xfec20fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem48: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map [ 0.000000] efi: Not removing mem49: MMIO range=[0xfed61000-0xfed70fff] (64KB) from e820 map [ 0.000000] efi: Not removing mem50: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map [ 0.000000] efi: Remove mem51: MMIO range=[0xfef00000-0xffffffff] (17MB) from e820 map [ 0.000000] e820: remove [mem 0xfef00000-0xffffffff] reserved [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970-GAMING, BIOS F2 04/06/2016 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 4018.800 MHz processor [ 0.001013] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001037] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001059] last_pfn = 0x82f000 max_arch_pfn = 0x400000000 [ 0.001079] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001734] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved [ 0.001741] last_pfn = 0xcf800 max_arch_pfn = 0x400000000 [ 0.001759] Using GB pages for direct mapping [ 0.002304] Secure boot disabled [ 0.002306] ACPI: Early table checksum verification disabled [ 0.002310] ACPI: RSDP 0x00000000CE249000 000024 (v02 ALASKA) [ 0.002314] ACPI: XSDT 0x00000000CE249070 00005C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.002319] ACPI: FACP 0x00000000CE24E998 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.002323] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-615) [ 0.002327] ACPI: DSDT 0x00000000CE249158 005839 (v02 ALASKA A M I 00000088 INTL 20051117) [ 0.002330] ACPI: FACS 0x00000000CE63BF80 000040 [ 0.002333] ACPI: APIC 0x00000000CE24EA90 00009E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.002336] ACPI: FPDT 0x00000000CE24EB30 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.002338] ACPI: MCFG 0x00000000CE24EB78 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.002341] ACPI: HPET 0x00000000CE24EBB8 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.002344] ACPI: SSDT 0x00000000CE24EBF0 001714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.002347] ACPI: IVRS 0x00000000CE250308 0000D8 (v01 AMD RD890S 00202031 AMD 00000000) [ 0.002349] ACPI: Reserving FACP table memory at [mem 0xce24e998-0xce24ea8b] [ 0.002351] ACPI: Reserving DSDT table memory at [mem 0xce249158-0xce24e990] [ 0.002352] ACPI: Reserving FACS table memory at [mem 0xce63bf80-0xce63bfbf] [ 0.002353] ACPI: Reserving APIC table memory at [mem 0xce24ea90-0xce24eb2d] [ 0.002354] ACPI: Reserving FPDT table memory at [mem 0xce24eb30-0xce24eb73] [ 0.002355] ACPI: Reserving MCFG table memory at [mem 0xce24eb78-0xce24ebb3] [ 0.002356] ACPI: Reserving HPET table memory at [mem 0xce24ebb8-0xce24ebef] [ 0.002357] ACPI: Reserving SSDT table memory at [mem 0xce24ebf0-0xce250303] [ 0.002358] ACPI: Reserving IVRS table memory at [mem 0xce250308-0xce2503df] [ 0.002401] Zone ranges: [ 0.002402] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.002404] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.002406] Normal [mem 0x0000000100000000-0x000000082effffff] [ 0.002407] Movable zone start for each node [ 0.002408] Early memory node ranges [ 0.002408] node 0: [mem 0x0000000000001000-0x000000000009ffff] [ 0.002410] node 0: [mem 0x0000000000100000-0x00000000ce1fefff] [ 0.002411] node 0: [mem 0x00000000cf156000-0x00000000cf156fff] [ 0.002412] node 0: [mem 0x00000000cf35d000-0x00000000cf7fffff] [ 0.002413] node 0: [mem 0x0000000100001000-0x000000082effffff] [ 0.002417] Initmem setup node 0 [mem 0x0000000000001000-0x000000082effffff] [ 0.002423] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.002464] On node 0, zone DMA: 96 pages in unavailable ranges [ 0.003333] On node 0, zone DMA32: 3927 pages in unavailable ranges [ 0.003333] On node 0, zone DMA32: 518 pages in unavailable ranges [ 0.003333] On node 0, zone Normal: 2049 pages in unavailable ranges [ 0.003333] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.003333] ACPI: PM-Timer IO Port: 0x808 [ 0.003333] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.003333] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.003333] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55 [ 0.003333] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.003333] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.003333] ACPI: Using ACPI (MADT) for SMP configuration information [ 0.003333] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.003333] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.003333] [mem 0xcf800000-0xfebfffff] available for PCI devices [ 0.003333] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.003333] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.003333] percpu: Embedded 41 pages/cpu s128760 r8192 d30984 u262144 [ 0.003333] pcpu-alloc: s128760 r8192 d30984 u262144 alloc=1*2097152 [ 0.003333] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.003333] Built 1 zonelists, mobility grouping on. Total pages: 8246855 [ 0.003333] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc3-bdver2-dirty root=/dev/nvme0n1p4 ro psmouse.synaptics_intertouch=1 zswap.max_pool_percent=16 zswap.zpool=z3fold slub_debug=FZP page_poison=1 netconsole=6666@10.0.0.14/eth0,6666@10.0.0.3/70:85:C2:30:EC:01 [ 0.003333] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc3-bdver2-dirty", will be passed to user space. [ 0.003333] printk: log_buf_len individual max cpu contribution: 8192 bytes [ 0.003333] printk: log_buf_len total cpu_extra contributions: 57344 bytes [ 0.003333] printk: log_buf_len min size: 65536 bytes [ 0.003333] printk: log_buf_len: 131072 bytes [ 0.003333] printk: early log buf free: 57008(86%) [ 0.003333] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear) [ 0.003333] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear) [ 0.003333] mem auto-init: stack:all(pattern), heap alloc:off, heap free:off [ 0.003333] software IO TLB: area num 8. [ 0.003333] Memory: 3395680K/33511684K available (10240K kernel code, 631K rwdata, 2388K rodata, 1060K init, 1540K bss, 846536K reserved, 0K cma-reserved) [ 0.003333] ********************************************************** [ 0.003333] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.003333] ** ** [ 0.003333] ** This system shows unhashed kernel memory addresses ** [ 0.003333] ** via the console, logs, and other interfaces. This ** [ 0.003333] ** might reduce the security of your system. ** [ 0.003333] ** ** [ 0.003333] ** If you see this message and you are not debugging ** [ 0.003333] ** the kernel, report this immediately to your system ** [ 0.003333] ** administrator! ** [ 0.003333] ** ** [ 0.003333] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** [ 0.003333] ********************************************************** [ 0.003333] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.003333] rcu: Hierarchical RCU implementation. [ 0.003333] Tracing variant of Tasks RCU enabled. [ 0.003333] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.003333] NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 16 [ 0.003333] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.003333] kfence: initialized - using 2097152 bytes for 255 objects at 0xffff8c588ba00000-0xffff8c588bc00000 [ 0.003333] Console: colour dummy device 80x25 [ 0.003333] printk: console [tty0] enabled [ 0.003333] ACPI: Core revision 20221020 [ 0.003333] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.003333] APIC: Switch to symmetric I/O mode setup [ 0.003333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.003333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39edbc03e43, max_idle_ns: 440795229915 ns [ 0.643338] Calibrating delay loop (skipped), value calculated using timer frequency.. 