On Tue, 2020-06-09 at 13:59 +0200, Philipp Zabel wrote:
> Hi Nicolas,
> 
> 
> 
> On Tue, 2020-06-09 at 13:18 +0200, Nicolas Saenz Julienne wrote:
> 
> > Hi Florian, thanks for the reviews!
> > On Mon, 2020-06-08 at 12:43 -0700, Florian Fainelli wrote:
> > > On 6/8/2020 12:26 PM, Nicolas Saenz Julienne wrote:
> > > > Some atypical users of xhci-pci might need to manually reset their xHCI
> > > > controller before starting the HCD setup. Check if a reset controller
> > > > device is available to the PCI bus and trigger a reset.
> > > > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > > > ---
> > > >   drivers/usb/host/xhci-pci.c | 9 +++++++++
> > > >   1 file changed, 9 insertions(+)
> > > > diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
> > > > index ef513c2fb843..45f70facdfcd 100644
> > > > --- a/drivers/usb/host/xhci-pci.c
> > > > +++ b/drivers/usb/host/xhci-pci.c
> 
> [...]
> 
> > > > @@ -347,6 +349,13 @@ static int xhci_pci_probe(struct pci_dev *dev,
> > > > const
> > > > struct pci_device_id *id)
> > > >                    return retval;
> > > >    }
> > > >   
> > > > + reset = devm_reset_control_get(&dev->bus->dev, NULL);
> > > Should not this be devm_reset_control_get_optional()?
> > Yes, you're right.
> 
> 
> Please use devm_reset_control_get_optional_exclusive() while you're at
> 
> it.
> 

Will do!

Regards,
Nicolas