Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Felipe Balbi <balbi@kernel.org>
To: Dejin Zheng <zhengdejin5@gmail.com>,
	gregkh@linuxfoundation.org, linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, Dejin Zheng <zhengdejin5@gmail.com>
Subject: Re: [PATCH v1] usb: dwc3: core: fix a issue about clear connect state
Date: Tue, 27 Oct 2020 11:12:14 +0200
Message-ID: <87pn54c9sh.fsf@kernel.org> (raw)
In-Reply-To: <20201018134734.10406-1-zhengdejin5@gmail.com>

Hi,

Dejin Zheng <zhengdejin5@gmail.com> writes:
> According to Synopsys Programming Guide chapter 2.2 Register Resets,
> it cannot reset the DCTL register by set DCTL.CSFTRST for Core Soft Reset,
> if DWC3 controller as a slave device and stay connected with a usb host,
> then, reboot linux, it will fail to reinitialize dwc3 as a slave device
> when the DWC3 controller did not power off. because the connection status
> is incorrect, so we also need clear DCTL.RUN_STOP bit for disable connect
> when do core soft reset.
>
> Fixes: f59dcab176293b6 ("usb: dwc3: core: improve reset sequence")
> Signed-off-by: Dejin Zheng <zhengdejin5@gmail.com>
> ---
>  drivers/usb/dwc3/core.c | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 2eb34c8b4065..239636c454c2 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -256,6 +256,7 @@ static int dwc3_core_soft_reset(struct dwc3 *dwc)
>  
>  	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
>  	reg |= DWC3_DCTL_CSFTRST;
> +	reg &= ~DWC3_DCTL_RUN_STOP;

as I mentioned in the other thread, I would rather figure out why we're
getting to probe() with RUN_STOP already set.

-- 
balbi

      parent reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-18 13:47 Dejin Zheng
2020-10-18 17:40 ` Sergei Shtylyov
2020-10-27  9:12 ` Felipe Balbi [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87pn54c9sh.fsf@kernel.org \
    --to=balbi@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=zhengdejin5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git