8040.50 BogoMIPS (lpj=13396000) [ 0.643343] pid_max: default: 32768 minimum: 301 [ 0.679751] LSM: initializing lsm=capability,yama [ 0.679764] Yama: becoming mindful. [ 0.679970] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.680113] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.680554] LVT offset 1 assigned for vector 0xf9 [ 0.680562] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512 [ 0.680565] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0 [ 0.680572] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.680577] Spectre V2 : Mitigation: Retpolines [ 0.680580] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.680583] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT [ 0.680585] Spectre V2 : Enabling Speculation Barrier for firmware calls [ 0.680587] RETBleed: Mitigation: untrained return thunk [ 0.680591] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.680596] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.684174] Freeing SMP alternatives memory: 32K [ 0.791133] smpboot: CPU0: AMD FX-8370 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0) [ 0.791381] cblist_init_generic: Setting adjustable number of callback queues. [ 0.791386] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.791416] Performance Events: Fam15h core perfctr, AMD PMU driver. [ 0.791436] ... version: 0 [ 0.791438] ... bit width: 48 [ 0.791441] ... generic registers: 6 [ 0.791443] ... value mask: 0000ffffffffffff [ 0.791445] ... max period: 00007fffffffffff [ 0.791448] ... fixed-purpose events: 0 [ 0.791450] ... event mask: 000000000000003f [ 0.791543] rcu: Hierarchical SRCU implementation. [ 0.791546] rcu: Max phase no-delay instances is 1000. [ 0.791617] MCE: In-kernel MCE decoding enabled. [ 0.791695] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.791847] smp: Bringing up secondary CPUs ... [ 0.792000] x86: Booting SMP configuration: [ 0.792003] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.852306] smp: Brought up 1 node, 8 CPUs [ 0.852306] smpboot: Max logical packages: 1 [ 0.852306] smpboot: Total of 8 processors activated (64326.00 BogoMIPS) [ 4.441562] node 0 deferred pages initialised in 3587ms [ 4.458451] allocated 67108864 bytes of page_ext [ 4.458823] devtmpfs: initialized [ 4.458823] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 4.458823] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 4.458823] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 4.460067] thermal_sys: Registered thermal governor 'step_wise' [ 4.460068] thermal_sys: Registered thermal governor 'user_space' [ 4.460089] cpuidle: using governor menu [ 4.460116] PCI: Using configuration type 1 for base access [ 4.460116] PCI: Using configuration type 1 for extended access [ 4.460509] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 4.460509] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page [ 4.460509] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 4.460509] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page [ 4.516670] raid6: sse2x4 gen() 9928 MB/s [ 4.573336] raid6: sse2x2 gen() 8383 MB/s [ 4.630003] raid6: sse2x1 gen() 6911 MB/s [ 4.630006] raid6: using algorithm sse2x4 gen() 9928 MB/s [ 4.686671] raid6: .... xor() 4163 MB/s, rmw enabled [ 4.686674] raid6: using ssse3x2 recovery algorithm [ 4.686843] ACPI: Added _OSI(Module Device) [ 4.686846] ACPI: Added _OSI(Processor Device) [ 4.686849] ACPI: Added _OSI(3.0 _SCP Extensions) [ 4.686852] ACPI: Added _OSI(Processor Aggregator Device) [ 4.699470] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 4.702271] ACPI: Interpreter enabled [ 4.702282] ACPI: PM: (supports S0 S5) [ 4.702285] ACPI: Using IOAPIC for interrupt routing [ 4.702624] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 4.702628] PCI: Using E820 reservations for host bridge windows [ 4.703147] ACPI: Enabled 10 GPEs in block 00 to 1F [ 4.718592] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 4.718601] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] [ 4.718615] acpi PNP0A08:00: _OSC: OS requested [PME AER PCIeCapability LTR] [ 4.718619] acpi PNP0A08:00: _OSC: platform willing to grant [PME AER PCIeCapability LTR] [ 4.718623] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND) [ 4.719105] PCI host bridge to bus 0000:00 [ 4.719109] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 4.719114] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 4.719118] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 4.719121] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 4.719125] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window] [ 4.719130] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window] [ 4.719134] pci_bus 0000:00: root bus resource [bus 00-ff] [ 4.719166] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000 [ 4.719312] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600 [ 4.719464] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400 [ 4.719512] pci 0000:00:02.0: enabling Extended Tags [ 4.719541] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 4.719673] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400 [ 4.719691] pci 0000:00:04.0: enabling Extended Tags [ 4.719719] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 4.719846] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400 [ 4.719865] pci 0000:00:06.0: enabling Extended Tags [ 4.719892] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 4.720013] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400 [ 4.720032] pci 0000:00:09.0: enabling Extended Tags [ 4.720059] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold [ 4.720200] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601 [ 4.720214] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047] [ 4.720223] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033] [ 4.720232] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027] [ 4.720241] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013] [ 