From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
To: Felipe Balbi <balbi@kernel.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Thinh Nguyen <Thinh.Nguyen@synopsys.com>,
linux-usb@vger.kernel.org,
Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: John Youn <John.Youn@synopsys.com>
Subject: [PATCH 1/2] usb: dwc3: core: Properly default unspecified speed
Date: Fri, 24 Jul 2020 14:01:02 -0700 [thread overview]
Message-ID: <4aa1f6dd1d4d895fcf3d987323c1e37672a71680.1595624103.git.thinhn@synopsys.com> (raw)
In-Reply-To: <cover.1595624103.git.thinhn@synopsys.com>
If the maximum_speed is not specified, default the device speed base on
its HW capability. Don't prematurely check HW capability before
validating the maximum_speed device property. The device property takes
precedence in dwc->maximum_speed.
Fixes: 0e1e5c47f7a9 ("usb: dwc3: add support for USB 2.0-only core configuration")
Reported-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
---
drivers/usb/dwc3/core.c | 35 ++++++++++++++++++-----------------
1 file changed, 18 insertions(+), 17 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 422aea24afcd..7f6f5567b118 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -930,13 +930,6 @@ static int dwc3_core_init(struct dwc3 *dwc)
*/
dwc3_writel(dwc->regs, DWC3_GUID, LINUX_VERSION_CODE);
- /* Handle USB2.0-only core configuration */
- if (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
- DWC3_GHWPARAMS3_SSPHY_IFC_DIS) {
- if (dwc->maximum_speed == USB_SPEED_SUPER)
- dwc->maximum_speed = USB_SPEED_HIGH;
- }
-
ret = dwc3_phy_setup(dwc);
if (ret)
goto err0;
@@ -1382,6 +1375,8 @@ bool dwc3_has_imod(struct dwc3 *dwc)
static void dwc3_check_params(struct dwc3 *dwc)
{
struct device *dev = dwc->dev;
+ unsigned int hwparam_gen =
+ DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3);
/* Check for proper value of imod_interval */
if (dwc->imod_interval && !dwc3_has_imod(dwc)) {
@@ -1413,17 +1408,23 @@ static void dwc3_check_params(struct dwc3 *dwc)
dwc->maximum_speed);
/* fall through */
case USB_SPEED_UNKNOWN:
- /* default to superspeed */
- dwc->maximum_speed = USB_SPEED_SUPER;
-
- /*
- * default to superspeed plus if we are capable.
- */
- if ((DWC3_IP_IS(DWC31) || DWC3_IP_IS(DWC32)) &&
- (DWC3_GHWPARAMS3_SSPHY_IFC(dwc->hwparams.hwparams3) ==
- DWC3_GHWPARAMS3_SSPHY_IFC_GEN2))
+ switch (hwparam_gen) {
+ case DWC3_GHWPARAMS3_SSPHY_IFC_GEN2:
dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
-
+ break;
+ case DWC3_GHWPARAMS3_SSPHY_IFC_GEN1:
+ if (DWC3_IP_IS(DWC32))
+ dwc->maximum_speed = USB_SPEED_SUPER_PLUS;
+ else
+ dwc->maximum_speed = USB_SPEED_SUPER;
+ break;
+ case DWC3_GHWPARAMS3_SSPHY_IFC_DIS:
+ dwc->maximum_speed = USB_SPEED_HIGH;
+ break;
+ default:
+ dwc->maximum_speed = USB_SPEED_SUPER;
+ break;
+ }
break;
}
}
--
2.11.0
next prev parent reply other threads:[~2020-07-24 21:01 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-24 21:00 [PATCH 0/2] usb: dwc3: Valid HW capability Thinh Nguyen
2020-07-24 21:01 ` Thinh Nguyen [this message]
2020-07-24 21:01 ` [PATCH 2/2] usb: dwc3: core: Print warning on unsupported speed Thinh Nguyen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4aa1f6dd1d4d895fcf3d987323c1e37672a71680.1595624103.git.thinhn@synopsys.com \
--to=thinh.nguyen@synopsys.com \
--cc=John.Youn@synopsys.com \
--cc=balbi@kernel.org \
--cc=chunfeng.yun@mediatek.com \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).