4.720250] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f] [ 4.720259] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff] [ 4.720399] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 [ 4.720414] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff] [ 4.720578] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 [ 4.720592] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff] [ 4.720656] pci 0000:00:12.2: supports D1 D2 [ 4.720659] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 4.720774] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 [ 4.720788] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff] [ 4.720943] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 [ 4.720958] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff] [ 4.721022] pci 0000:00:13.2: supports D1 D2 [ 4.721025] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 4.721140] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 [ 4.721306] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 [ 4.721324] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit] [ 4.721378] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 4.721490] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 [ 4.721681] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 [ 4.721816] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310 [ 4.721831] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff] [ 4.721987] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 [ 4.722019] pci 0000:00:15.0: enabling Extended Tags [ 4.722059] pci 0000:00:15.0: supports D1 D2 [ 4.722184] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 [ 4.722215] pci 0000:00:15.1: enabling Extended Tags [ 4.722254] pci 0000:00:15.1: supports D1 D2 [ 4.722390] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 [ 4.722405] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff] [ 4.722550] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 [ 4.722565] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff] [ 4.722629] pci 0000:00:16.2: supports D1 D2 [ 4.722632] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 4.722750] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000 [ 4.722819] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000 [ 4.722899] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000 [ 4.722965] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000 [ 4.723044] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000 [ 4.723113] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000 [ 4.723243] pci 0000:01:00.0: [1002:6758] type 00 class 0x030000 [ 4.723261] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 4.723274] pci 0000:01:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit] [ 4.723283] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff] [ 4.723297] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref] [ 4.723305] pci 0000:01:00.0: enabling Extended Tags [ 4.723325] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 4.723363] pci 0000:01:00.0: supports D1 D2 [ 4.723462] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300 [ 4.723480] pci 0000:01:00.1: reg 0x10: [mem 0xfea40000-0xfea43fff 64bit] [ 4.723515] pci 0000:01:00.1: enabling Extended Tags [ 4.723564] pci 0000:01:00.1: supports D1 D2 [ 4.723675] pci 0000:00:02.0: PCI bridge to [bus 01] [ 4.723680] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 4.723684] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 4.723689] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 4.723744] pci 0000:02:00.0: [1b21:2142] type 00 class 0x0c0330 [ 4.723762] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit] [ 4.723801] pci 0000:02:00.0: enabling Extended Tags [ 4.723860] pci 0000:02:00.0: PME# supported from D0 [ 4.723892] pci 0000:02:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:04.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link) [ 4.723975] pci 0000:00:04.0: PCI bridge to [bus 02] [ 4.723981] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 4.724043] pci 0000:03:00.0: [15b7:5009] type 00 class 0x010802 [ 4.724061] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe803fff 64bit] [ 4.724085] pci 0000:03:00.0: reg 0x20: [mem 0xfe804000-0xfe8040ff 64bit] [ 4.724202] pci 0000:03:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:06.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link) [ 4.724306] pci 0000:00:06.0: PCI bridge to [bus 03] [ 4.724311] pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 4.724393] pci 0000:04:00.0: [1b21:1343] type 00 class 0x0c0330 [ 4.724411] pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe707fff 64bit] [ 4.724450] pci 0000:04:00.0: enabling Extended Tags [ 4.724514] pci 0000:04:00.0: PME# supported from D3hot D3cold [ 4.724694] pci 0000:00:09.0: PCI bridge to [bus 04] [ 4.724699] pci 0000:00:09.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 4.724712] pci_bus 0000:05: extended config space not accessible [ 4.724771] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode) [ 4.724779] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode) [ 4.724784] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode) [ 4.724788] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode) [ 4.724792] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode) [ 4.724796] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode) [ 4.724801] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode) [ 4.724870] pci 0000:06:00.0: [1969:e0a1] type 00 class 0x020000 [ 4.724897] pci 0000:06:00.0: reg 0x10: [mem 0xfe600000-0xfe63ffff 64bit] [ 4.724909] pci 0000:06:00.0: reg 0x18: [io 0xd000-0xd07f] [ 4.724968] pci 0000:06:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format) [ 4.725028] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.725152] pci 0000:00:15.0: PCI bridge to [bus 06] [ 4.725158] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff] [ 4.725163] pci 0000:00:15.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 4.725225] pci 0000:07:00.0: [1106:3483] type 00 class 0x0c0330 [ 4.725246] pci 0000:07:00.0: reg 0x10: [mem 0xfe500000-0xfe500fff 64bit] [ 4.725337] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 4.725425] pci 0000:00:15.1: PCI bridge to [bus 07] [ 4.725432] pci 0000:00:15.1: bridge window [mem 0xfe500000-0xfe5fffff] [ 4.725461] pci_bus 0000:00: on NUMA node 0 [ 4.726359] ACPI: PCI: Interrupt link LNKA configured for IRQ 0 [ 4.726518] ACPI: PCI: Interrupt link LNKB configured for IRQ 0 [ 4.726686] ACPI: PCI: Interrupt link LNKC configured for IRQ 0 [ 4.726876] ACPI: PCI: Interrupt link LNKD configured for IRQ 0 [ 4.727018] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 4.727130] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 4.727241] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 4.727359] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 4.727611] iommu: Default domain type: Translated [ 4.727614] iommu: DMA domain TLB invalidation policy: lazy mode [ 4.727792] SCSI subsystem initialized [ 4.727824] libata version 3.00 loaded. [ 4.727861] EDAC MC: Ver: 3.0.0 [ 4.727971] efivars: Registered efivars operations [ 4.727971] PCI: Using ACPI for IRQ routing [ 4.727971] PCI: pci_cache_line_size set to 64 bytes [ 4.727971] e820: reserve RAM buffer [mem 0xce1ff000-0xcfffffff] [ 4.727971] e820: reserve RAM buffer [mem 0xcf157000-0xcfffffff] [ 4.727971] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff] [ 4.727971] e820: reserve RAM buffer [mem 0x82f000000-0x82fffffff] [ 4.727971] pci 0000:01:00.0: vgaarb: setting as boot VGA device [ 4.727971] pci 0000:01:00.0: vgaarb: bridge control possible [ 4.727971] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 4.727971] vgaarb: loaded [ 4.727971] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 4.727971] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 4.730091] clocksource: Switched to clocksource tsc-early [ 4.730423] pnp: PnP ACPI init [ 4.730590] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 4.731195] system 00:01: [io 0x040b] has been reserved [ 4.731200] system 00:01: [io 0x04d6] has been reserved [ 4.731204] system 00:01: [io 0x0c00-0x0c01] has been reserved [ 4.731208] system 00:01: [io 0x0c14] has been reserved [ 4.731212] system 00:01: [io 0x0c50-0x0c51] has been reserved [ 4.731216] system 00:01: [io 0x0c52] has been reserved [ 4.731220] system 00:01: [io 0x0c6c] has been reserved [ 4.731224] system 00:01: [io 0x0c6f] has been reserved [ 4.731228] system 00:01: [io 0x0cd0-0x0cd1] has been reserved [ 4.731231] system 00:01: [io 0x0cd2-0x0cd3] has been reserved [ 4.731241] system 00:01: [io 0x0cd4-0x0cd5] has been reserved [ 4.731245] system 00:01: [io 0x0cd6-0x0cd7] has been reserved [ 4.731249] system 00:01: [io 0x0cd8-0x0cdf] has been reserved [ 4.731252] system 00:01: [io 0x0800-0x089f] has been reserved [ 4.731256] system 00:01: [io 0x0b20-0x0b3f] has been reserved [ 4.731260] system 00:01: [io 0x0900-0x090f] has been reserved [ 4.731264] system 00:01: [io 0x0910-0x091f] has been reserved [ 4.731267] system 00:01: [io 0xfe00-0xfefe] has been reserved [ 4.731273] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 4.731278] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 4.731286] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved [ 4.731291] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved [ 4.731296] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved [ 4.731301] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved [ 4.731306] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved [ 4.731660] system 00:02: [io 0x0220-0x0227] has been reserved [ 4.731665] system 00:02: [io 0x0228-0x0237] has been reserved [ 4.731672] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 4.732201] system 00:04: [io 0x04d0-0x04d1] has been reserved [ 4.732530] system 00:06: [mem 0xfeb20000-0xfeb23fff] has been reserved [ 4.732704] system 00:07: [mem 0xfec20000-0xfec200ff] could not be reserved [ 4.732965] pnp: PnP ACPI: found 8 devices [ 4.740543] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 4.740601] NET: Registered PF_INET protocol family [ 4.741172] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 4.744368] tcp_listen_portaddr_hash hash table entries: 16384 (order: 7, 524288 bytes, linear) [ 4.744468] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 4.744872] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear) [ 4.745842] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes, linear) [ 4.746792] TCP: Hash tables configured (established 262144 bind 65536) [ 4.747306] UDP hash table entries: 16384 (order: 8, 1572864 bytes, linear) [ 4.747855] UDP-Lite hash table entries: 16384 (order: 8, 1572864 bytes, linear) [ 4.748051] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 4.748084] pci 0000:00:02.0: PCI bridge to [bus 01] [ 4.748090] pci 0000:00:02.0: bridge window [io 0xe000-0xefff] [ 4.748095] pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff] [ 4.748099] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 4.748104] pci 0000:00:04.0: PCI bridge to [bus 02] [ 4.748108] pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 4.748113] pci 0000:00:06.0: PCI bridge to [bus 03] [ 4.748117] pci 0000:00:06.0: bridge window [mem 0xfe800000-0xfe8fffff] [ 4.748122] pci 0000:00:09.0: PCI bridge to [bus 04] [ 4.748126] pci 0000:00:09.0: bridge window [mem 0xfe700000-0xfe7fffff] [ 4.748132] pci 0000:00:14.4: PCI bridge to [bus 05] [ 4.748142] pci 0000:00:15.0: PCI bridge to [bus 06] [ 4.748145] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff] [ 4.748150] pci 0000:00:15.0: bridge window [mem 0xfe600000-0xfe6fffff] [ 4.748157] pci 0000:00:15.1: PCI bridge to [bus 07] [ 4.748162] pci 0000:00:15.1: bridge window [mem 0xfe500000-0xfe5fffff] [ 4.748170] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 4.748174] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 4.748177] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 4.748180] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 4.748183] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window] [ 4.748186] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xffffffff window] [ 4.748190] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 4.748193] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 4.748196] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 4.748199] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff] [ 4.748203] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff] [ 4.748206] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff] [ 4.748210] pci_bus 0000:05: resource 4 [io 0x0000-0x03af window] [ 4.748213] pci_bus 0000:05: resource 5 [io 0x03e0-0x0cf7 window] [ 4.748216] pci_bus 0000:05: resource 6 [io 0x03b0-0x03df window] [ 4.748219] pci_bus 0000:05: resource 7 [io 0x0d00-0xffff window] [ 4.748222] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000dffff window] [ 4.748225] pci_bus 0000:05: resource 9 [mem 0xd0000000-0xffffffff window] [ 4.748229] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 4.748232] pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe6fffff] [ 4.748235] pci_bus 0000:07: resource 1 [mem 0xfe500000-0xfe5fffff] [ 4.750292] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0 [ 4.750302] pci 0000:02:00.0: PME# does not work under D0, disabling it [ 4.751093] PCI: CLS 64 bytes, default 64 [ 4.751175] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0 [ 4.752506] pci 0000:00:00.0: Adding to iommu group 0 [ 4.752533] pci 0000:00:02.0: Adding to iommu group 1 [ 4.752554] pci 0000:00:04.0: Adding to iommu group 2 [ 4.752575] pci 0000:00:06.0: Adding to iommu group 3 [ 4.752599] pci 0000:00:09.0: Adding to iommu group 4 [ 4.752620] pci 0000:00:11.0: Adding to iommu group 5 [ 4.752655] pci 0000:00:12.0: Adding to iommu group 6 [ 4.752677] pci 0000:00:12.2: Adding to iommu group 6 [ 4.752720] pci 0000:00:13.0: Adding to iommu group 7 [ 4.752739] pci 0000:00:13.2: Adding to iommu group 7 [ 4.752765] pci 0000:00:14.0: Adding to iommu group 8 [ 4.752790] pci 0000:00:14.2: Adding to iommu group 9 [ 4.752823] pci 0000:00:14.3: Adding to iommu group 10 [ 4.752843] pci 0000:00:14.4: Adding to iommu group 11 [ 4.752872] pci 0000:00:14.5: Adding to iommu group 12 [ 4.752906] pci 0000:00:15.0: Adding to iommu group 13 [ 4.752927] pci 0000:00:15.1: Adding to iommu group 13 [ 4.752961] pci 0000:00:16.0: Adding to iommu group 14 [ 4.752986] pci 0000:00:16.2: Adding to iommu group 14 [ 4.753032] pci 0000:01:00.0: Adding to iommu group 15 [ 4.753055] pci 0000:01:00.1: Adding to iommu group 15 [ 4.753076] pci 0000:02:00.0: Adding to iommu group 16 [ 4.753101] pci 0000:03:00.0: Adding to iommu group 17 [ 4.753123] pci 0000:04:00.0: Adding to iommu group 18 [ 4.753132] pci 0000:06:00.0: Adding to iommu group 13 [ 4.753141] pci 0000:07:00.0: Adding to iommu group 13 [ 4.760961] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 4.761089] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 4.761092] software IO TLB: mapped [mem 0x00000000bf076000-0x00000000c3076000] (64MB) [ 4.761134] LVT offset 0 assigned for vector 0x400 [ 4.761218] perf: AMD IBS detected (0x000000ff) [ 4.761796] Initialise system trusted keyrings [ 4.761866] workingset: timestamp_bits=46 max_order=23 bucket_order=0 [ 4.762335] NET: Registered PF_ALG protocol family [ 4.762339] xor: automatically using best checksumming function avx [ 4.762343] Key type asymmetric registered [ 4.762346] Asymmetric key parser 'x509' registered [ 4.763681] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 4.763720] io scheduler kyber registered [ 4.766263] IPMI message handler: version 39.2 [ 4.767716] ahci 0000:00:11.0: version 3.0 [ 4.767812] nvme nvme0: pci function 0000:03:00.0 [ 4.767915] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 4.767923] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs [ 4.768361] scsi host0: ahci [ 4.768572] scsi host1: ahci [ 4.768673] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19 [ 4.768678] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19 [ 4.779178] alx 0000:06:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [1c:1b:0d:93:c2:07] [ 4.779212] rtc_cmos 00:03: RTC can wake from S4 [ 4.779426] rtc_cmos 00:03: registered as rtc0 [ 4.779439] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.779510] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x300000 bytes [ 4.779514] simple-framebuffer simple-framebuffer.0: format=x8r8g8b8, mode=1024x768x32, linelength=4096 [ 4.781709] Console: switching to colour frame buffer device 128x48 [ 4.783215] nvme nvme0: allocated 32 MiB host memory buffer. [ 4.783805] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered! [ 4.783969] NET: Registered PF_INET6 protocol family [ 4.784287] nvme nvme0: 8/0/0 default/read/poll queues [ 4.784500] Segment Routing with IPv6 [ 4.784554] In-situ OAM (IOAM) with IPv6 [ 4.784595] NET: Registered PF_PACKET protocol family [ 4.785414] microcode: microcode updated early to new patch_level=0x06000852 [ 4.785484] microcode: CPU1: patch_level=0x06000852 [ 4.785490] microcode: CPU0: patch_level=0x06000852 [ 4.785490] microcode: CPU3: patch_level=0x06000852 [ 4.785493] microcode: CPU5: patch_level=0x06000852 [ 4.785494] microcode: CPU6: patch_level=0x06000852 [ 4.785502] microcode: CPU2: patch_level=0x06000852 [ 4.785572] microcode: CPU4: patch_level=0x06000852 [ 4.785579] microcode: CPU7: patch_level=0x06000852 [ 4.785674] microcode: Microcode Update Driver: v2.2. [ 4.785678] IPI shorthand broadcast: enabled [ 4.788826] sched_clock: Marking stable (4163339239, 623336192)->(4798354889, -11679458) [ 4.789017] registered taskstats version 1 [ 4.789131] nvme0n1: p1 p2 p3 p4 p5 p6 [ 4.789309] Loading compiled-in X.509 certificates [ 4.795458] zswap: loaded using pool zstd/z3fold [ 4.801843] debug_vm_pgtable: [debug_vm_pgtable ]: Validating architecture page table helpers [ 5.079810] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 5.080669] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.082255] ata1.00: ATA-9: HP SSD S700 Pro 1TB, R0201B, max UDMA/100 [ 5.083065] ata1.00: 2000409264 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 5.083896] ata2.00: ATAPI: PIONEER BD-RW BDR-208D, 1.50, max UDMA/100 [ 5.084990] ata1.00: Features: Dev-Sleep [ 5.086247] ata1.00: configured for UDMA/100 [ 5.087241] scsi 0:0:0:0: Direct-Access ATA HP SSD S700 Pro 1B PQ: 0 ANSI: 5 [ 5.088151] ata2.00: configured for UDMA/100 [ 5.088583] sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB) [ 5.089760] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 5.090576] sd 0:0:0:0: [sda] Write Protect is off [ 5.091340] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 5.091356] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 5.092177] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes [ 5.094683] sda: sda1 [ 5.095560] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 5.100218] scsi 1:0:0:0: CD-ROM PIONEER BD-RW BDR-208D 1.50 PQ: 0 ANSI: 5 [ 5.185414] Btrfs loaded, crc32c=crc32c-intel, zoned=no, fsverity=no [ 5.367361] netpoll: netconsole: local port 6666 [ 5.368157] netpoll: netconsole: local IPv4 address 10.0.0.14 [ 5.368938] netpoll: netconsole: interface 'eth0' [ 5.369673] netpoll: netconsole: remote port 6666 [ 5.370420] netpoll: netconsole: remote IPv4 address 10.0.0.3 [ 5.371155] netpoll: netconsole: remote ethernet address 70:85:c2:30:ec:01 [ 5.371863] netpoll: netconsole: device eth0 not up yet, forcing it [ 5.770008] tsc: Refined TSC clocksource calibration: 4018.625 MHz [ 5.770716] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39ed1687aa7, max_idle_ns: 440795234189 ns [ 5.771505] clocksource: Switched to clocksource tsc [ 6.252194] alx 0000:06:00.0 eth0: NIC Up: 100 Mbps Full [ 6.253141] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 6.254161] printk: console [netcon0] enabled [ 6.260155] netconsole: network logging started [ 6.261996] BTRFS: device label bdver2_musl devid 1 transid 98056 /dev/root scanned by swapper/0 (1) [ 6.262980] BTRFS info (device nvme0n1p4): using xxhash64 (xxhash64-generic) checksum algorithm [ 6.263777] BTRFS info (device nvme0n1p4): using free space tree [ 6.270280] BTRFS info (device nvme0n1p4): enabling ssd optimizations [ 6.271082] BTRFS info (device nvme0n1p4): auto enabling async discard [ 6.272649] VFS: Mounted root (btrfs filesystem) readonly on device 0:16. [ 6.274175] devtmpfs: mounted [ 6.275380] Freeing unused kernel image (initmem) memory: 1060K [ 6.286698] Write protecting the kernel read-only data: 14336k [ 6.288114] Freeing unused kernel image (rodata/data gap) memory: 1708K [ 6.291248] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 6.292124] rodata_test: all tests were successful [ 6.292970] kallsyms_selftest: start [ 6.292974] Run /sbin/init as init process [ 6.294706] with arguments: [ 6.294707] /sbin/init [ 6.294708] with environment: [ 6.294710] HOME=/ [ 6.294711] TERM=linux [ 6.294712] BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc3-bdver2-dirty [ 7.826610] kallsyms_selftest: --------------------------------------------------------- [ 7.827325] kallsyms_selftest: | nr_symbols | compressed size | original size | ratio(%) | [ 7.828068] kallsyms_selftest: |---------------------------------------------------------| [ 7.828822] kallsyms_selftest: | 34969 | 380937 | 655579 | 58.10 | [ 7.828828] kallsyms_selftest: --------------------------------------------------------- [ 8.060246] kallsyms_selftest: kallsyms_lookup_name() looked up 34969 symbols [ 8.060250] kallsyms_selftest: The time spent on each symbol is (ns): min=1059, max=25595, avg=6460 [ 8.064434] kallsyms_selftest: kallsyms_on_each_symbol() traverse all: 4180780 ns [ 8.064443] kallsyms_selftest: kallsyms_on_each_match_symbol() traverse all: 6817 ns [ 8.064445] kallsyms_selftest: finish [ 8.084090] ACPI: \_PR_.P001: Found 2 idle states [ 8.085559] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 8.085566] ACPI: button: Power Button [PWRB] [ 8.087626] ACPI: \_PR_.P002: Found 2 idle states [ 8.088036] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 8.088042] ACPI: button: Power Button [PWRF] [ 8.089926] ACPI: bus type USB registered [ 8.090001] usbcore: registered new interface driver usbfs [ 8.090040] usbcore: registered new interface driver hub [ 8.090077] usbcore: registered new device driver usb [ 8.093854] ACPI: \_PR_.P003: Found 2 idle states [ 8.097176] ACPI: \_PR_.P004: Found 2 idle states [ 8.099415] QUIRK: Enable AMD PLL fix [ 8.099440] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 8.099561] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1 [ 8.102182] ACPI: \_PR_.P005: Found 2 idle states [ 8.103855] ACPI: \_PR_.P006: Found 2 idle states [ 8.104691] ACPI: \_PR_.P007: Found 2 idle states [ 8.108897] ACPI: \_PR_.P008: Found 2 idle states [ 8.111716] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 8.111757] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection [ 8.116422] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 8.136032] alx 0000:06:00.0 enp6s0: renamed from eth0 (while UP) [ 8.141671] cryptd: max_cpu_qlen set to 1000 [ 8.154520] xhci_hcd 0000:02:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010 [ 8.154926] xhci_hcd 0000:02:00.0: xHCI Host Controller [ 8.154933] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2 [ 8.154939] ehci-pci 0000:00:13.2: EHCI Host Controller [ 8.154941] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 8.154955] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3 [ 8.154964] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 8.154973] ehci-pci 0000:00:13.2: debug port 1 [ 8.155034] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 8.155038] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.155041] usb usb1: Product: xHCI Host Controller [ 8.155042] usb usb1: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty xhci-hcd [ 8.155044] usb usb1: SerialNumber: 0000:02:00.0 [ 8.155064] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000 [ 8.155274] hub 1-0:1.0: USB hub found [ 8.155290] hub 1-0:1.0: 2 ports detected [ 8.155494] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 8.155552] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03 [ 8.155555] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.155557] usb usb2: Product: xHCI Host Controller [ 8.155559] usb usb2: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty xhci-hcd [ 8.155560] usb usb2: SerialNumber: 0000:02:00.0 [ 8.155755] hub 2-0:1.0: USB hub found [ 8.155769] hub 2-0:1.0: 2 ports detected [ 8.157912] BTRFS: device label ubuntu devid 1 transid 869 /dev/nvme0n1p3 scanned by (udev-worker) (699) [ 8.162604] BTRFS info: devid 1 device path /dev/root changed to /dev/nvme0n1p4 scanned by (udev-worker) (689) [ 8.170294] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 8.170409] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 8.170412] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.170415] usb usb3: Product: EHCI Host Controller [ 8.170416] usb usb3: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty ehci_hcd [ 8.170418] usb usb3: SerialNumber: 0000:00:13.2 [ 8.170682] hub 3-0:1.0: USB hub found [ 8.170703] hub 3-0:1.0: 5 ports detected [ 8.171087] ehci-pci 0000:00:16.2: EHCI Host Controller [ 8.171109] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 4 [ 8.171117] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 8.171126] ehci-pci 0000:00:16.2: debug port 1 [ 8.171177] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000 [ 8.171927] BTRFS: device label bisect_x86-64-v2 devid 1 transid 34531 /dev/nvme0n1p5 scanned by (udev-worker) (699) [ 8.176471] BTRFS: device label distfiles devid 1 transid 30 /dev/nvme0n1p6 scanned by (udev-worker) (689) [ 8.186692] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 8.186821] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 8.186834] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.186838] usb usb4: Product: EHCI Host Controller [ 8.186840] usb usb4: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty ehci_hcd [ 8.186843] usb usb4: SerialNumber: 0000:00:16.2 [ 8.187131] hub 4-0:1.0: USB hub found [ 8.187163] hub 4-0:1.0: 4 ports detected [ 8.187558] ehci-pci 0000:00:12.2: EHCI Host Controller [ 8.187568] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5 [ 8.187576] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 8.187585] ehci-pci 0000:00:12.2: debug port 1 [ 8.187642] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000 [ 8.189106] AVX version of gcm_enc/dec engaged. [ 8.189148] AES CTR mode by8 optimization enabled [ 8.203356] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 8.203496] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 8.203501] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.203503] usb usb5: Product: EHCI Host Controller [ 8.203505] usb usb5: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty ehci_hcd [ 8.203507] usb usb5: SerialNumber: 0000:00:12.2 [ 8.203724] hub 5-0:1.0: USB hub found [ 8.203742] hub 5-0:1.0: 5 ports detected [ 8.204103] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 8.204104] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 8.204117] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6 [ 8.204136] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7 [ 8.204175] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000 [ 8.209979] acpi_cpufreq: overriding BIOS provided _PSD data [ 8.222852] ACPI: bus type drm_connector registered [ 8.263726] xhci_hcd 0000:04:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x0000000000000010 [ 8.264149] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03 [ 8.264157] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.264161] usb usb6: Product: OHCI PCI host controller [ 8.264166] usb usb6: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty ohci_hcd [ 8.264169] usb usb6: SerialNumber: 0000:00:12.0 [ 8.272362] xhci_hcd 0000:04:00.0: xHCI Host Controller [ 8.278263] hub 6-0:1.0: USB hub found [ 8.278292] hub 6-0:1.0: 5 ports detected [ 8.285610] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000 [ 8.285641] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input2 [ 8.286260] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 8.286274] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 8.286279] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 8.286284] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0 [ 8.286287] snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e [ 8.286291] snd_hda_codec_realtek hdaudioC0D0: inputs: [ 8.286294] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19 [ 8.286298] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18 [ 8.286302] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a [ 8.291025] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 8.291038] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8 [ 8.291091] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000 [ 8.291201] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9 [ 8.291241] xhci_hcd 0000:04:00.0: Host supports USB 3.1 Enhanced SuperSpeed [ 8.291358] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03 [ 8.291363] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.291368] usb usb7: Product: xHCI Host Controller [ 8.291372] usb usb7: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty xhci-hcd [ 8.291375] usb usb7: SerialNumber: 0000:04:00.0 [ 8.298127] hub 7-0:1.0: USB hub found [ 8.298151] hub 7-0:1.0: 2 ports detected [ 8.300975] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM. [ 8.301051] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03 [ 8.301056] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.301059] usb usb9: Product: xHCI Host Controller [ 8.301062] usb usb9: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty xhci-hcd [ 8.301065] usb usb9: SerialNumber: 0000:04:00.0 [ 8.306357] hub 9-0:1.0: USB hub found [ 8.306374] hub 9-0:1.0: 2 ports detected [ 8.306783] xhci_hcd 0000:07:00.0: xHCI Host Controller [ 8.306791] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 10 [ 8.311622] xhci_hcd 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000e address=0xce210880 flags=0x0000] [ 8.312461] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3 [ 8.313216] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 [ 8.313508] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 8.314085] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 8.314375] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 8.315274] sr 1:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray [ 8.315283] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 8.316142] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 8.316342] it87: Found IT8620E chip at 0x228, revision 4 [ 8.316380] it87: Beeping is supported [ 8.316381] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 8.317382] [drm] radeon kernel modesetting enabled. [ 8.320190] Console: switching to colour dummy device 80x25 [ 8.321181] radeon 0000:01:00.0: vgaarb: deactivate vga console [ 8.327287] [drm] initializing kernel modesetting (TURKS 0x1002:0x6758 0x174B:0xE194 0x00). [ 8.327418] ATOM BIOS: TURKS [ 8.327624] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 8.327628] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 8.327634] [drm] Detected VRAM RAM=1024M, BAR=256M [ 8.327636] [drm] RAM width 128bits DDR [ 8.327722] [drm] radeon: 1024M of VRAM memory ready [ 8.327725] [drm] radeon: 1024M of GTT memory ready. [ 8.327737] [drm] Loading TURKS Microcode [ 8.329160] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.329270] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 8.333123] [drm] Internal thermal controller without fan control [ 8.337065] Asymmetric key parser 'pkcs8' registered [ 8.338317] [drm] radeon: dpm initialized [ 8.340102] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 8.341441] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 8.347562] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000). [ 8.347676] radeon 0000:01:00.0: WB enabled [ 8.347679] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 [ 8.347681] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c [ 8.348424] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 [ 8.348785] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 8.348888] radeon 0000:01:00.0: radeon: using MSI. [ 8.348951] [drm] radeon: irq initialized. [ 8.350832] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03 [ 8.350841] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.350845] usb usb8: Product: OHCI PCI host controller [ 8.350849] usb usb8: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty ohci_hcd [ 8.350852] usb usb8: SerialNumber: 0000:00:13.0 [ 8.351182] hub 8-0:1.0: USB hub found [ 8.351196] hub 8-0:1.0: 5 ports detected [ 8.351705] ohci-pci 0000:00:14.5: OHCI PCI host controller [ 8.351714] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 11 [ 8.351753] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000 [ 8.365702] [drm] ring test on 0 succeeded in 2 usecs [ 8.365717] [drm] ring test on 3 succeeded in 5 usecs [ 8.410986] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03 [ 8.410993] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.410996] usb usb11: Product: OHCI PCI host controller [ 8.410999] usb usb11: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty ohci_hcd [ 8.411001] usb usb11: SerialNumber: 0000:00:14.5 [ 8.411362] hub 11-0:1.0: USB hub found [ 8.411381] hub 11-0:1.0: 2 ports detected [ 8.411916] ohci-pci 0000:00:16.0: OHCI PCI host controller [ 8.411926] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 12 [ 8.411966] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000 [ 8.470953] usb usb12: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03 [ 8.470965] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 8.470971] usb usb12: Product: OHCI PCI host controller [ 8.470977] usb usb12: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty ohci_hcd [ 8.470981] usb usb12: SerialNumber: 0000:00:16.0 [ 8.471553] hub 12-0:1.0: USB hub found [ 8.471592] hub 12-0:1.0: 4 ports detected [ 8.543019] [drm] ring test on 5 succeeded in 1 usecs [ 8.543039] [drm] UVD initialized successfully. [ 8.543531] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops radeon_audio_component_bind_ops [radeon]) [ 8.543807] [drm] ib test on ring 0 succeeded in 0 usecs [ 8.543937] [drm] ib test on ring 3 succeeded in 0 usecs [ 8.866690] usb 6-1: new low-speed USB device number 2 using ohci-pci [ 9.062999] usb 6-1: New USB device found, idVendor=046d, idProduct=c045, bcdDevice=27.30 [ 9.063005] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 9.063011] usb 6-1: Product: USB-PS/2 Optical Mouse [ 9.063015] usb 6-1: Manufacturer: Logitech [ 9.077723] alx 0000:06:00.0 enp6s0: fatal interrupt 0x200, resetting [ 9.083211] alx 0000:06:00.0 enp6s0: NIC Up: 100 Mbps Full [ 9.103720] hid: raw HID events driver (C) Jiri Kosina [ 9.111441] usbcore: registered new interface driver usbhid [ 9.111446] usbhid: USB HID core driver [ 9.121162] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/0003:046D:C045.0001/input/input10 [ 9.121374] hid-generic 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-1/input0 [ 9.210155] [drm] ib test on ring 5 succeeded [ 9.210172] stackdepot: allocating hash table of 1048576 entries via kvcalloc [ 9.216533] [drm] Radeon Display Connectors [ 9.216540] [drm] Connector 0: [ 9.216545] [drm] DP-1 [ 9.216549] [drm] HPD5 [ 9.216553] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 9.216562] [drm] Encoders: [ 9.216565] [drm] DFP1: INTERNAL_UNIPHY1 [ 9.216569] [drm] Connector 1: [ 9.216572] [drm] HDMI-A-1 [ 9.216576] [drm] HPD1 [ 9.216579] [drm] DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c [ 9.216587] [drm] Encoders: [ 9.216590] [drm] DFP2: INTERNAL_UNIPHY2 [ 9.216594] [drm] Connector 2: [ 9.216597] [drm] DVI-I-1 [ 9.216600] [drm] HPD4 [ 9.216603] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 9.216611] [drm] Encoders: [ 9.216614] [drm] DFP3: INTERNAL_UNIPHY [ 9.216617] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 9.342523] [drm] fb mappable at 0xD0363000 [ 9.342528] [drm] vram apper at 0xD0000000 [ 9.342530] [drm] size 8294400 [ 9.342532] [drm] fb depth is 24 [ 9.342534] [drm] pitch is 7680 [ 9.342761] fbcon: radeondrmfb (fb0) is primary device [ 9.483359] Console: switching to colour frame buffer device 240x67 [ 9.489400] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device [ 9.489590] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0 [ 18.306812] xhci_hcd 0000:07:00.0: can't setup: -110 [ 18.306830] xhci_hcd 0000:07:00.0: USB bus 10 deregistered [ 18.307005] xhci_hcd 0000:07:00.0: init 0000:07:00.0 fail, -110 [ 18.307010] xhci_hcd: probe of 0000:07:00.0 failed with error -110 [ 18.361810] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 18.593445] usb 6-2: new low-speed USB device number 3 using ohci-pci [ 18.807032] usb 6-2: New USB device found, idVendor=1017, idProduct=1010, bcdDevice= 1.02 [ 18.807044] usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 18.807050] usb 6-2: Product: Gaming Keyboard [ 18.826095] input: Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/0003:1017:1010.0002/input/input11 [ 18.880526] hid-generic 0003:1017:1010.0002: input,hidraw1: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:12.0-2/input0 [ 18.965164] input: Gaming Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:1017:1010.0003/input/input12 [ 18.965585] input: Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:1017:1010.0003/input/input13 [ 19.020426] input: Gaming Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:1017:1010.0003/input/input14 [ 19.020733] input: Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:1017:1010.0003/input/input15 [ 19.022068] hid-generic 0003:1017:1010.0003: input,hiddev96,hidraw2: USB HID v1.10 Mouse [Gaming Keyboard] on usb-0000:00:12.0-2/input1 [ 19.846739] random: crng init done [ 19.864178] device-mapper: uevent: version 1.0.3 [ 19.864452] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 29.144482] BTRFS: device label gehaim devid 1 transid 53810 /dev/dm-0 scanned by (udev-worker) (1213) [ 29.399621] BTRFS info (device nvme0n1p4: state M): use zstd compression, level 2 [ 29.699898] Adding 8388604k swap on /dev/nvme0n1p2. Priority:-2 extents:1 across:8388604k SSFS [ 29.782336] BTRFS info (device dm-0): using xxhash64 (xxhash64-generic) checksum algorithm [ 29.782353] BTRFS info (device dm-0): use zstd compression, level 1 [ 29.782359] BTRFS info (device dm-0): using free space tree [ 29.823600] BTRFS info (device dm-0): enabling ssd optimizations [ 29.826478] BTRFS info (device nvme0n1p6): using xxhash64 (xxhash64-generic) checksum algorithm [ 29.826503] BTRFS info (device nvme0n1p6): setting nodatasum [ 29.826508] BTRFS info (device nvme0n1p6): using free space tree [ 29.830089] BTRFS info (device nvme0n1p6): enabling ssd optimizations [ 29.830098] BTRFS info (device nvme0n1p6): auto enabling async discard [ 31.125509] alg: No test for hmac(md4) (hmac(md4-generic)) [ 31.219719] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 31.235652] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 32.484444] Bluetooth: Core ver 2.22 [ 32.484484] NET: Registered PF_BLUETOOTH protocol family [ 32.484486] Bluetooth: HCI device and connection manager initialized [ 32.484491] Bluetooth: HCI socket layer initialized [ 32.484494] Bluetooth: L2CAP socket layer initialized [ 32.484498] Bluetooth: SCO socket layer initialized [ 32.491299] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 32.491303] Bluetooth: BNEP filters: protocol multicast [ 32.491308] Bluetooth: BNEP socket layer initialized [ 35.055941] zram: Added device: zram0 [ 35.056346] zram: Added device: zram1 [ 35.056751] zram: Added device: zram2 [ 35.116831] zram2: detected capacity change from 0 to 50331648 [ 35.538839] BTRFS: device label var_tmp_dir devid 1 transid 6 /dev/zram2 scanned by mkfs.btrfs (2413) [ 35.542437] BTRFS info (device zram2): using crc32c (crc32c-intel) checksum algorithm [ 35.542446] BTRFS info (device zram2): setting nodatasum [ 35.542449] BTRFS info (device zram2): using free space tree [ 35.544429] BTRFS info (device zram2): enabling ssd optimizations [ 35.544439] BTRFS info (device zram2): auto enabling async discard [ 35.544581] BTRFS info (device zram2): checking UUID tree [ 38.569662] fuse: init (API version 7.38) [ 38.843722] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=2526 'mate-session-ch' [ 39.076695] ------------[ cut here ]------------ [ 39.076713] NETDEV WATCHDOG: enp6s0 (alx): transmit queue 1 timed out [ 39.076781] WARNING: CPU: 4 PID: 0 at net/sched/sch_generic.c:526 dev_watchdog+0x1a8/0x1b0